ludengchaoshi Modern Nordic Retro Ceiling Fan

Contents

User Manual: Modern Nordic Retro Ceiling Fan

Model: Modern Nordic Retro Ceiling Fan

Introduction

Thank you for purchasing the ludengchaoshi Modern Nordic Retro Ceiling Fan. This manual provides important information regarding the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before installation and keep it for future reference. Ensure all users are familiar with the safety warnings and operating procedures.

This ceiling fan features a modern Nordic retro design, high airflow, and comes with a remote control for convenient operation. It is suitable for various living spaces such as living rooms and dining rooms.

Safety Instructions

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read and follow all instructions carefully.

  1. To reduce the occurrence of electric shock, the supply line must be connected between the fan and an all-pole disconnect switch. The switch contacts opening distance requirements should be at least 3mm. If you lack electrical knowledge, please ensure a professional electrician performs the installation.
  2. To avoid electrical shock hazard, ensure the ceiling fan is disconnected from the power supply before installation or removal. Installation order: ground, live wire, zero line. Disassembly order: zero line, live wire, earth.
  3. To reduce electric shock or accidents, do not use non-local governors or switch products.
  4. When installing a ceiling fan, ensure all screw parts are securely latched.
  5. When the ceiling fan is rotating, the blades should not touch any object to avoid danger.
  6. Select an appropriate location for installation. The ceiling fan blade should be at least 2.3 meters (7.5 feet) or more above the ground to prevent accidental blade collision.
  7. To change the fan rotation direction, turn off the fan and wait for the blades to stop turning before adjusting the reversing switch.
  8. The power of this machine is 220V/550Hz. The maximum motor power is 75W (specifications vary by model). Each light source lamp has a maximum power of 60W.
  9. Read the fan assembly procedures carefully for instructions on how to install the ceiling fan and connect the power.
  10. Do not clean the ceiling fan blades with clean water or detergent directly. Use a dry cloth or slightly damp cloth to wipe. Before cleaning, the ceiling fan must be disconnected from the power switch.

WARNING: If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact the manufacturer, its service agent, or suitably qualified persons.

The replacement of parts of the safety suspension system device shall be performed by the manufacturer, its service agent, or suitably qualified persons. If it is necessary to replace the live or neutral brushes to ensure operation of the motor, then both brushes and the earth brush shall be replaced at the same time. The brushes shall only be replaced by a suitably qualified person.

Parts List

Before installation, please check the carton contents against the following list:

No. Part Name
1 Ceiling fan body (including motor, housing, switch boxes)
2 Hanger
3 Bell
4 Hanging tube assembly
5 Glass shade
6 Leaf frame
7 Splice closure
8 Lamp units
9 Blade
10 Parts screw package (contains expansion screws, wood screws, flat washers, wiring tablets, sling bag, balanced package, leaf frame screws package, blade screw package)

Note: A detailed diagram (Figure 1 in the original manual) illustrating these parts is typically provided.

Setup and Installation

1. Hanger Locking Mode

NOTE: Do not install the hanger on a roof that is leaking or damp. The hanger, after installation, must be able to withstand a weight of 40 kg or more to prevent it from falling.

  • For Concrete Ceilings: Use a drill to make two holes (distance between holes should be appropriate) in the ceiling. Insert expansion screws into the holes, then secure the hanger expansion screw set with flat washers and nuts, tightening with a spanner wrench.
  • For Wooden Ceilings: Lock the hanger onto the ceiling with a screwdriver using wood screws.

NOTE: Do not install on an uneven ceiling. The ceiling-mounted hanger must be firmly secured.

2. Suspension System Installation

  1. Connect the housing boom and bell. Insert the lifting boom head into the holes, align with the holes, then insert the pin and R pin through the bolt holes. Screw on the side of the head hanging locking.
  2. Hang the ceiling fan on the hanger, ensuring the hanger slot aligns with a card.

Note: Detailed diagrams (Figures 4, 5, 6 in the original manual) for these steps are typically provided.

3. Power Cord Connection

  1. Hang up the fan and connect the wiring according to the wiring diagram.
  2. Ensure the fixed wiring is connected with a contact separation of at least 3mm all-pole disconnect device.

Note: A wiring diagram (Figure 10 in the original manual) is crucial for this step.

4. Installing Locking Bell and Leaves

  • Locking Bell: Align the bell cast hanger, hanger hole, and side holes, then lock the screws.
  • Installing Leaves: Align the Yasha and blade alignment holes, then tighten the screws.

Note: Diagrams (Figures 11, 12 in the original manual) for these steps are typically provided.

5. Lighting Installation (if applicable)

Depending on the style with lamps, the ceiling fan light can be installed in multiple lamp or single lamp series:

  • Multi-Light Installation:
    1. Connect the fixture's white and blue lines to the switch box's corresponding white and blue lines. Tighten the connection wiring beans and lock the bonnet, then the shade.
    2. Neatly place the lamp lines into the switch box. Align the notch on the switch cover with the switch and lock with three screws.
    3. Loosen the screws on the lamp cup by hand. Set the glass shade lamp cup and hand-tighten the three screws on the side of the lamp cup to avoid the risk of falling. Ensure screws are firmly tightened but not overtightened to prevent breaking the glass lampshade.
  • Single Lamp Installation I:
    1. Remove the switch cover and connect the lamp cover.
    2. Replace the cover under the switch to the switch box.
    3. Replace the lamp. Loosen the lamp panel on three screws, fit with glass, and then tighten the screws.
  • Single Lamp Installation II:
    1. Remove the switch cover and connect the lamp cover.
    2. Replace the cover under the switch to the switch box.
    3. Sequentially thread lampshades, decorative covers, and the decorative head through the chain. Secure the ornaments with the head lock teeth of sturdy glass.

