WAAJEA LED Wall Light-3w

Contents

WAAJEA LED Wall Light-3w Instruction Manual

Model: LED Wall Light-3w

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your WAAJEA LED Wall Light-3w. Please read it thoroughly before installation and keep it for future reference.

WAAJEA LED Wall Light-3w in black and white, installed and illuminated

Figure 1: WAAJEA LED Wall Light-3w (Square Model)

2. Safety Information

  • Always disconnect power before installation or servicing.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Ensure the power supply voltage matches the product specifications.
  • Do not modify the product in any way.
  • Keep away from flammable materials.

3. Package Contents

Please check that all components are present:

  • WAAJEA LED Wall Light-3w unit
  • Mounting screws (typically included, verify upon opening)
  • Instruction Manual (this document)

4. Setup and Installation

The WAAJEA LED Wall Light-3w is designed for recessed installation. It is a self-contained unit.

  1. Prepare the Installation Area:

    Ensure the power supply to the installation area is turned off at the circuit breaker.

    For the round model, prepare a circular hole with a diameter of 64mm and a depth of at least 44mm. For the square model, ensure appropriate dimensions for recessed fitting.

    Diagram showing dimensions for the round recessed light: 84mm diameter front, 64mm diameter back, 43mm depth. Also lists specifications.

    Figure 2: Round Model Dimensions and Specifications

  2. Wiring:

    Connect the light's input wires to your AC power supply (85-265V). Ensure proper polarity if indicated, though typically for AC, live and neutral can be connected without strict polarity for the light itself. Always ensure secure connections using appropriate connectors.

    Back view of the square LED step light showing the sealed enclosure with screws and cable entry point.

    Figure 3: Rear View of Square Light with Cable Entry

    The light unit is sealed for outdoor use (IP65), ensure the cable entry point is properly sealed after wiring to maintain waterproof integrity.

  3. Mounting:

    Carefully insert the light fixture into the prepared hole. Secure it using the provided mounting screws or clips, ensuring it sits flush with the surface.

  4. Final Check:

    Once securely installed and wired, restore power at the circuit breaker and test the light.

5. Operating Instructions

This LED Wall Light-3w model does not include a built-in sensor. It requires an external switch to control its operation.

  • Ensure the light is properly installed and connected to a power source.
  • Use a standard wall switch (not included) to turn the light ON or OFF.
Hand holding the black square LED step light, front view.

Figure 4: Front View of Square Light

6. Maintenance

  • Cleaning: To clean the light fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check the fixture for any signs of damage or loose connections, especially if installed outdoors.
  • LED Lifespan: The integrated LED chip is designed for long-term use and does not require replacement.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.No power supply.
Loose wiring connection.
Faulty switch.
Check circuit breaker.
Verify all wire connections are secure (power off first).
Test the switch.
Light flickers.Unstable power supply.
Loose connection.
Ensure stable power.
Check wiring connections.

8. Specifications

FeatureDetail
Brand NameWAAJEA
Model NumberLED Wall Light-3w
Power3W
Input VoltageAC 85-265V
Light SourceLED chip
Luminous Flux249-2000 Lumens
Color TemperatureWarm White 3000K, Neutral White 4000K (depending on model)
MaterialAluminum (Body Material)
IP GradeIP65 Waterproof
Installation TypeRecessed In (Self-contained)
Lighting Area1-3 square meters
CertificationCE, ROHS
Is DimmableNo
Is Smart DeviceNo
FeaturesWaterproof Night Lighting, Heat Resistant, Anti-Rust, Weather Resistant
Dimensions (Round Model)Front Diameter: 84mm, Back Diameter: 64mm, Depth: 43mm
Hole Size (Round Model)Diameter 64mm x Depth 44mm
Outdoor stair lights in the rain, with icons indicating Heat Resistant, Anti-Rust, Weather Resistant, and Waterproof features.

Figure 5: Durability Features

9. User Tips

  • Installation Compatibility: The light is designed to fit standard European mechanism boxes, which can simplify installation in compatible regions.
  • Quality Assurance: Users have noted the lights appear well-made with good wiring, suggesting a durable product. Proper installation will help ensure longevity.
  • Aesthetic Integration: The minimalist design allows for easy integration into various decor styles, providing a modern and elegant touch.

10. Warranty and Support

This WAAJEA LED Wall Light-3w comes with a 2-year warranty from the date of purchase, covering manufacturing defects.

For technical support, warranty claims, or further assistance, please refer to the seller's contact information or the official product page.

A detailed user manual in PDF format may also be available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.