1. Introduction
This manual provides detailed instructions for the installation and operation of your new ambient lighting system designed for Mercedes-Benz A/CLA W176/CLA W117/GLA W156 models. This system enhances your vehicle's interior with customizable lighting, creating a modern and immersive driving experience.
2. Safety Information
- Professional installation is highly recommended to ensure proper function and avoid damage to your vehicle's electrical system.
- Always disconnect the vehicle's battery before beginning any electrical installation.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Do not expose the components to excessive moisture or extreme temperatures.
- Keep wiring away from moving parts or heat sources within the vehicle.
- If you are unsure about any step, consult a qualified automotive technician.
3. Package Contents
Please verify that all items listed below are included in your package:

- 5x Turbine Air Vents (with integrated lighting)
- 4x Door Frame Light Bars
- Main Control Module
- Various Wiring Harnesses (for door connections, central control, power)
- APP Control Module
- Central Control LED Light Strip
- Central Control Reflective Paper

4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KALADA |
| Voltage | 12 V |
| Item Type | Atmosphere lamp |
| Origin | Mainland China |
| Certification | CE |
| High-concerned Chemical | None |
5. Setup and Installation
This tutorial is suitable for the old A/B/CLA/GLA 12 color ambient light, compatible with NTG 4.5 and NTG 5.0 hosts, and supports monochrome and 12-color cycles.
5.1. Door Installation
- Remove Door Plating Parts: Carefully remove the door plating parts and then remove the T30 screws.
- Pry Up Side Lock: Gently pry up the side lock mechanism.
- Remove Door Plating Frame: Detach the original door plating frame.
- Install New Door Frame: Replace the original door frame with the new door frame atmosphere light that includes the light bar. Pay close attention to ensure the buckle is securely in place.
- Connect Ambient Light Module: Adapt the ambient light module to the left front door plug.
- Connect Door Atmosphere Light: Connect and plug in the door atmosphere light.
- Thread Rear Door Lamp: Thread the B-pillar for the rear door atmosphere lamp. Ensure you insert the same wire color in the correct place.
- Wiring Connections:
- Connect the left front door frame light to the main line on the right footlights.
- Connect the left rear door frame light to the left main line.
- Connect the right front door frame light to the right main line.
5.2. Central Control Installation
- Remove Air Outlets: Use a hook tool to carefully pull out all the central air outlets. Identify the pull hook positions for safe removal.
- Remove Screen: Remove the screen screws and then carefully remove the vehicle's display screen.
- Access Control Panel: Note that the control panel has both screws and snaps. Pay attention to the position of the left side air vent snap button of the central control.
- Remove Right Side Screw: Remove the screw located on the right side of the central control unit.
- Pry Up Central Control Panel: Slowly and carefully pry up the center control panel, starting from right to left.
- Install LED Strip: Install the central control LED light strip first. Ensure the lamp head is facing up and the lamp beads are oriented upwards.
- Install Reflective Paper: Install the central control reflective paper. Refer to the installation details for proper placement.




6. Operating Instructions
The ambient lighting system can be controlled through your vehicle's infotainment system or via a dedicated mobile application (if applicable).
6.1. Vehicle System Control
- Access Settings: Navigate through your vehicle's infotainment system to:
Setting>Lighting>Ambient Light. - Select Color Modes:
- Single Color Breathing: To activate, use the steering wheel buttons in the sequence:
Up>Down>Up. This mode cycles through cool, medium, and cool colors. - 12-Color Cycle: To activate, use the steering wheel buttons in the sequence:
Down>Up>Down. This mode cycles through warm, medium, and warm colors.
- Single Color Breathing: To activate, use the steering wheel buttons in the sequence:

6.2. APP Control
If your system includes APP control, download the specified application from your smartphone's app store. Follow the in-app instructions to connect to your ambient lighting system for additional customization options.
Video: Product overview and demonstration of ambient lighting features, including installation steps and color changes.
7. Maintenance
- Keep the light components clean by wiping them gently with a soft, dry cloth.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the surfaces.
- Periodically check all wiring connections to ensure they remain secure.
- If any component appears damaged, contact support for assistance.
8. Troubleshooting
- Lights Not Turning On:
- Check all power connections and ensure they are securely plugged in.
- Verify that the vehicle's ambient light settings are enabled in the infotainment system.
- Ensure the vehicle's battery is properly connected and charged.
- Lights Flickering or Inconsistent Colors:
- Inspect all wiring for loose connections or damage.
- Ensure the vehicle's electrical system is providing stable power.
- If using APP control, try restarting the app or reconnecting.
- Incorrect Color Display:
- Verify the color settings in your vehicle's infotainment system or the mobile application.
- Ensure the correct color mode (single or 12-color cycle) is selected.
- System Not Responding:
- Try turning the vehicle off and on again to reset the system.
- Check the main control module connections.
If problems persist after attempting these troubleshooting steps, it is recommended to consult a professional automotive technician.
9. User Tips
- Before purchasing, carefully review the product dimensions and specifications to ensure compatibility and fit with your specific vehicle model and year.
- Confirm your vehicle's infotainment system version (NTG 4.5 or NTG 5.0) to ensure full compatibility with the ambient light system's control features.
- Familiarize yourself with your vehicle's interior panel removal procedures beforehand to minimize potential damage during installation.
- Utilize the mobile application for more granular control over colors, brightness, and lighting effects if your system supports it.
10. Warranty and Support
For any warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
For a detailed visual guide and additional information, please refer to the official user manual PDF available at: Official User Manual (PDF)