METALFISH BlockCase

Contents

METALFISH BlockCase Aluminum Open Frame Case Instruction Manual

Model: BlockCase

1. Product Overview

The METALFISH BlockCase is an aluminum open-frame computer chassis designed for enthusiasts and users who prioritize airflow and easy access to components. It supports ATX and M-ATX mainboards, allows for both vertical and horizontal GPU mounting, and accommodates 180/240mm liquid coolers.

METALFISH BlockCase with components installed, showing vertical and horizontal GPU mounts.

Image: METALFISH BlockCase showcasing vertical and horizontal GPU mounting options.

METALFISH BlockCase with key features highlighted.

Image: Key features of the BlockCase, including support for ATX/MATX motherboards, GPU mounting, ATX/SFX PSUs, 180/240 liquid coolers, and 2.5/3.5 inch HDDs.

2. Package Contents

Before assembly, please verify that all components listed below are present in your package. Refer to the accessories diagram for visual identification.

Diagram of BlockCase accessories including handle, screws, fixing studs, and various brackets.

Image: Detailed view of included accessories for the BlockCase.

  • Aluminum Profiles (various lengths for crossbars and vertical bars)
  • Mainboard Fixing Studs
  • Handle
  • M4 Screws & Slide Nuts
  • Threaded Inserts & M3 Screws
  • Plastic Covers
  • GPU Bracket & Support Bracket
  • PSU Fixing Plate
  • Liquid Cooler/Fan Fixing Plate
  • HDD Fixing Plate
  • Power Switch Panel
  • Alu FootPads
  • L-shaped Slide Nuts
  • Fastening Screws

3. Assembly Instructions

Follow these steps carefully to assemble your BlockCase. Ensure all screws are tightened securely but do not overtighten.

BlockCase Installation Steps V2.0 diagram.

Image: Visual guide for BlockCase assembly, detailing aluminum profile locations and installation steps.

3.1. Aluminum Profile Location Details

Identify the aluminum profiles based on their numbering and purpose:

  1. NO.1 Cross Bar (x1)
  2. NO.2 Cross Bar (x2)
  3. NO.3 Vertical Bar (x2)
  4. NO.4 Cross Bar (x2)
  5. NO.5 Cross Bar (x2)

3.2. Step 1: Mainboard Bracket Installation

  1. Install the mainboard studs onto the crossbars.
  2. The NO.1 CrossBar is positioned at the top.
  3. The NO.2 CrossBar has three fixing positions.
  4. **How to fix vertical bar with the Cross bar:**
    • Hole#1: Closest to the edge, this end faces up.
    • Hole#2: For ITX mainboard position.
    • Hole#3: For M-ATX mainboard position.
    • Hole#4: For ATX mainboard position. If using an ATX mainboard, fix the crossbar in Hole 4.
  5. Use Threaded Inserts and M3 Screws. Ensure Threaded Inserts are tightened.

3.3. Step 2: Install the Base Bracket

Assemble the base bracket using the L-shaped Slide Nuts and Fastening Screws as shown in the diagram.

3.4. Step 3: Mainboard Bracket Fixed to the Base Bracket

  1. Align the groove insertion of the aluminum profiles.
  2. Use the fastening nut to secure the mainboard bracket and chassis bracket.
  3. Align the groove insertion of the case bracket.
  4. Secure the mainboard bracket and base bracket. The mainboard bracket can be moved left or right to adjust and then fixed.

4. Operating Your Open Frame Case

The BlockCase is designed for optimal airflow and easy access to components. Once assembled and components are installed, connect your peripherals and power supply.

  • Power On: Use the included Power Switch Panel to power on your system. Note that this panel typically provides only a power button and may not include reset or HDD/power LED indicators.
  • Component Access: The open-frame design allows for quick and easy access to all internal components for upgrades, maintenance, or troubleshooting.
  • Airflow: The open design naturally provides excellent airflow, which can help keep components cooler compared to traditional enclosed cases.
Assembled BlockCase with components, showing a vertical GPU mount and liquid cooling.

Image: An assembled BlockCase with a vertical GPU and liquid cooling setup.

Assembled BlockCase with components, showing a horizontal GPU mount and air cooling.

Image: An assembled BlockCase with a horizontal GPU and air cooling setup.

5. Maintenance

Due to its open design, the BlockCase requires regular cleaning to prevent dust buildup on components.

  • Dust Cleaning: Regularly use compressed air to blow dust off components such as CPU coolers, GPU fans, and power supply. A soft brush can also be used for stubborn dust.
  • Surface Cleaning: Wipe down the aluminum frame with a soft, dry cloth. Avoid abrasive cleaners.
  • Cable Management: Periodically check cable routing to ensure it does not obstruct airflow or interfere with fan operation.

6. Troubleshooting

  • System Not Powering On: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure the power switch panel is correctly connected to the motherboard's front panel headers.
  • Component Not Detected: Verify that all components (GPU, RAM, storage drives) are seated correctly in their respective slots and securely connected.
  • Overheating: While open frames offer good airflow, ensure fans are properly oriented to push air through radiators or over heatsinks. Check thermal paste application on CPU/GPU if temperatures are unusually high.
  • Loose Connections: Periodically inspect all screws and connections to ensure they remain tight, especially after moving the case.

7. Specifications

FeatureSpecification
Brand NameMETALFISH
Model NumberBlock Case
Case Size260x200x340 mm
Case Weight1.8 kg
MaterialAluminum alloy, Steel
Form FactorATX
Power Model SupportATX
Chassis TypeDesktops
ApplicationDesktop
Internal 2.5" Drive Bays2
Internal 3.5" Drive Bays2
Radiator Size Support240 MM (also 180mm)
GPU MountVertical or Horizontal
Fan Support9/12/14cm (depending on configuration)
Power Supply MountedBottom
RGB SupportNo RGB (case itself)
With Power SupplyNo
With FanNo
With Side Panel WindowNo
Package Length38 cm
Package Width18 cm
Package Height7 cm
Package Weight1.37 kg

8. User Tips

  • Additional Hardware: The included screws and nuts are sufficient for basic assembly. If you plan to add extra drives, brackets, or accessories, you may need to acquire additional M4 screws, slide nuts, and threaded inserts locally.
  • Power Switch Customization: The provided power switch panel is basic. Users often repurpose power/reset buttons and LEDs from old cases for enhanced functionality.
  • Test Bench Use: This open frame case is highly suitable for use as a test bench due to easy component access and excellent cooling.
  • 3D Printed Accessories: The 2020 aluminum profiles allow for the integration of custom 3D printed mounting accessories for fans, GPU supports, power buttons, HDDs, and more.
  • Pet Safety: Given the open design, ensure the case is placed in an area inaccessible to pets to prevent accidental damage or interference with components.

9. Frequently Asked Questions (FAQ)

Q: Is this structure a complete CPU?
A: No, the METALFISH BlockCase is an open-frame computer chassis (case) only. It does not include a CPU or any other computer components.
Q: Are additional mounts included for installing a water cooling radiator?
A: Yes, the case supports 180mm and 240mm liquid coolers, and includes the necessary fixing plates for installation.
Q: Does it come complete or just the structure?
A: The product includes only the open-frame structure and its assembly accessories. No computer components (like motherboard, CPU, GPU, PSU, etc.) are included.

10. Warranty and Support

For detailed warranty information, please refer to the terms provided by your retailer at the time of purchase. For further assistance or specific inquiries not covered in this manual, please contact the seller or manufacturer directly.

A comprehensive user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.