MAONO T1 mini

Contents

MAONO T1 mini Wireless Lavalier Microphone User Manual

Model: T1 mini

1. Introduction

The MAONO T1 mini is a compact and versatile wireless lavalier microphone system designed for high-quality audio recording with smartphones, tablets, computers, and cameras. It features AI noise cancellation, smart app control, automatic limiting, and various sound effects to enhance your audio experience.

Key Features:

  • High-Quality Audio (48kHz/16bit, 85dB SNR)
  • 4-Level AI Noise Cancellation
  • Smart Automatic Limiting
  • 32dB Gain Adjustment (16 levels via app)
  • 360° Omnidirectional Pickup
  • Extended Battery Life (6h TX, 30h with case)
  • Smart App Control (Maono Link App)
  • Remote Shooting Function
  • Plug-Free Playback
  • Charging While Working
  • 4 Voice Presets & 4 Voice Changer Effects
  • Compact and Lightweight (5.9g per transmitter)
  • MFI Certified for iOS devices

2. Package Contents

Please check the box for the following items:

MAONO T1 mini package contents

Image: Contents of the MAONO T1 mini box, showing two transmitters, one receiver, a charging case, a USB-C to USB-A charging cable, and a user manual.

  • Transmitter (TX) x2
  • Receiver (Type-C, Lightning, or 3.5mm TRS, depending on model) x1
  • Charging Case x1
  • USB-C to USB-A Charging Cable x1
  • User Manual x1

3. Setup Guide

3.1. Connecting the Receiver

The MAONO T1 mini comes with different receiver types to suit your device:

3.1.1. TX Type-C Receiver

Connect this receiver directly to devices with a Type-C port, such as Android phones, tablets, computers, or sports cameras.

Type-C Receiver connection diagram

Image: Diagram showing a Type-C receiver connecting to a laptop, tablet, and smartphone.

3.1.2. RX Lightning Receiver

Connect this receiver directly to Apple devices with a Lightning port, including iPhone 7/8/XS/11/12/13/14 series and iPads.

Lightning Receiver connection diagram

Image: Diagram showing a Lightning receiver connecting to an iPhone.

3.1.3. RX 3.5mm TRS Receiver

For devices requiring a 3.5mm TRS connection, such as cameras or mixers, use the 3.5mm TRS receiver. This receiver also features a volume switch, a USB Type-C charging port, and a 3.5mm audio output connector.

3.5mm TRS Receiver connection diagram

Image: Diagram showing a 3.5mm TRS receiver connecting to a DSLR camera, with callouts for its power button, volume switch, USB-C charging port, and 3.5mm audio output.

3.2. Charging the Device

Before first use, fully charge the transmitters and the charging case.

3.2.1. Charging Transmitters (TX)

Place the transmitters into the charging case. They will begin charging automatically.

3.2.2. Charging the Charging Case

Connect the charging case to a power source using the provided USB-C to USB-A charging cable. A standard 5V USB-C mobile phone charger is recommended.

Charging Indicators:

  • While Charging: The indicator light flashes white slowly.
  • Fully Charged: The white light stays on.
  • Low Power: If the case is not charging, the indicator light flashes white for 4 seconds and then turns off after removing a TX, indicating low power.
Charging Case Indicator Status
LED1LED2LED3LED4Charging Status (while charging, LED on in turn)
●●●●76~99%
●●●○51~75%
●●○○26~50%
●○○○<25%
LED1LED2LED3LED4Power Indicator (non-charging status)
●●●●76~100%
●●●○51~75%
●●○○26~50%
●○○○10~25%
○○○○<10%

3.3. Pairing the Transmitters and Receiver

The transmitters and receiver are pre-paired at the factory. They should connect automatically upon powering on (blue lights on TX and RX will be solid).