Note: Detailed diagrams (Figures 14-20 in the original manual) for these steps are typically provided.

Operating Instructions

Fan Speed and Rotation

The fan features 6-speed regulation, intelligent timing, and forward/reverse rotation, controlled by the remote control.

Variable Frequency 6-Speed Settings Diagram

Variable Frequency 6-Speed Settings: First and second gears provide soft air supply, three and four gears offer a gentle breeze, and five and six gears deliver strong incoming wind.

  • Adjusting Fan Speed: Use the remote control to select from 6 speeds.
  • Stopping Rotation: Use the remote control to turn off the fan.
  • Reverse Rotation (Winter Mode): The fan can be set to reverse rotation (wind blowing upwards) to circulate warm air, reducing temperature differences in winter.
  • Forward Rotation (Summer Mode): The fan can be set to forward rotation (wind blowing downwards) for enhanced cold air flow and strong wind power in summer.
Summer and Winter Airflow Modes Diagram

Summer and Winter Airflow Modes: In summer, the fan rotates to enhance cold airflow. In winter, it reverses to reduce temperature differences and circulate warm air.

Remote Control Functions

The remote control allows you to:

  • Turn the fan ON/OFF.
  • Adjust fan speed (6 levels).
  • Set intelligent timing.
  • Switch between forward and reverse rotation.
  • Control the light (if applicable).

Maintenance

Ceiling Fan Maintenance Tips

  1. Because the ceiling fan is a functioning product, regularly check the hanger, blade, leaf frame, and various other parts for looseness.
  2. Regularly clean the ceiling fan. Only wipe lightly with a soft brush or lint-free cleaning cloth. Do not use a damp cloth or other destructive cleaning agents.
  3. Do not add lubricant to any part of this product.

Troubleshooting

Fan Not Rotating

  • Check if the ceiling fan's external power supply circuit fuse is blown or if the automatic protection switch is off.
  • Check for any issues with the fan power line contact.
  • Verify that the fan power supply voltage is normal.

Note: Always ensure the external power is off when checking. If you are still unable to resolve the issue, consult a professional electrical maintenance expert.

Fan Noise

  • Check that all fan screws are securely installed and locked.
  • Check whether the motor has any friction obstacles during operation.

Lamp Not Lighting

  • Check if the lamp wire port is loose.
  • Check if the lamp is damaged.

Larger Shaking Treatment (Balance Check and Adjustment)

Note: Be careful to avoid collision with other objects causing leaf frame deformation during blade assembly.

  1. Carefully re-read the instructions and ensure all installation steps are correct.
  2. Check that all mounting screws are tight and that the lob slot is correctly engaged with the rack card points.
  3. Check that all blades are at the same level. Select the same slice of each blade section and measure the height from the ceiling to ensure consistency.
  4. If the above methods are ineffective, use the machine parts bag's attached balance adjustment package. Start by placing the balance in the middle of any clip on a blade.

Note: A diagram (Figure 21, 22 in the original manual) illustrating balance adjustment is typically provided.

Specifications

Feature Detail
Brand Name ludengchaoshi
Item Type Ceiling Fans
Style Modern Style
Installation Method Assembly
Body Material ABS, IRON, Wood
Power Source AC
Control Method REMOTE CONTROL
Switch Type REMOTE CONTROL
Luminous Flux 2000-82000 (Varies by model)
Is Dimmable No
Is Bulbs Included No
Is Batteries Included No (for remote control)
Certification CE, ROHS
Origin Mainland China
Warranty 1 year
Package Length 79 cm
Package Width 20 cm
Package Height 19 cm
Package Weight 4.619 kg
Diameter (42-inch model) 106 cm
Overall Height (with 20cm boom) 37 cm

Note: Specific dimensions and features may vary slightly depending on the exact model (e.g., 42-inch, 52-inch, 60-inch) and blade material (ABS or Solid Wood).

42-inch Black Walnut Model Dimensions and Features

Example dimensions for a 42-inch model, showing overall height of 37cm and diameter of 106cm.

Available Blade Colors and Materials

Available blade options include ABS-WHITE, ABS-BLACK, ABS-WALNUT, and SOLID-WOOD.

User Tips

  • The remote control allows for convenient scheduling of fan operation. Explore the timing functions for automated use.
  • The fan's dual-direction rotation is effective for both summer cooling and winter heat circulation. Utilize the reverse function in colder months to help distribute warm air.
  • Ensure the fan is securely mounted to prevent any wobbling, which can be a sign of improper installation or loose parts.

Frequently Asked Questions (FAQ)

Q: What is the weight of the fan?
A: The package weight is approximately 4.619 kg. The actual product weight may vary slightly.
Q: What is the diameter of the fan?
A: For a 42-inch model, the diameter is 106 cm. Please refer to the specifications section or product details for the exact dimensions of your specific model.

Warranty and Support

This product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For technical support, warranty claims, or further assistance, please contact the seller or refer to the official product documentation. A detailed user manual in PDF format may be available for download from the seller's website or by contacting customer support. (Reference: User manual (PDF))

© 2024 ludengchaoshi. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.