diymore VHM-314

Contents

VHM-314 MP3 BT Audio Receiving and Decoding Board User Manual

Model: VHM-314

Brand: diymore

1. Product Overview

The VHM-314 MP3 BT Audio Receiving and Decoding Board is a compact, ready-to-use module designed for DIY audio projects. It features Bluetooth 5.0 for lossless audio decoding, making it suitable for embedding into various audio systems like car audio or custom speaker setups.

VHM-314 MP3 BT Decoder Board showing features: Ready to use, Ultra small size, DIY Embedded, Lossless decoding.

Figure 1: VHM-314 MP3 BT Decoder Board with key features.

2. Setup and Connections

This section details how to connect the VHM-314 module to your audio system and power supply.

2.1 Pinout and Components

Refer to the diagram below for the layout of components and connection points on the VHM-314 module.

Function Display diagram of VHM-314 module showing BT Antenna, 3.7-5V power input, Type-C power port, BT Decoder chip, LED indicator, Right channel, Land, Left Channel, and 3.5MM dual channel Headphone jack.

Figure 2: VHM-314 Module Function Display and Pinout.

  • BT Antenna: Integrated on the PCB for Bluetooth signal reception.
  • 3.7-5V: DC power input terminals.
  • Type-C power port: Universal Type-C 5V power supply input.
  • Right channel (R): Audio output for the right channel.
  • Land (GND): Common ground for audio and power.
  • Left Channel (L): Audio output for the left channel.
  • 3.5MM dual channel Headphone jack: Direct audio output for headphones or line-in to an amplifier.
  • BT Decoder chip: Main processing unit (AS328705109-55F4).
  • LED indicator: Provides status feedback (e.g., power, Bluetooth pairing).

2.2 Power Supply

The module can be powered via two methods:

  • Type-C USB Port: Connect a standard 5V USB power source using a Type-C cable.
  • DC Input Terminals: Supply DC 3.7V to 5V directly to the "3.7-5V" pads, ensuring correct polarity (+ and -).

Caution: Ensure the power supply voltage does not exceed 5V to prevent damage to the module. Observe correct polarity when using DC input terminals.

2.3 Audio Output

Audio can be outputted in two ways:

  • 3.5mm Headphone Jack: Connect headphones directly or use a 3.5mm audio cable to connect to an amplifier's input.
  • Solder Pads (L, G, R): Solder wires to the Left (L), Ground (GND), and Right (R) pads to connect to an external amplifier or other audio equipment.

3. Operating Instructions

Once powered, the VHM-314 module is ready for use.

3.1 Bluetooth Pairing

  1. Power on the VHM-314 module using either the Type-C port or DC input.
  2. The LED indicator will typically blink, indicating it is in pairing mode.
  3. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices.
  4. Select "BT Audio" or a similar name (may vary) from the list of devices.
  5. Once connected, the LED indicator may change to a solid light or blink at a slower rate.
  6. You can now play audio from your device, and it will be decoded and outputted by the VHM-314 module.

3.2 Audio Playback

The module supports lossless audio decoding. Ensure your audio source provides high-quality audio for the best experience.

4. Maintenance

To ensure the longevity and optimal performance of your VHM-314 module, follow these simple maintenance guidelines:

  • Keep Dry: Avoid exposing the module to moisture or liquids, as this can cause short circuits and damage.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Handle with Care: This is an electronic component. Avoid dropping it or subjecting it to strong impacts.
  • Prevent Static Discharge: When handling the module, especially during installation, take precautions against electrostatic discharge (ESD) to protect sensitive components.

5. Troubleshooting

If you encounter issues with your VHM-314 module, try the following troubleshooting steps:

5.1 No Power/LED Off

  • Check if the power supply is connected correctly and providing the specified voltage (3.7V-5V).
  • Ensure the Type-C cable is fully inserted and functional if using the USB port.
  • Verify polarity if using the DC input terminals.

5.2 No Audio Output

  • Confirm that the module is successfully paired with your Bluetooth device (check LED indicator).
  • Ensure the volume on your Bluetooth device is turned up.
  • Check all audio connections (3.5mm jack, L/G/R pads) to your amplifier or headphones.
  • Test with different audio cables and output devices.

5.3 Poor Audio Quality/Interference

  • Ensure the power supply is stable and free from noise.
  • Keep the module away from strong electromagnetic interference sources.
  • Check the quality of your audio source and cables.
  • Ensure the Bluetooth connection is stable and within the service range (> 5 meters).

6. Specifications

FeatureSpecification
Product NameMP3 Bluetooth Decoder Board
USB Power SupplyUniversal Type-C 5V
DC Power SupplyDC 3.7V ~ 5V
Signal-to-Noise Ratio (SNR)90dB
Total Harmonic Distortion + Noise (THD+N)-70dB
Crosstalk-86dB
Dynamic Range (DNR)91dB
Bluetooth Support ConfigurationA2DP/AVCTP/AVDTP/HFP
Bluetooth Service Range> 5 meters
Dimensions (L x W)3cm x 3cm (1.2in x 1.2in)
Weight3.8g
Image showing the dimensions of the VHM-314 module as 3cm by 3cm (1.2 inches by 1.2 inches) and its weight as 3.8g.

Figure 3: VHM-314 Module Dimensions and Weight.

7. User Tips

No specific user tips were available from customer reviews or Q&A for this product.

8. Warranty and Support

For any issues, technical support, or warranty inquiries, please contact the seller directly through the platform where the product was purchased. Keep your purchase records handy for faster assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.