LCTC DR-15, DR-60, DR-100 Series

Contents

LCTC DR Series DIN Rail Switching Power Supply User Manual

Models: DR-15, DR-60, DR-100 Series

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your LCTC DR Series DIN Rail Switching Power Supply. The DR series includes models with 15W, 60W, and 100W power ratings, offering various output voltages (5V, 12V, 15V, 24V) suitable for industrial applications.

For detailed product selection and further information, please refer to the official product catalog: LCTC Switching Power Supply Product Catalog (PDF).

LCTC DR Series Switching Power Supplies
Figure 1: LCTC DR Series Switching Power Supplies (15W, 60W, 100W models shown with 5V, 12V, 15V, 24V output options).

This image displays the range of LCTC DR series power supplies, highlighting their DIN rail installation capability and available power outputs.

Video 1: LCTC DR Series Product Showcase.

A brief video showcasing the physical appearance and different models of the LCTC DR series switching power supplies.

2. Safety Information

Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.

  • Qualified Personnel: Installation and servicing must be performed by qualified personnel only.
  • Power Disconnection: Always disconnect power before installation, wiring, or maintenance.
  • Proper Grounding: Ensure the power supply is properly grounded to prevent electric shock.
  • Indoor Use: These power supplies are designed for indoor use in a protected environment only.
  • Ventilation: Ensure adequate ventilation around the unit to prevent overheating. Do not block ventilation openings.
  • Risk of Electric Shock: Do not open the casing of the power supply. There are no user-serviceable parts inside.
  • Voltage Check: Verify that the input voltage range of the power supply matches your mains supply before connecting.
  • Wiring: Use appropriate wire gauges for input and output connections to handle the rated current. Ensure all connections are secure.

3. Product Overview and Features

The LCTC DR Series switching power supplies are compact, high-efficiency units designed for DIN rail mounting, making them ideal for industrial control systems, automation, and other applications requiring stable DC power.

Key Features:

  • DIN Rail Mountable: Easy installation on standard DIN rails (TS357.5 or TS35/15).
  • Wide Input Voltage Range: Supports a broad range of AC input voltages.
  • Multiple Output Voltages: Available in 5V, 12V, 15V, and 24V DC outputs.
  • Compact Design: Small volume saves space in control cabinets.
  • Protections: Built-in overload, overvoltage, and short-circuit protections ensure reliable operation and safety.
  • DC OK Indicator: Visual LED indicator for output status.
  • Adjustable Output: Fine-tuning of output voltage via an adjustment potentiometer (ADJ).
LCTC DR-15-24 Power Supply
Figure 2: LCTC DR-15-24 Model.

This image shows a specific model, DR-15-24, highlighting its compact form factor and labeling.

4. Setup and Installation

4.1. Dimensions

Ensure sufficient space for installation and ventilation. Dimensions for each series are provided below:

  • DR-15 Series: 93mm (L) x 56mm (H) x 25mm (W)
  • DR-60 Series: 78mm (L) x 56mm (H) x 93mm (W)
  • DR-100 Series: 100mm (L) x 56mm (H) x 93mm (W)
DR-15 Series Dimensions
Figure 3: DR-15 Series Dimensions.

Detailed view of the DR-15 series power supply with its length (3.66in/93mm), height (2.2in/56mm), and width (0.98in/25mm) indicated.

DR-60 Series Dimensions
Figure 4: DR-60 Series Dimensions.

Detailed view of the DR-60 series power supply with its length (3.07in/78mm), height (2.2in/56mm), and width (3.66in/93mm) indicated.

DR-100 Series Dimensions
Figure 5: DR-100 Series Dimensions.

Detailed view of the DR-100 series power supply with its length (3.94in/100mm), height (2.2in/56mm), and width (3.66in/93mm) indicated.

4.2. DIN Rail Mounting

The power supply is designed for quick and secure mounting on standard DIN rails (TS357.5 or TS35/15).

  1. Align the top groove of the power supply with the DIN rail.
  2. Push the bottom of the power supply firmly until it clicks into place on the rail.
  3. Ensure the unit is securely fastened and does not wobble.
DIN Rail Mounting Example
Figure 6: DIN Rail Mounting Example.

This image illustrates how the power supplies are mounted onto a standard DIN rail, showing the secure clip mechanism.

4.3. Wiring Connections

Refer to the terminal pin definitions for correct wiring. Always ensure power is off before making any connections.

DR-60 Series Terminal Pin Definition:

Pin NumberPin FunctionPin NumberPin Function
1AC/N5, 6-V
2AC/L7LED
3, 4+V8+V ADJ.

DR-100 Series Terminal Pin Definition:

Pin NumberPin FunctionPin NumberPin Function
1AC/L(+)5, 6-V
2AC/N(-)7LED
3, 4+V8+V ADJ.

Note: DR-15 series typically follows a similar terminal layout, with L and N for AC input, and +V, -V for DC output, along with an ADJ potentiometer. Always refer to the markings on the specific unit.

5. Operating Instructions

5.1. Power On/Off

  1. Ensure all wiring is correct and secure before applying power.
  2. Connect the AC input (L and N terminals) to your mains supply.
  3. Connect your DC load to the +V and -V terminals.
  4. Turn on the AC input power. The DC OK LED indicator should illuminate, indicating normal operation.
  5. To turn off, disconnect the AC input power.

5.2. Output Voltage Adjustment

Each power supply unit is equipped with an

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.