TOPPING P50

Contents

TOPPING P50 Low Noise Linear Power Supply User Manual

Model: P50

1. Introduction

Thank you for purchasing the P50 audio linear power supply! The TOPPING P50 is a high-quality linear power supply featuring one 15V/1A DC output and two 5V/1A DC outputs. It supports both 110V and 220V AC input voltages. We are confident that the P50 will enhance your audio experience. Please read this manual thoroughly to correctly utilize all the features of your P50 unit.

TOPPING P50 Linear Power Supply in black and silver finishes
Figure 1.1: TOPPING P50 Linear Power Supply (Black and Silver models)

2. Package Contents

Please check the package for the following items:

  • P50 Unit: 1
  • AC Cable: 1
  • 0.2m USB to DC Line: 1
  • 0.2m DC to DC Line: 1
  • 1.2m DC to DC Line: 1
  • User's Manual: 1
  • Warranty Card: 1

Note: An electronic version of this user manual can be downloaded from www.tpdz.net.

3. Product Overview

3.1 Front Panel

Front view of the black TOPPING P50 unit
Figure 3.1: Front view of the TOPPING P50 (Black)
  • 1-1 Power Indicator: Illuminates when the unit is powered on.

3.2 Rear Panel

Rear panel of the black TOPPING P50 unit showing AC input, power switch, fuse, and DC outputs
Figure 3.2: Rear panel connections of the TOPPING P50
  • 2-1 Power Switch: Toggles the unit on/off.
  • 2-2 Fuse: Protective fuse for the AC input.
  • 2-3 AC Power Input: Connects to the main AC power supply.
  • 2-4 DC 5V*2 Output: Two 5V/1A DC outputs (USB-A type).
  • 2-5 DC 15V Output: One 15V/1A DC output (5.5/2.1mm barrel connector).

3.3 Side Panel Voltage Setting

Side view of the black TOPPING P50 unit showing the voltage selector switch
Figure 3.3: Side panel voltage selector switch
  • 3-1 Voltage Selector Switch: This switch allows selection between 115V and 230V AC input.
    • 115V: For AC100V-120V 50/60Hz regions.
    • 230V: For AC220V-240V 50/60Hz regions.

4. Setup

  1. Select Correct Voltage: Before connecting the power cable, ensure the voltage selector switch (3-1 on side panel) is set to match your local AC mains voltage (115V or 230V). Incorrect voltage selection will damage the P50.
  2. Connect AC Power: Plug the provided AC cable into the AC Power Input (2-3 on rear panel) and then into a wall outlet.
  3. Connect Audio Devices:
    • For devices requiring 5V DC, use the 0.2m USB to DC line or 0.2m DC to DC line with the DC 5V*2 Outputs (2-4 on rear panel).
    • For devices requiring 15V DC, use the 1.2m DC to DC line with the DC 15V Output (2-5 on rear panel).
  4. Grounding (Recommended): For optimal noise reduction and best output quality, it is recommended to use a three-phase power cable that includes a ground terminal. Ensure the ground connection is reliably established.

5. Operating Instructions

  1. After connecting all cables, flip the Power Switch (2-1 on rear panel) to the 'ON' position.
  2. The Power Indicator (1-1 on front panel) will illuminate, indicating the unit is operational.
  3. Your connected audio devices should now receive stable, low-noise power from the P50.
  4. When operating at high power output, the unit's casing may become quite warm. This is normal and does not indicate a malfunction.

6. Maintenance and Precautions

  • Short Circuit Prevention: Ensure that the output jacks are never short-circuited or connected to ground incorrectly.
  • Environmental Conditions: Do not place the power supply in hot, humid environments, or expose it to strong shocks or rain.
  • Indoor Use Only: This unit is designed for indoor use exclusively.
  • Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Do not use liquid cleaners or solvents.
  • Servicing: Do not attempt to open the case or repair the unit yourself. Opening the case will instantly void the warranty. For any maintenance or repair needs, please contact qualified professional service personnel.

7. Troubleshooting

Problem Possible Cause Solution
Unit does not power on. No AC power; Power switch off; Incorrect voltage setting; Blown fuse. Check AC cable connection; Ensure power switch is ON; Verify voltage selector switch setting; Check and replace fuse if necessary.
No output from DC ports. Unit not powered on; Output cable disconnected; Device not compatible. Ensure unit is powered on; Check DC cable connections; Verify connected device requires 5V or 15V DC.
Excessive heat from casing. Normal operation at high output. This is normal. Ensure adequate ventilation around the unit.
Audio noise/hum. Poor grounding; Interference from other devices. Ensure proper grounding with a three-phase power cable; Isolate the P50 from other noisy electronic devices.

8. Specifications

Attribute Value
Dimensions (L x W x H) 11.0cm x 11.0cm x 5.3cm
Weight 0.88 Kg
Power Input AC110V/AC220V* (selectable)
Power Output 1 USB-A x2 (DC 5V/1A each)
Power Output 2 DC(5.5/2.1) (DC 15V/1A)
Power Supply Noise < 1 mVrms
Maximum Output Power*
  • (1) DC5V 1A x2
  • (2) DC15V 1A
  • (3) DC5V 1Ax1 + DC15V 0.9A
  • (4) DC5V 0.8Ax2 + DC15V 0.8A
Hign-concerned Chemical None
Package Yes
Maximum Power Per Channel NO POWER (This refers to the P50 being a power supply, not an amplifier)
Brand Name TOPPING
TOPPING Model P50
Origin Mainland China

*Warning: Always select the correct voltage for your local region. The unit's shell may become warm during high power output, which is normal.

9. User Tips

  • Audio Performance: Users have noted that the P50's proper packaging and design contribute to an improved sound quality when powering DACs.
  • Cable Management: Utilize the provided USB to DC and DC to DC cables for optimal connection to compatible TOPPING devices.
  • Ventilation: While normal for the unit to get warm at high output, ensure it is placed in a well-ventilated area to prevent excessive heat buildup.

10. Warranty and Support

Your TOPPING P50 comes with a warranty card included in the package. Please refer to the warranty card for details regarding coverage and terms.

For further support, updated manuals, or driver downloads, please visit the official TOPPING website: www.tpdz.net.

A PDF version of this user manual is also available for download from the manufacturer's website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.