HFC18500 HFC18500

Contents

User Manual

HFC18500 1000mAh 3.2V Lithium Capacitor Battery

Model: HFC18500

1. Product Overview

This manual provides essential information for the safe and effective use of your HFC18500 Lithium Capacitor Battery. Please read this manual thoroughly before installation and operation.

Three HFC18500 Lithium Capacitor 3.2V batteries
Figure 1: HFC18500 Lithium Capacitor Batteries

2. Safety Information and Warnings

WARNING: Improper use may cause the battery to catch fire, explode, or burn. Failure to follow these safety instructions can result in fire, electric shock, injury, or damage to the product or property.

  • Do not squeeze, puncture, disassemble, or short-circuit the battery.
  • This product is intended to be used in dry areas only.
  • Keep out of reach of children.
  • Do not expose to extreme temperatures (above 60°C or below -20°C) or direct sunlight.
  • Do not immerse in water or other liquids.
  • Dispose of batteries according to local regulations. Do not dispose of in household waste.

3. Setup and Installation

3.1 Initial Preparation

  1. Before first use, please ensure the battery is fully charged to activate its activity.
  2. Inspect the battery for any signs of damage before installation. Do not use if damaged.

3.2 Battery Installation

Connect the positive pole of the battery to the positive terminal of your device, and the negative pole to the negative terminal. Alternatively, plug it into the corresponding interface of your power tool or device.

  • Ensure correct polarity (+ to + and - to -) to prevent damage to the battery and device.
  • For complex installations or if you are unsure, it is highly recommended to have the battery installed by qualified professionals.

4. Operating Instructions

To ensure optimal performance and longevity of your battery:

  • When using the battery, avoid completely running out of power. It is recommended to charge the battery in a timely manner to extend its overall life.
  • Always use the battery within its specified temperature range (-20℃ to 60℃).

5. Charging and Maintenance

5.1 Charging

  • During the charging process, it is normal for the battery surface to generate slight heat.
  • Ensure good ventilation in the charging area to dissipate any heat.
  • Use a compatible charger designed for 3.2V Lithium Capacitor batteries.

5.2 Maintenance

  • If the battery is idle for three months or more, it needs to be recharged. Keeping the battery fully charged is the best maintenance method for long-term storage.
  • Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
  • Keep battery terminals clean and free from corrosion.

6. Troubleshooting

If you experience issues with your battery, consider the following:

  • Battery not charging: Ensure the charger is properly connected and functional. Check for any damage to the battery or charger.
  • Battery not powering device: Verify correct installation and polarity. Ensure the battery is sufficiently charged. Check the device for any faults.
  • Overheating during use/charge: Slight warmth is normal. Excessive heat indicates a potential issue. Discontinue use immediately and allow the battery to cool. Ensure proper ventilation during charging.

For persistent issues or concerns, please contact the seller for further assistance.

7. Specifications

FeatureSpecification
Product NameBattery
ModelHFC18500
Nominal Voltage3.2V
Nominal Capacity1000mAh
Discharge Current10000mAh (Max)
Charging Current3000mAh (Max)
Dimensions (Diameter x Height)18.6mm x 50.8mm
Weight28.5g
Cycling Life300-500 times
Operating Temperature-20℃ to 60℃
CertificationCE
OriginMainland China
Compliance documents including MSDS, CE Certificate, ISO Certificate, and Transport Report
Figure 2: Product Compliance Documentation

8. User Tips

No specific user tips were available from reviews or Q&A for this product. Always follow the instructions in this manual for best results.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller directly through your purchase platform. Please have your order details ready when contacting support.

An electronic version of this manual may be available as a PDF document: View User Manual PDF

10. Manufacturer Information

EU Representative:
E-CrossStu GmbH
69 Mainzer Landstrasse,
Frankfurt am Main, Hessen 60329
Email: E-crossstu@web.de
Tel: +496933296764

Made in China

Compliance Marks: CE, UKCA, FC, RoHS

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.