SHINEKNOT NEW-KL6 Outdoor Work Headlight User Manual

1. Introduction

The SHINEKNOT NEW-KL6 Outdoor Work Headlight is designed for durability and high performance in challenging environments. Crafted from robust ABS plastic, it is engineered to withstand freezing temperatures, drops, and is IP68 rated for underwater use. With an impressive 1000 lumens output and a long-lasting rechargeable battery system, it provides reliable illumination for mining, construction, outdoor activities, and emergency situations.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your NEW-KL6 headlight.

2. Safety Warnings

• Do not shine the lamp directly into eyes, as the strong light can cause harm.
• Do not disassemble the cap lamp; this may cause operational problems and void the warranty.
• Avoid crashing or striking the lamp.
• Do not charge the lamp underground.
• Keep the lamp away from fire sources.
• Ensure proper maintenance of the lamp, especially if used underground.
• Do not attempt self-disassembly or repair; otherwise, the manufacturer will not be responsible for the warranty.
• Properly recycle discarded cap lamps; do not throw them away without proper disposal.

3. Product Overview

3.1. Parts of NEW-KL6

Figure 1: Parts, Accessories, and Dimensions Diagram

• Top cover
• Auxiliary light
• Reflector
• Main light
• Bottom cover
• OLED display
• Control switch
• Stationary screw
• Charging contact point
• Stainless steel cap lamp clip

3.2. Standard Accessories

• Lamp (Headlight unit)
• Power adaptor
• Magnetic USB charger wire
• Vehicle power adaptor

For a visual representation of the accessories, please refer to Figure 1.

3.3. Dimensions

• Main view: 85 mm
• Top view: 72 mm
• Left view: 58 mm
• Right view: 29 mm

For a visual representation of the dimensions, please refer to Figure 1.

4. Setup

4.1. Installing the Cap Lamp Clip

1. Place the rotatable cap lamp onto the positioning slot on your helmet or desired surface.
2. Securely fix the clip using the provided hex-screwdriver.

Figure 2: Cap Lamp Clip Installation and Usage

5. Operation

5.1. Light Operating Instructions

• Normal Service Operation:
  1. Short press the L button once: Main light turns on.
  2. Short press the L button a second time: Secondary light turns on.
  3. Short press the L button a third time: Both main and secondary lights turn off.
• SOS Function:
  • Long press the L button for 3 seconds: The light will flash regularly (0.1 seconds on, 0.1 seconds off) to emit an SOS distress signal.

5.2. Lighting Angle Adjustment & Usage

The NEW-KL6 headlight can be held with its clip for convenient usage. It can also be worn on a cap or helmet using the clip, or even mounted on a wall with a nail.

Refer to Figure 2 for visual guidance on usage.

5.3. Time Modulation Instructions

• Clock Modulation:
  1. Long press the T button for more than 2 seconds to enter clock setting mode.
  2. Short press the T button once to automatically add one to the corresponding numerical value.
  3. Long press the T button for 2 seconds or more to exit clock setting mode.
• Automatic Arc Screen Time Modulation:
  1. Long press the T button for more than 2 seconds to enter clock setting mode.
  2. Short press the T button eight times to enter automatic arc screen time setting.
  3. Short press the T button once to automatically add one to the corresponding numerical value.
  4. Short press the T button once to set the initial value.
  5. Long press the T button for 2 seconds or more to exit clock setting mode.
• Press the T/L buttons simultaneously to automatically extinguish the screen.

6. Charging

6.1. USB Charging Method

1. Connect the magnetic USB charger wire to the charging contact point on the headlight.
2. Connect the other end of the USB charger wire to a 5V, 2A power supply (e.g., power adaptor, vehicle power adaptor, or compatible USB mobile phone charger).
3. The charging indicator will turn red during charging and green when fully charged.
4. The OLED display will light up during charging and automatically extinguish after 3 minutes. When fully charged, the OLED display will show a constant light for 3 minutes before extinguishing.

The NEW-KL6 is half-charged before delivery. Please fully charge it before first use for optimal performance.

Always use the original matched charger/charging rack or magnetic USB wire to charge the lamp to prevent damage.

7. Maintenance

• For long storage periods, repeat the following maintenance steps every two months: fully charge the battery, then discharge it completely, and then charge it for 2 hours.
• Regularly clean the charging point slot to ensure proper contact for charging with the USB wire.

8. Troubleshooting

9. Specifications

Note: Some specifications like 'Rated capacity', 'Continuous working time', 'Main light LED Working Voltage', 'Main light LED Working Current', 'Main light Luminous flux', 'Lamp lighting degree', 'Main light life span', 'Auxiliary light Power', 'Auxiliary light life span', 'Shot circuit protect time', 'Life span of the battery (recharges)', 'Charging time with NWB-30', and 'Charging time with USB' are listed in the manual's table but without specific values in the provided content.

10. User Tips

• Maximize Battery Life: To ensure you get the longest possible operating time, always fully charge your NEW-KL6 headlight before use, especially for extended work or outdoor activities.
• Regular Charging for Storage: If storing the headlight for a long period, follow the maintenance steps to fully charge, discharge, and then charge for 2 hours every two months. This helps preserve battery health.
• Keep Charging Contacts Clean: Regularly inspect and clean the charging contact points and slot to prevent poor connections and ensure efficient charging.

11. Product Features Showcase

Key Features:

• 100,000 Hours Lifespan & Super Stable Brightness: Utilizes CREE LED technology for extended durability and powerful illumination up to 16000LUX.
• OLED Display: Provides real-time information on time and remaining battery power with a wide visual angle and excellent temperature tolerance (-40 to +85 degrees Celsius).
• Safety, Reliability & Free Maintenance: Equipped with two 18650 Lithium batteries and a comprehensive protection circuit against overcharge, overcurrent, short circuit, over-discharge, and overheating. Designed to be explosion-proof.
• Explosion-proof & Strong Impact Resistance: High-strength PC construction and IP68 rating ensure resilience against drops and harsh conditions.
• Super Waterproof: IP68 certified for reliable operation even when submerged in water.
• Low Battery Power Alarm: Features an auxiliary light flash and main lamp regular flash to indicate low battery, automatically switching to main lights as needed.
• SOS Function: Includes a distress signal light for emergencies.
• Convenient USB Charging: Supports magnetic USB charging and is compatible with standard 5V, 2A USB power adapters.
• Super-Light in Weight: Weighing only 140g-190g, it offers comfortable wear for extended periods.
• Environmentally Friendly: Designed with sustainability in mind, using rechargeable batteries to reduce waste.

12. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. The manufacturer is not responsible for issues arising from self-disassembly or unauthorized repairs.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF).