WEEME 806

Contents

WEEME 806 Men's Hair Clipper Set

Rechargeable Professional Hair Clipper Operation Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your WEEME 806 Men's Hair Clipper Set. Please read all instructions carefully before use and retain this manual for future reference.

The WEEME 806 Hair Clipper Set features a super-dressed system with a titanium alloy fixed blade, a 5-speed regulator for various hair lengths, and a powerful 1500mAh high-speed motor. It is designed for both wet and dry hair cutting, offering versatility for different grooming needs.

WEEME 806 Hair Clipper Set with accessories

Image: WEEME 806 Hair Clipper Set showing both clippers, various guide combs, and charging cables.

Important Safety Information

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • The appliance must only be supplied at safety extra-low voltage corresponding to the marking on it.
  • Do not use solvents or abrasive materials for cleaning.

Parts Identification

Familiarize yourself with the components of your hair clipper set:

  1. Blade
  2. On/off switch
  3. Charging indicator
  4. Plug (for charging cable)
  5. Connection plug (on the clipper)
Detailed view of WEEME hair clipper features

Image: Close-up view highlighting features like the 'R' Angle Blade, Tooth Pitch Adjustment, Digital Display Screen, Safe Blade, and Hook Design.

Setup

Initial Charging

  1. Insert the charging cable plug into the connection slot on the hair clipper.
  2. Ensure the clipper's On/off switch is in the 'off' position.
  3. Connect the USB end of the charging cable to a suitable USB power adapter (not included).
  4. The charging indicator light will illuminate, indicating the charging status.
  5. Allow the clipper to charge for up to 2 hours for a full charge. The battery life is approximately 90 minutes on a full charge.

Video: Demonstrates the unboxing, charging, and basic cleaning of the hair clipper set.

Attaching Guide Combs

Your clipper set includes 5 or more guide combs for different cutting lengths. To attach a comb, align it with the blade and push firmly until it clicks into place. To remove, gently pull the comb away from the blade.

Operation

Turning On/Off

After charging, push the On/off switch to the 'On' position to start using the clipper. Push the switch back to 'Off' to turn it off.

Cutting Hair

The clipper is suitable for wet and dry hair cutting, as well as for beard, mustache, body, eyebrow, and head grooming. Select the appropriate guide comb for your desired hair length. The clipper features a 5-speed regulator for precise control.

WEEME hair clipper in use for various styles

Image: Illustrates the WEEME hair clipper being used for different hairstyles, including shaved heads and carving, highlighting its versatility.

Length Adjustment

The clipper offers a maximum cutting length of 11-20 mm and a minimum cutting length of less than 0.5 mm. Length adjustment is primarily achieved by changing the nozzles (guide combs).

Maintenance

Cleaning

  1. Ensure the hair clipper is turned off and the power cord is disconnected before cleaning.
  2. Remove any attached guide comb after use.
  3. Use the matched hair brush to clean off hair left on the blade. Do not use other solvents.
  4. For a more thorough cleaning, the blade can be removed. Press the mild part of the blade to detach it.
  5. Clean the main body of the product with a slightly wet and soft cloth. Do not use solvents or abrasive materials.
  6. After cleaning, reinsert the blade by aligning it with the plastic slot and pressing the mid-part until it snaps completely into place.

Blade Replacement

The hair clipper blade will wear to some degree after extended use. It is recommended to replace the blade or limit comb when necessary. Always cut off power to the hair clipper before replacing the blade.

  1. Press the mild part of the blade to remove it.
  2. Insert the new blade into the plastic slot.
  3. Press the mid-part of the blade and snap it into the slot until it is completely seated.
  4. Before each use, apply a small amount of lubricant to the blades for optimal performance.
  5. If you find it difficult to complete the re-attachment, press the on-off key to activate the hair clipper briefly, then repeat the process.

Specifications

Feature Detail
Brand WEEME (V-Vimika)
Model 806
Blade Material Titanium alloy fixed blade, Stainless steel
Motor Type Powerful high-speed motor (1500mAh), Vibratory
Power Type Power supply and battery operation
Battery Type Lithium battery (2700mAh)
Battery Charging Time Up to 2 hours
Battery Life About 90 minutes
Batteries Included Yes
Cutting Length Adjustment 5-speed regulator, Change of nozzles
Maximum Cutting Length 11 - 20 mm
Minimum Cutting Length Less than 0.5 millimeters
Number of Nozzles 5 or more pieces
Functions Wet hair cutting, Dry hair cutting, Knives under washing water, Fast charging, Charging indication
Purpose For bikini area, beard and mustache, body, eyebrows, head
Material (Body) Metal
Certificates CE
Dimensions of the WEEME hair clippers

Image: Diagram showing the dimensions of both the main hair clipper (16.5cm x 3.6cm x 3.5cm) and the detail trimmer (14.8cm x 4cm x 2.2cm).

Troubleshooting

If you encounter any issues with your WEEME 806 Hair Clipper Set, please refer to the following common solutions:

  • Clipper not turning on: Ensure the clipper is fully charged. Check that the On/off switch is firmly in the 'On' position.
  • Reduced cutting performance: Clean the blades thoroughly to remove any trapped hair. Lubricate the blades with a small amount of oil. If performance does not improve, consider replacing the blade or guide comb.
  • Charging indicator not working: Verify that the charging cable is securely connected to both the clipper and the power adapter.

For persistent issues, please contact customer support.

User Tips

  • Regularly clean and lubricate the blades to maintain optimal cutting performance and extend the life of your clippers.
  • Always ensure the clipper is fully charged before a grooming session to avoid interruptions.
  • When cutting hair, start with a longer guide comb and gradually reduce the length to achieve your desired style, especially if you are new to using hair clippers.

Warranty and Support

This product is manufactured to high-quality standards. Specific warranty details may vary by region and retailer. Please refer to your purchase documentation for warranty terms and conditions.

For technical support, spare parts, or any questions not covered in this manual, please contact the seller or manufacturer's customer service.

A user manual PDF is available for download. Scan the QR code below to access detailed instructions in your preferred language(s):

QR code for multi-language manual

Image: QR code to access detailed instructions in multiple languages. The PDF manual can be found at this link.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.