RACBOX Tail Light Assembly for Isuzu Dmax/Holden Rodeo Pickup

Contents

RACBOX Tail Light Assembly User Manual

Model: Tail Light Assembly for Isuzu Dmax/Holden Rodeo Pickup (2002-2006)

1. Introduction

This manual provides essential information for the safe and effective installation and operation of your RACBOX Tail Light Assembly. This product is an auxiliary accessory for automotive lighting, intended for the normal replacement and upgrade of original car lights. It functions as a stop, brake, and turn signal lamp. Please read all instructions carefully before use.

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Package Contents

Your package should contain the following:

  • 1 Pair (Left & Right) Tail Light Assemblies
  • Note: Light bulbs and wires are NOT included.
Front and back view of the RACBOX Tail Light Assembly
Figure 1: Front and back views of the Tail Light Assembly.

4. Specifications

Attribute Value
Product Type Tail Light Lamp / Tail Light Assembly
Brand Name RACBOX
Lens Color Red & Clear
Placement on Vehicle Rear, Right, Left
Housing Material ABS Plastic
Lens Material PMMA, ABS plastic
OEM NO. 8972347491, 8972347501
Package Length 35 cm
Package Width 20 cm
Package Height 12 cm
Package Weight 0.77 kg
Diagram showing the dimensions of the tail light: 180mm width and 340mm height.
Figure 2: Product dimensions (180mm width, 340mm height).
Rear view of the tail light assembly showing the bulb sockets.
Figure 3: Rear view of the tail light showing bulb sockets.

5. Compatibility

This tail light assembly is designed to fit the following vehicle models:

  • Isuzu Dmax Pickup (2002, 2003, 2004, 2005, 2006)
  • Holden Rodeo Pickup (2002, 2003, 2004, 2005, 2006)

Please confirm that this product matches your car before purchase. Reference OE/OEM Numbers: 8972347491, 8972347501.

RACBOX Tail Lights installed on the rear of a pickup truck.
Figure 4: Tail lights installed on a compatible pickup truck.

6. Installation Instructions

Professional installation is highly recommended.

  1. Turn off the vehicle engine and disconnect the power supply to avoid short circuits.
  2. Locate the mounting position of the original tail light.
  3. Remove the fixing screws or clips that hold the stock light assembly.
  4. Unplug the power connector and remove the original tail light.
  5. Install the new tail light assembly into the mounting position.
  6. Secure the light assembly with screws or clips to ensure stable installation.
  7. Connect the power plug correctly. If the light does not work, reverse the plug polarity.
Image showing the tail light assembly and its position on the rear of a pickup truck, indicating the installation area.
Figure 5: Overview of the tail light and its mounting location on a truck.

7. Operating Instructions

After installation, perform the following steps to ensure proper operation:

  1. Test all light functions (stop, brake, turn signal) to ensure normal operation.
  2. Recheck all screws and connections to make sure they are firm and reliable.

8. Maintenance

To ensure the longevity and optimal performance of your tail light assembly:

  • Regularly inspect the lights for any cracks, damage, or loose connections.
  • Clean the lens periodically with a soft cloth and mild automotive cleaner to maintain clarity and light output.
  • Ensure all bulbs (not included with this assembly) are functioning correctly and replace them as needed according to your vehicle's specifications.

9. Troubleshooting

If the tail light does not function after installation:

  • Check Power Connection: Ensure the power plug is securely connected.
  • Reverse Polarity: If the light does not work, try reversing the plug polarity.
  • Bulb Check: Verify that the bulbs (not included) are correctly installed and are not faulty.
  • Professional Assistance: If issues persist, it is recommended to seek assistance from a qualified automotive technician.

10. User Tips

  • Confirm Quantity: The product is typically sold as a pair (left and right), but always confirm the specific order details to ensure you receive the correct quantity for your needs.
  • Bulbs Not Included: Remember that this assembly does not include light bulbs or wiring. You will need to use your existing bulbs and wiring or purchase new ones separately.
  • Professional Installation: While installation steps are provided, if you are not confident in your automotive repair skills, professional installation is strongly advised to prevent damage and ensure proper function.

11. Manufacturer & EU Representative Information

Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, China

EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND

12. Compliance Information

This product is an auxiliary accessory for automotive lighting and is only used for the normal replacement and upgrade of the original car lights. It is not intended for illegal modification or illegal use. The products meet relevant national automotive lighting industry standards, have undergone strict quality testing before leaving the factory, and are qualified for use.

For a detailed user manual in PDF format, please refer to the official documentation available from the seller. (Reference: User manual (PDF))

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.