1. Introduction
This manual provides instructions for the installation, operation, and maintenance of your WenQia 433mhz Wireless Dimmer LED Light Switch. This remote-controlled dimmer module is designed to provide stepless dimming functionality for compatible LED and Halogen lamps, operating within an AC 110-250V range and supporting loads from 10W to 150W.
Figure 1: Wireless Dimmer LED Light Switch with stepless dimming.
2. Safety Information & Compatibility
- WARNING: Not suitable for lamps with transformers or ballasts.
- Ensure the power supply is disconnected before installation or maintenance.
- This device operates on AC 110V-250V, 50/60Hz.
- Maximum load capacity is 150W.
- Compatible with LED bulbs and Halogen lamps (without transformers or ballasts).
Figure 2: Compatible and incompatible lamp types.
3. Product Components
The product package typically includes the following items:
- 1x Mini Dimmer Receiver Module
- 1x RF433mhz Wireless Wall Panel Switch (battery 27A 12V included)
- 1x Remote Controller (battery CR2032*1 or CE2016*2 included)
- Mounting accessories: Screws, Double-sided tape
Figure 3: Dimmer module, wall panel switch, and remote control with accessories.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | WenQia |
| Model Number | DIMMER01+WP073DIM+KT07DIM |
| Wireless Communication | RF |
| Use | Lighting |
| Support APP | No |
| Origin | Mainland China |
| Certification | CE,RoHS |
| Switch Working Voltage | AC 110~250V 50/60 HZ |
| Max Load | 150W |
| RF Frequency | 433.92MHz |
| Receiver Size | 45*45*19mm |
| Code | 1527 learning code |
| Wall Panel Switch Size | 86*86*13 mm |
| Wall Panel Switch Battery | 27A 12V(included) |
| Included accessories | Screws, double-sided tape |
| Remote control size | 60*30*10 mm |
| Remote control Range | Up to 50m(theoretical distance) |
| Receiving Sensitivity | more than -97dbm |
| Amount of storage remote controls | About 15 pieces |
| Working Temperature | -30~+80 Celsius |
| Modulation Mode | ASK superheterodyne wireless reception |
| Quiescent Current | less than 5mA |
| Application Scenario | LED Halogen Bulb |
Figure 4: Product Certifications (CE, FC, UKCA, RoHS).
5. Installation
The dimmer module supports two wiring methods:
Wiring Method 1: Without Manual Switch
Connect the dimmer module directly to the lamp and AC 110-250V power supply as shown in the diagram. Ensure correct polarity for Live (L) and Neutral (N) connections.
Wiring Method 2: With Manual Switch
The dimmer module can be integrated with an existing manual wall switch. Connect the module to the lamp and power supply, and then wire the manual switch to the S1 and S2 terminals on the module. This allows for both wireless and manual control.
Figure 5: Wiring diagrams for the dimmer module.
The wall panel switch can be mounted using the included screws or double-sided tape.
6. Operation
Remote Control Functions:
- Press the 'Power' button (
) to turn the light ON/OFF. - Press the 'Brightness +' button (
) to brighten the light. - Press the 'Brightness -' button (
) to dim the light.
Wall Panel Switch Functions:
The wall panel switch provides similar control:
- Press the 'Power' button to turn the light ON/OFF.
- Press the 'Brightness +' button to brighten the light.
- Press the 'Brightness -' button to dim the light.
- Stepless Dimming: Long-press the manual switch button to achieve dimming functionality.
Brightness Memory Function:
When the light is turned on again after being turned off, the brightness will automatically return to the level it was at before it was last turned off.
Figure 6: Stepless dimming control.
Video 1: Product usage demonstration showing manual switch, remote control, and wall panel switch operation.
7. Pairing and Clearing Data
Signal pairing is required before first use or after clearing data.
How to Pair RF433Mhz Signal:
- Press the learning button on the receiver module 1 time.
- Immediately press any button on the remote control (or wall panel switch) 1 time.
- Wait for 3 seconds. The pairing is successful.
How to Clear Data:
- Press the learning button on the receiver module 8 times.
- All previously paired remote controls will be cleared from the receiver's memory.
Figure 7: Instructions for pairing and clearing RF433Mhz signals.
8. Troubleshooting
- Light does not turn ON/OFF with remote: Ensure the remote control is properly paired with the receiver module. If not, follow the pairing instructions in Section 7.
- Dimming function not working: Verify that the connected lamp is compatible (LED or Halogen without transformer/ballast). Some bulbs may not support dimming, even if the ON/OFF function works.
- Remote control range issues: Ensure there are no significant obstructions between the remote and the receiver. The theoretical range is up to 50m in open space, but indoor environments may reduce this to 20-30m.
- Light does not respond to manual switch: Check the wiring connections to the S1 and S2 terminals on the dimmer module (if using Wiring Method 2).
9. User Tips
- For optimal performance, ensure your lamps are explicitly labeled as dimmable LED or halogen bulbs.
- While the ON/OFF function is generally universal, the dimming capability can vary with different bulb types.
- Consider the placement of the receiver module to maximize wireless signal reception.
10. Maintenance
- Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
- Replace remote control batteries (27A 12V for wall panel, CR2032*1 or CE2016*2 for remote) when control range decreases or buttons become unresponsive.
- Do not attempt to repair the device yourself. Contact qualified personnel for service.
11. Support
For further assistance or detailed information, please refer to the official user manual PDF:
You may also contact the manufacturer for support:
- WhatsApp: +86 135 02278583 / +86 181 3880 5271
- Email: dieseelectronic@163.com