If the blue light blinks or the connection is not successful, follow these steps:

3.3.1. For Cell Phone Version

  1. On the Receiver: Long press the receiver's noise reduction/pairing button for 6 seconds. Release when the blue light starts to flash.
  2. On the Transmitter: While the transmitter is OFF, press and hold its power button for 6 seconds until the blue light starts blinking.

Once paired, both the transmitter and receiver indicator lights will stay solid blue.

3.3.2. For Camera Version

  1. On the Receiver: With the receiver OFF, long press its power button for 6 seconds until the blue light flashes rapidly.
  2. On the Transmitter: While the transmitter is OFF, press and hold its power button for 6 seconds until the blue light blinks.

Once paired, both the transmitter and receiver indicator lights will stay solid blue.

For full control and advanced features, download the Maono Link App:

  • Scan the QR code provided in the manual or on the product packaging.
  • Search for "Maono Link" in the App Store (iOS) or Google Play Store (Android).

The app allows you to adjust microphone gain, noise reduction levels, vocal beautification, phone speaker output, AI voice changer, and more.

Note: For camera versions, you may need a USB Type-C to USB Type-C or USB Type-C to Lightning cable to connect your mobile phone to the receiver for app control.

4. Operating Instructions

4.1. Power On/Off

Long press the power button on the transmitter (TX) or receiver (RX) for 2 seconds to turn it on or off.

4.2. AI Noise Cancellation

The MAONO T1 mini features 4 levels of AI noise cancellation. Click the transmitter's power button (after successful pairing) to cycle through the levels. The green light flashes indicate the current level:

4-Level AI Noise Cancellation

Image: Visual representation of the 4 levels of AI Noise Cancellation: Slight (-12dB for Quiet Indoor), Moderate (-18dB for Open Indoor), Strong (-23dB for Noisy Environment), Super (-29dB for Extremely Noisy Environment).

  • 1 Flash (Slight -12dB): For quiet indoor spaces (e.g., meeting rooms, bedrooms).
  • 2 Flashes (Moderate -18dB): For open areas with mild distractions (e.g., beside a road, office).
  • 3 Flashes (Strong -23dB): For noisy settings (e.g., busy streets, malls, parks).
  • 4 Flashes (Super -29dB): For extremely noisy environments (e.g., beach, strong wind).

4.3. Gain Adjustment

Adjust the microphone gain to suit your environment. The T1 mini offers a 32dB gain adjustment range with 16 levels, controllable via the Maono Link App.

High-Quality Audio and Gain Adjustment

Image: Illustrates high-quality audio features including 85dB Signal-to-Noise Ratio, 32dB Gain Adjustment, and 48kHz/16bit Sampling Rate and Depth.

4.4. Smart Automatic Limiting

The T1 mini automatically lowers the volume if the audio input is too high, preventing clipping and distortion for reliable audio quality.

Smart Automatic Limiting feature

Image: Depicts the Smart Automatic Limiting feature, showing how the microphone automatically adjusts volume to prevent audio clipping.

4.5. AI Voice Changer & Sound Presets

Enhance your voice with various effects:

Sound Colorations and Voice Changers

Image: Shows 4 Sound Colorations (Sound Enhancer, Brightness, Warmth, Huskiness) and 4 Voice Changers (Lolita, Uncle, Origin, Goddess).

  • 4 Sound Colorations: Sound Enhancer, Brightness, Warmth, Huskiness.
  • 4 Voice Changers: Lolita, Uncle, Origin, Goddess.

These can be accessed and controlled via the Maono Link App. If you are unsure about the current voice change mode, re-plugging the receiver will restore the original sound.

4.6. Remote Shooting

Quickly double-tap the transmitter to take photos or record videos remotely, simplifying your workflow.

4.7. Plug-Free Playback

The receiver supports plug-free playback, allowing you to listen to your audio without frequently plugging and unplugging the receiver, improving convenience and interface durability.

4.8. Charging While Working

The receiver features a built-in USB-C port, allowing you to charge your phone while recording, ensuring uninterrupted sessions.

