bonacell RH-5188 Wireless Controller User Manual

1. Product Overview

Thank you for choosing the bonacell RH-5188 Wireless Controller. This manual provides detailed instructions for setup, operation, and maintenance to ensure you get the best gaming experience.

Gamepad Layout

Figure 1: Gamepad Concept Diagram

• R1/R2 & L1/L2: Shoulder and Trigger buttons
• Touchpad: Interactive surface
• SHARE: Share button
• Cross Key: Directional pad
• L3/Left Stick: Left analog stick (press for L3)
• OPTIONS: Options button
• X, O, □, Δ: Action buttons
• R3/Right Stick: Right analog stick (press for R3)
• TURBO: Turbo function button
• LIGHT: RGB lighting control button
• 3.5mm headphone jack: Audio output
• Home: PS button / Home button

2. Setup Instructions

2.1 PS5 Console Connection Method

Note: The first time a new controller connects to PS5, a wired connection is required.

1. When the controller is turned off, connect it to your PS5 console via a USB cable.
2. Press the "Home" (PS) button on the controller to connect to the PS5.
3. Once the wired connection is successful, you can disconnect the USB cable.
4. Press the "Home" (PS) button again to connect to the PS5 wirelessly.

Figure 2: PS5 Wired Connection

2.2 PC Wired Connection

1. Ensure your PC is powered on.
2. Connect the controller to your computer via a USB-C cable. The controller will be recognized automatically.

Figure 3: PC Wired Connection

2.3 Bluetooth Connection - PC

1. Turn on Bluetooth on your PC.
2. On the controller, first press and hold the "SHARE" key, then press the "Home" (PS) key combination. Press and hold for 3 seconds until the indicator light flashes, indicating the controller has entered pairing state. Release the buttons.
3. On your PC, search for Bluetooth devices and select "DualSenes Wireless Controller" to connect.

Figure 4: PC Bluetooth Connection

3. Operating Instructions

3.1 MACRO Programming Function

This function allows you to record a sequence of button presses to be executed with a single press of a back paddle (PL/PR).

1. Press the "SET" key for 3 seconds. The P indicator light will flash slowly, and the motor will vibrate, indicating entry into programming mode.
2. Press any function key (e.g., Cross Key directions, X, O, □, Δ, L1, L2, L3, R1, R2, R3) in the desired sequence. The controller records both key presses and release times. A maximum of 24 key values can be recorded.
3. After recording your sequence, press either the "PL" or "PR" key. The motor will vibrate, and the P indicator will stay on, confirming successful programming.

Figure 5: MACRO Programming

3.2 Clear Macro Programming Function

1. Press and hold the "SET" button for 5 seconds. The indicator light will flash slowly, and the motor will vibrate.
2. Press the "PL" or "PR" button. The indicator light will stay on, the macro setting will be canceled, and the motor will vibrate.

Figure 6: Clear MACRO Programming

3.3 Turbo Function

The Turbo function allows for rapid, repeated input of a button press.

1. To activate Turbo: Long press the "TURBO" button, then long press any function key (X, O, □, Δ, L1, L2, R1, R2) you wish to apply Turbo to.
2. To deactivate Turbo for a specific button: Repeat the same process (long press "TURBO" then long press the function key).

Figure 7: Turbo Function Activation

3.4 RGB Lights

1. Press the "LIGHT" button to cycle through different lighting colors and modes. Available modes include: colorful transformation, single color, color cyclic transformation, solid red, solid blue, solid green, solid pink, solid orange, solid cyan, and solid purple.
2. Long press the "LIGHT" button for 3 seconds to turn the RGB lighting (including button lights) on or off.

Figure 8: RGB Lighting Control

3.5 Trigger and 3D Joystick Calibration

If you experience issues with trigger or joystick accuracy, perform calibration:

1. Hold the "SHARE" and "OPTIONS" buttons simultaneously.
2. While holding these buttons, connect the controller to a power source (e.g., PC or PS5) via USB cable. The Home button will flash quickly.
3. Press the L2 and R2 triggers 2-3 times each.
4. Rotate both 3D joysticks 2-3 full circles each.
5. Long press the "X" button for 1 second to confirm. The Home key will stay on, indicating calibration is complete.
6. Power off the controller to save the calibration settings.

Figure 9: Trigger and Joystick Calibration

4. Maintenance and Precautions

• Do not store this product in humid or high-temperature environments.
• Avoid knocking, beating, sticking, piercing, or attempting to disassemble the product to prevent unnecessary damage.
• Keep water or other liquids away from the Gamepad, as they may affect its function.
• Do not charge the Gamepad near fire or other heat sources.
• Do not place heavy objects on this product.
• Do not touch the port with your hands or insert foreign objects into the port.
• Non-professionals should not disassemble this product; otherwise, it will void the after-sale warranty.
• Children should use this product under adult supervision.

5. Troubleshooting

5.1 Controller Not Recognized on Smart Android TV

• Confirm that the smart Android TV USB interface is working properly.
• Check if the power supply of the smart Android TV is insufficient, leading to unstable USB voltage.
• Try unplugging the controller from the current smart Android TV USB port and trying another USB port.

5.2 Controller Cannot Be Used in Game

• Verify if the game itself supports controller peripherals.
• You may need to configure the Gamepad settings within the game before use.

5.3 Gamepad Not Vibrating

• Check if the game itself supports vibration feedback.
• Ensure the vibration function is enabled in the game settings.

6. Specifications

7. User Tips

• Button Feel: Some users note the buttons can feel a bit firm initially; they may soften with use.
• Microphone via Bluetooth: The built-in microphone function may not work when connected via Bluetooth. Consider a wired connection or external headset if microphone use is critical.
• Enhanced Grip: For improved comfort and grip, some users add rubber grips to the analog sticks.
• Advanced Features: The Turbo and Macro functions can provide a competitive edge. Use them responsibly and according to game rules.
• Triggers: Pay attention to the feel and response of the triggers, as some users have noted them as a point of interest.

8. Warranty and Support

For technical support, warranty services, or further inquiries, please contact the manufacturer:

• Manufacturer: Huizhou Rong Hui Technology Co.,Ltd
• Address: Dazhou No.1 Industrial Zone, Liboshui Village, Shiwan Town, Boluo County
• Email: euservice168@outlook.com

Please refer to the full user manual PDF for additional details: Download PDF Manual