HONGWIN 59910-2T000, 59930-2T000

Contents

HONGWIN ABS Wheel Speed Sensor Instruction Manual

Models: 59910-2T000 (Rear LH), 59930-2T000 (Rear RH)

Introduction

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your HONGWIN ABS Wheel Speed Sensor. Please read this manual thoroughly before installation and retain it for future reference.

Product Overview

The HONGWIN ABS Wheel Speed Sensor is a critical component of your vehicle's Anti-lock Braking System (ABS), designed to monitor the rotational speed of the wheels and transmit this data to the ABS control unit. This ensures optimal braking performance and vehicle stability.

HONGWIN ABS Wheel Speed Sensors, Rear RH and Rear LH

Figure 1: HONGWIN ABS Wheel Speed Sensors (Rear RH 59930-2T000 and Rear LH 59910-2T000)

HONGWIN ABS Wheel Speed Sensor, Rear LH (59910-2T000)

Figure 2: HONGWIN ABS Wheel Speed Sensor, Rear LH (Part No. 59910-2T000)

HONGWIN ABS Wheel Speed Sensor, Rear RH (59930-2T000)

Figure 3: HONGWIN ABS Wheel Speed Sensor, Rear RH (Part No. 59930-2T000)

Vehicle Compatibility

This ABS Wheel Speed Sensor is compatible with the following vehicle models:

  • Kia Optima:
    • 2011-2012 (All Engine types)
    • 2013-2016 (All Engine types, without Active Brake Control)

Note: Compatibility is for reference only. Always confirm the Original Equipment (OE) number with your existing part before installation.

Specifications

Attribute Value
OEM NO. 59910-2T000 (Rear LH), 59930-2T000 (Rear RH)
Alternative Part Numbers ALS2360, 5S12360, ALS2351, 5S12832
Sensor Type Holzer
Length 860mm / 33.85 inches
Sensor Tip Diameter 28.8mm / 1.13 inches
Origin Mainland China
ABS Wheel Speed Sensor with length measurement of 860mm / 33.85 inches

Figure 4: Sensor length measurement (860mm / 33.85")

Detailed view of ABS sensor tip and electrical connector, showing 28.8mm / 1.13 inches diameter

Figure 5: Detailed view of sensor tip (28.8mm / 1.13") and connector

Installation Guide

Professional installation is highly recommended for this product. Incorrect installation can lead to malfunction of the ABS system and compromise vehicle safety.

Before Installation:

  • Verify Part: Carefully compare the new sensor with your original part. Ensure the OE number matches the listed specifications.
  • Check Dimensions: Note the dimensions and model type to ensure it is the correct fit for your vehicle.
  • Handle with Care: Take care when handling the electrical plug and sensor body to avoid damage.
  • Safety First: Ensure the vehicle is safely supported on jack stands and the battery is disconnected before beginning any work.

General Installation Steps (Consult a professional or vehicle-specific repair manual for detailed instructions):

  1. Locate the existing ABS wheel speed sensor on the rear left (LH) or rear right (RH) wheel assembly.
  2. Disconnect the electrical connector from the old sensor.
  3. Remove any mounting bolts or clips securing the old sensor and its wiring.
  4. Carefully extract the old sensor from its mounting location.
  5. Clean the mounting area thoroughly to ensure proper seating of the new sensor.
  6. Insert the new HONGWIN ABS Wheel Speed Sensor into the mounting hole.
  7. Secure the sensor with its mounting bolts/clips, ensuring it is firmly in place but not overtightened.
  8. Route the new sensor's wiring along the original path and secure it with any provided clips or ties.
  9. Connect the electrical plug to the vehicle's harness, ensuring a secure connection.
  10. Reconnect the vehicle battery.
  11. Test the ABS system by driving the vehicle and checking for any warning lights.

Operation

Once correctly installed, the HONGWIN ABS Wheel Speed Sensor operates automatically as part of your vehicle's ABS system. It continuously monitors the rotational speed of the wheel and sends this information to the ABS control module. The control module uses this data to detect if a wheel is about to lock up during braking. If a lock-up is detected, the ABS system rapidly modulates brake pressure to that wheel, preventing it from skidding and allowing the driver to maintain steering control.

No direct user interaction is required for the sensor's operation. Its function is integral to the vehicle's safety systems.

Maintenance

ABS wheel speed sensors are generally maintenance-free components. However, periodic inspection can help ensure their longevity and proper function:

  • Visual Inspection: During routine vehicle maintenance (e.g., tire rotation, brake inspection), visually inspect the sensor and its wiring for any signs of physical damage, corrosion, or loose connections.
  • Cleaning: If the sensor or its tone ring (the part it reads) appears excessively dirty, gently clean it with a soft brush and appropriate automotive cleaner. Avoid harsh chemicals or abrasive materials.
  • Wiring Integrity: Ensure the wiring harness is securely fastened and not rubbing against any moving parts or sharp edges.

If any damage is observed, or if the ABS warning light illuminates on your dashboard, consult a qualified mechanic.

Troubleshooting

If you experience issues with your ABS system, such as the ABS warning light illuminating on your dashboard, it could indicate a problem with a wheel speed sensor. Here are some general troubleshooting steps:

  • Check ABS Warning Light: If the ABS light is on, it signifies a fault in the ABS system.
  • Scan for Diagnostic Trouble Codes (DTCs): Use an OBD-II scanner to retrieve any stored ABS-related trouble codes. These codes can pinpoint the specific sensor or circuit that is malfunctioning.
  • Inspect Wiring and Connections: Visually check the sensor's wiring harness for cuts, fraying, or corrosion. Ensure the electrical connector is fully seated and free of debris.
  • Sensor Gap: In some cases, an incorrect sensor gap (distance between the sensor and the tone ring) can cause issues. This typically requires specialized tools to measure and adjust.
  • Tone Ring Damage: Inspect the tone ring (also known as the reluctor ring or ABS ring) for cracks, missing teeth, or excessive rust/debris.

Due to the critical safety function of the ABS system, it is strongly recommended to have any diagnostic and repair work performed by a certified automotive technician.

User Tips

  • Always double-check the OE part number on your original sensor against the new part to ensure perfect compatibility.
  • While DIY installation might seem appealing, the precision required for ABS components makes professional installation the safest and most reliable option.
  • When replacing one sensor, consider inspecting the others, especially if they are of similar age or have been exposed to similar conditions.

Warranty and Support

Warranty:

This HONGWIN ABS Wheel Speed Sensor comes with a ONE YEAR warranty from the date of purchase, covering manufacturing defects.

Manufacturer Contact Information:

  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China
  • Customer Service Email: inf@hwautoparts.com
  • Telephone: 86-18005775583

EU Representative Contact Information:

  • Representative: MJCM SARL
  • Address: CN-78 avenue des Champs Elysees Bureau 326
  • Telephone: 33-767213611
  • E-mail: mjcm190928@gmail.com

For additional guides and documents, including a PDF version of the user manual, please refer to the official product page or download directly from: User Manual (PDF).

Safety Information

Packaging Warning:

WARNING: TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAY PENS. THIS BAG IS NOT A TOY.

General Safety Precautions:

  • Always wear appropriate personal protective equipment (PPE) such as safety glasses and gloves when working on your vehicle.
  • Ensure the vehicle is stable and properly supported before working underneath it.
  • Disconnect the vehicle's battery before performing any electrical work.
  • Do not attempt repairs beyond your skill level. Consult a qualified professional.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.