Product Overview
The IKSLED F100 is a 12V LED Dimmable Touch Sensor Switch designed for seamless integration into various surfaces, particularly wood panels. It allows for convenient control of LED lighting with touch functionality, including on/off and dimming capabilities. This switch is ideal for smart home applications and customized lighting setups.
The sensor is designed to work through various penetrable materials such as paper, plastic, acrylic, glass, wood, and rock/stone. The effectiveness of the sensing distance can vary based on the material's thickness and density.
Setup Instructions
Please follow these steps carefully for proper installation:
- Prepare the Wiring: Refer to the wiring diagram below to connect the switch to your LED light and power source. Ensure correct polarity (positive and negative poles) to avoid malfunction.
- Connect the Light: Connect your LED light to the output of the touch sensor switch.
- Fix the Induction Switch: Securely fix the induction switch in its desired location, ensuring it does not move during use. Movement can cause the switch to constantly sense the environment, leading to erratic behavior.
- Apply Power: Once all connections are secure and the switch is fixed, turn on the power to use the device.
Attention: Induction switches are not suitable for controlling motors, solenoid valves, solar lights, constant current lamps, or other similar equipment. This switch is designed specifically for LED lighting.
For a visual guide on installation, please watch the product demonstration video:
Operating Instructions
The IKSLED F100 touch sensor switch comes in two main models, A and B, each with slightly different operating modes:
Model A: Touch On, Leave Off
This model operates with a simple touch to turn the light on. To turn the light off, you remove your hand from the sensing area. It does not feature dimming functionality.
Model B: Touch On, Touch Off, Long Touch Dimmable
This model offers more advanced control:
- Short Touch: A brief touch will toggle the light on or off.
- Long Touch: Press and hold your finger on the sensing area to dim the light. The brightness will cycle through its dimming range. Release your finger when the desired brightness is achieved.
Maintenance
To ensure the longevity and optimal performance of your IKSLED touch sensor switch, please observe the following maintenance guidelines:
- Keep the sensor and surrounding area dry. Avoid exposure to moisture or liquids.
- Regularly check that the induction switch is securely fixed and not moving, as movement can interfere with its operation.
- Avoid placing metal objects or other wires too close to the sensor, as this can cause interference and affect its sensitivity.
- Clean the surface above the sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
If your LED light remains on or off, or the switch does not respond as expected, consider the following common issues and their resolutions:
- Mismatch of Working Voltage:
- Problem: The power adapter's output voltage or the LED light's required voltage does not match the switch's operating voltage (3V, 3.7V, 5V, 12V, 24V).
- Resolution: Confirm that your power adapter provides a constant voltage (DC3.7V, 5V, 12V, or 24V) and that your LED light is compatible with the same voltage. All components must match.
- Input/Output and Positive/Negative Poles are Reversed:
- Problem: The wiring for the input power or the output to the LED light has incorrect polarity.
- Resolution: Carefully check the wiring diagram and ensure that the positive (+) and negative (-) poles for both the input power and the LED light output are connected correctly. Reverse any incorrect connections.
- The Switch is Not Fixed or Moves During Use:
- Problem: If the induction switch is not securely fixed or moves while in operation, it may constantly sense changes in its environment, leading to erratic on/off behavior or unresponsiveness.
- Resolution: Turn off the power, then firmly fix the induction switch in place. Ensure it is stable and cannot shift during normal use. Once fixed, restore power.
Important: This switch is designed for LED lighting only. Do not attempt to use it with motors, solenoid valves, solar lights, constant current lamps, or other incompatible equipment, as this may damage the switch or the connected device.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | IKSLED |
| Model Number | F100 (Touch switch sensor) |
| Item Type | SWITCHES |
| Switch Type | Touch On/Off Switch |
| Features | Penetrable switch sensor |
| Working Voltage | DC 3V, 3.7V, 5V, 12V, 24V |
| Maximum Load (Wattage) |
|
| Current | 4A |
| Material | Plastic |
| Certification | CCC |
| Is Smart Device | No |
| Origin | Mainland China |
| Sensing Distance (Max) | Up to 80mm (through non-metallic materials) |
| Package Weight | 0.062 kg |
| Package Dimensions (L x W x H) | 17 cm x 13 cm x 2 cm |
User Tips
- Sensing Distance: While rated for up to 80mm, real-world sensing distance can vary. Users report successful operation through 1.8cm to 3.5cm thick cabinets and 18mm plywood. Thicker or denser materials (like 4cm kitchen counters) may reduce sensitivity.
- Dimming Response: For Model B, dimming by long-touch may have a slight delay before sensing the still hand. Maintain contact until the desired brightness is reached.
- Sensor Placement: Be mindful that the sensor can detect from both sides (up and down). Consider this during installation if you only want detection from one specific direction.
- Interference: Ensure no other wires or metallic objects are in the immediate vicinity of the sensor to prevent interference and ensure reliable operation.
- Power Source: Confirm your power supply is DC (Direct Current). This switch is not compatible with AC (Alternating Current).
Warranty and Support
This product comes with a 1-year warranty.
For further details, including comprehensive diagrams and additional information, you may refer to the official user manual PDF: View User Manual (PDF)