WEEME 806 / T9

Contents

WEEME 806 / T9 Professional Hair Clipper and Trimmer Set

User Instruction Manual

WEEME Professional Hair Clipper and Trimmer Set

Image: The WEEME Professional Hair Clipper and Trimmer Set, showcasing both devices and a digital power display.

Introduction

This manual provides detailed instructions for the safe and effective use of your WEEME 806 / T9 Professional Hair Clipper and Trimmer Set. This set is designed for various hair cutting and trimming needs, including hair, beard, mustache, body hair, and sideburns. Please read this manual thoroughly before first use and keep it for future reference.

Parts Overview

Familiarize yourself with the components of your hair clipper and trimmer:

  1. Blade: The cutting component of the device.
  2. On/Off Switch: Controls the power to the device.
  3. Charging Indicator: Displays the charging status and battery level.
  4. Plug: The power input for charging.
  5. Connection Plug: The port for the charging cable.
WEEME Hair Clipper and Trimmer Set with accessories

Image: The complete WEEME hair clipper and trimmer set, including various limit combs, charging cables, and a cleaning brush.

Setup

Initial Charging

  1. Connect the charging cable to the device's connection plug (5) and then to a suitable power adapter.
  2. Ensure the On/Off switch (2) is in the 'Off' position.
  3. The charging indicator light (3) will illuminate, showing the charging status.
  4. Once fully charged, the indicator will show 100% power.

Blade Lubrication

Before first use, and periodically thereafter, apply a small amount of lubricating oil (not included) to the blades to ensure smooth operation and longevity.

Video: A demonstration of the hair clipper and trimmer, showing the charging port, power display, and blade adjustment lever.

Operating Instructions

Turning On/Off

After charging, push the On/Off switch (2) to the 'On' position to start using the device. Push it back to 'Off' to power down.

Adjusting Cutting Length

The hair clipper features a 5-speed regulator knife for various hair lengths. For specific lengths, attach the appropriate limit comb. The set includes 4+4 limit combs for precise control:

  • Trimmer Combs: #1.5mm (0.05inch), #2.0mm (0.07inch), #3.0mm (0.11inch), #4.0mm (0.15inch)
  • Clipper Combs: #1.5mm (0.15inch), #3.0mm (0.11inch), #4.5mm (0.07inch), #6.0mm (0.05inch)
4+4 Limit Comb Combination

Image: Diagram illustrating the different sizes of limit combs included for both the hair clipper and trimmer.

Usage Tips

  • The set is suitable for wet and dry haircuts.
  • Use the clipper for general hair cutting and the trimmer for detailed work like beard and mustache trimming, body hair, eyebrows, and sideburn repair.
  • The digital display on the clipper shows the remaining power percentage.
Pushing Trimmer & Carving Hairstyle Examples

Image: Examples of hairstyles and detailing achievable with the pushing trimmer for carving and precise lines.

Maintenance

Cleaning

  1. Ensure the hair clipper is turned off and the power cord is disconnected before cleaning.
  2. Remove any attached limit comb.
  3. Use the provided cleaning brush to remove hair remnants from the blades.
  4. For a more thorough cleaning, the blade can be removed. Press the mild part of the blade to detach it.
  5. Clean the main body of the product with a slightly damp, soft cloth. Do not use solvents or abrasive materials.

Blade Replacement

Blades will wear over time. It is recommended to replace them when necessary.

  1. Ensure the device is powered off.
  2. Press the mild part of the blade to remove it.
  3. Insert the new blade (part B) into the plastic slot.
  4. Press the middle part of the blade and snap it into the slot (part A) until it is completely seated.
  5. If you find it difficult to complete step 3, press the on/off key to activate the clipper, then repeat the process.

Troubleshooting

  • Device not turning on: Ensure the device is fully charged. Check if the on/off switch is fully engaged.
  • Poor cutting performance: Clean the blades thoroughly. Apply lubricating oil to the blades. Ensure the correct limit comb is attached. If performance does not improve, consider replacing the blades.
  • Charging issues: Verify the charging cable is securely connected to both the device and the power source. Check if the power adapter is functioning correctly.

Specifications

Feature Specification
Brand Name WEEME
Item Type Hair Trimmer
Power Type Mains and battery operation
Blade Material Stainless Steel
Battery Charging Time Up to 2 hours
Battery Life Over 90 minutes
Is Batteries Included Yes
Function Wet haircut, Dry haircut, Fast Charging, Charging indication
Maximum Cutting Length 5 - 10 mm
Minimum Cutting Length Less than 0.5mm
Length Adjustment Method Change of nozzles
Number of Nozzles 5 or more pieces
Purpose For beard and mustache, For body, For eyebrows, For the head
Material Metal + plastic
Motor Vibratory
Commodity Quality Certification CE
Origin Mainland China
Product Dimensions Diagram

Image: Detailed dimensions of both the hair clipper (16.5cm/6.49inch length, 3.6cm/1.42inch width, 3.5cm/1.37inch base width) and the trimmer (14.1cm/5.55inch length, 3.3cm/1.29inch width, 2.5cm/0.98inch base width).

User Tips

  • Always ensure blades are clean and oiled for optimal performance and to prevent pulling.
  • For precise lines and detailing, use the trimmer without a comb.
  • When cutting hair, always start with a longer comb length and gradually reduce it to achieve the desired style.
  • The digital power display is useful for knowing when to recharge, preventing unexpected power loss during use.

Warranty and Support

For detailed information regarding product warranty, please refer to the terms and conditions provided at the time of purchase. If you encounter any issues or require further assistance, please contact the seller or manufacturer's customer support.

A comprehensive user manual in PDF format is available for download. You can access it via this link: WEEME 806 / T9 User Manual (PDF).

Safety Information

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • The appliance must only be supplied at safety extra low voltage corresponding to the marking on it.
  • Do not immerse the device in water.
  • Keep the device away from heat sources and direct sunlight.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.