5. Maintenance and Safety

5.1. Cleaning

To clean the product, use a clean, soft cloth gently dampened with clean water. Do not use acidic/alkaline or corrosive detergents, as they can cause irreversible damage.

5.2. Storage

Store the device in a dry place, away from extreme temperatures, direct sunlight, and strong magnetic fields. When not in use for extended periods, ensure the device is fully charged and then stored.

5.3. Important Safety Precautions

  • Read the user manual carefully before use.
  • Use only a standard 5V USB-C charger. Do not use chargers exceeding 5V.
  • Avoid dropping or hitting the microphone.
  • Do not use in water or humid environments.
  • Do not expose to liquid splashing or dripping.
  • Keep away from heat sources, high temperatures, and direct sunlight.
  • Avoid using during thunderstorms; unplug the USB charger.
  • Unplug the USB charger when not in use for a long time.
  • Do not place near strong magnetic or interference equipment (e.g., Wi-Fi routers).
  • If any abnormality (heating, odor) occurs, unplug the charger immediately.
  • Do not disassemble or repair the device without authorization.

6. Troubleshooting

  • Device Not Pairing: If the blue indicator light blinks, refer to the pairing instructions in Section 3.3. Ensure both transmitter and receiver are powered off before initiating pairing.
  • No Sound/Poor Audio Quality:
    • Check if the receiver is correctly plugged into your recording device.
    • Ensure the transmitter is properly clipped and close to the sound source.
    • Adjust the gain level via the Maono Link App.
    • Check noise reduction settings; too high a level in a quiet environment might affect sound naturalness.
    • Ensure the recording app on your phone/device is correctly configured to use the external microphone.
  • Battery Not Charging:
    • Verify the USB-C cable is securely connected to both the charging case and the power adapter.
    • Ensure the power adapter is functional and provides 5V output.
    • Check the charging indicator lights on the case (refer to Section 3.2.2).
  • AI Voice Changer Not Working/Unexpected Sound: Re-plug the receiver to reset the voice changer to its original sound. Ensure the Maono Link App is updated and settings are correctly applied.
  • Interference/Unwanted Noise: Move away from strong magnetic fields, Wi-Fi routers, or other electronic devices that might cause interference.

7. Specifications

FeatureSpecification
ModelT1 mini
TransducerCondenser Microphone
Polar PatternOmnidirectional (6mm mic core)
CommunicationWireless
Weight (Transmitter)5.9g
Signal-to-Noise Ratio (SNR)85dB
Gain Adjustment32dB (16 levels)
Sampling Rate/Depth48kHz/16bit
Frequency Response20Hz - 20kHz
TX Usage Time6 Hours
Total Battery Life (with case)30 Hours
Transmission Range328ft (approx. 100m)
Noise Cancellation Levels4 Levels (AI Noise Cancellation)
Built-in BatteryYes
CertificationCE, FCC, RoHS

8. User Tips

  • Check Packaging: Upon receiving your product, inspect the packaging for any signs of tampering. While the product itself is new, the outer box might not always be factory-sealed.
  • Optimal Placement: For the best audio quality, clip the transmitter approximately 6-8 inches (15-20 cm) from your mouth.
  • App Control: Utilize the Maono Link App for fine-tuning settings like gain, noise reduction, and voice effects to match your specific recording environment and desired output.
  • Compatibility: Note that the multi-scenario use image indicates the product is not compatible with iPhone 14 series and below for certain features. Always check your device's compatibility.
  • Charging Habits: For extended battery life, avoid fully draining the battery regularly. Charge the case and transmitters when convenient.

9. Warranty and Support

MAONO products are designed and manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official MAONO website or contact your local distributor.

Unauthorized disassembly or repair of the device will void the warranty and may cause damage or fire. Always refer to qualified personnel for service.

© 2024 MAONO. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.