1. Product Overview
This series of metal indicator lights features a stainless steel housing, offering excellent corrosion resistance, durability, and a wide range of color options. They are available in spherical and flat lens types to suit various installation requirements.
Key Features:
- Durable Construction: Stainless steel housing for corrosion resistance.
- IP67 Rated: Dust and water resistant.
- Long Lifespan: Ultra-long LED lifespan for continuous operation.
- Easy Installation: Panel mount with lock-nut fastening.
- Multi-Voltage: Compatible with 3V, 5V, 6V, 12V, 24V DC, and 110V/220V AC/DC.
- Multiple Colors: Available in Red, Green, Blue, Yellow (Amber), White.
- Various Sizes: Available in 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 19mm, 22mm, 25mm, 28mm, 30mm.


2. Technical Specifications
| Parameter | Specification | Remarks |
|---|---|---|
| Housing Material | Stainless Steel | Corrosion resistant |
| Panel Cutout Size | 6mm/8mm/10mm/12mm/14mm/16mm/19mm/22mm/25mm/28mm/30mm | As per model |
| Operating Voltage | 3V/5V/6V/12V/24V/110V/220V AC/DC | Specify on order |
| Light Source | LED | Long lifespan |
| Current | 3mA~20mA | |
| IP Rating | IP67 (with waterproof ring) | Dust & waterproof |
| Operating Temperature | -25°C ~ +70°C | |
| Connection Type | Solder Pins or Screw Terminals | See wiring diagram |
| Material | Copper | |
| Certification | CCC | |
| Warranty | One year |
Lens Types:
- Spherical Model: Convex dome lens, wider viewing angle, suitable for general indication.
- Flat Model: Flat surface lens, flush or near-flush mounting, low-profile, sleek appearance.


3. Parts & Components
| No. | Part Name | Description |
|---|---|---|
| 1 | Indicator Body | Stainless steel shell with LED lens. Available in spherical or flat type. |
| 2 | Mounting Nut | Hex nut for panel fixing. |
| 3 | Waterproof Ring | O-ring rubber seal, required for IP67 protection. |
| 4 | Pins / Screw Terminals | For electrical connection. |

4. Installation Instructions
- Select Panel Cutout: Choose the correct panel cutout size according to your indicator model (e.g., 8mm, 12mm, 22mm).
- Place Waterproof O-ring: Position the waterproof O-ring onto the indicator body before inserting it through the panel hole.
- Secure Mounting Nut: From the back of the panel, thread on the mounting nut and tighten by hand. Then, use a wrench to secure it. Do not over-tighten.
- Connect Wires: Connect the wires to the correct terminals. For pin-type models, solder wires to the pins. Observe correct polarity (+/-).
- Verify Operation: Apply the rated voltage and confirm the indicator lights up correctly.
5. Wiring Guide
Pin-Type Wiring:
- Connect the + (anode) pin to the positive supply.
- Connect the - (cathode) pin to negative/ground.
- Solder connections and insulate them properly.
Screw Terminal Wiring:
- Loosen the terminal screw.
- Insert the wire and tighten the screw securely.
- Recommended wire gauge: 0.5~1.5mm².
For a visual guide, refer to the wiring diagram in the user manual PDF.
6. Safety Precautions
- Do NOT exceed the rated voltage.
- Disconnect power before installation or maintenance.
- Ensure the waterproof ring is properly seated for IP67 protection.
- Do NOT use in explosive or highly flammable environments.
- Keep away from excessive heat sources (>70°C).
- Do NOT modify or disassemble the indicator light.
7. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power / Wrong voltage / Reversed polarity | Check supply voltage and polarity. |
| Dim or flickering | Voltage too low / Poor connection | Verify voltage; check terminal connections. |
| Water ingress | Missing or improperly fitted waterproof ring | Reinstall or replace the O-ring. |
| LED burned out | Overvoltage or reverse polarity | Replace unit; verify correct voltage and polarity. |
8. User Tips
- When installing, ensure the correct voltage variant (3-6V, 12-24V, or 220V) is used for your application to prevent damage.
- For 220V applications, always double-check the wiring to ensure safety and proper function.
- The waterproof ring is crucial for maintaining the IP67 rating; ensure it is correctly seated during installation.
9. Warranty and Support
This product comes with a one-year warranty from the date of purchase.
Specifications are subject to change without notice. For technical support or any inquiries, please contact your supplier.
A detailed user manual in PDF format is available for download: User Manual (PDF)