ICYYGO IC-5V

Contents

ICYYGO LED Light Board User Manual

Product Name: LED Light Board

Brand: ICYYGO

Model: IC-5V

1. Introduction

This product is a high-power LED lamp bead chip designed for various lighting scenarios. It features high brightness, low energy consumption, and a long lifespan. The LED light board is powered via USB and is available in multiple single colors.

Multiple ICYYGO LED Light Boards and a USB cable with an on/off switch.
Overview of the ICYYGO LED Light Board with USB cable and switch.

2. Safety Information and Warnings

  • Adult Supervision: This product must be used under direct adult supervision.
  • No Self-Disassembly: Unauthorized personnel are not allowed to attempt self-repair. Disassembly is prohibited.
  • Environmental Conditions: Do not use this product in humid or high-temperature environments.
  • Eye Protection: Avoid direct eye exposure to the LED beam.
  • Power Disconnection: Always cut off the power supply before installation or maintenance to prevent electric shock.
  • Voltage Warning: This lamp board is not allowed to directly connect to 220V household electricity. Doing so will burn out the lamp board and may cause electric shock. It can only connect to a 5V input voltage, such as a 5V USB switching wire or a charging power source.

3. Setup and Installation Instructions

  1. Preparation: Ensure that the power supply voltage meets the product requirements (DC 5V).
  2. Power Disconnection: Before any installation work, make sure the connected power supply is disconnected.
  3. Fixed Position: Install the LED lamp beads firmly in the appropriate position.
  4. Connect Power: Once securely installed, connect the USB cable to a compatible 5V USB power source.
LED board with USB cable and switch, showing wiring connection.
Example of LED board connected to a USB cable with switch.
LED board with USB cable, labeled 'USB Soldering Wire'.
USB cable connection for the LED board.

Compatible Power Sources:

Various USB power sources including portable battery, USB socket, power plug, car USB, and notebook.
The LED board can be powered by various 5V USB sources.

4. Operating Instructions

Once the LED light board is properly installed and connected to a 5V USB power source, it can be operated using the inline switch on the USB cable.

  • Power On/Off: Use the 'on/off' button on the switch to turn the light board on or off.
  • Dimming (if applicable): If your model includes dimmable functionality (indicated by a switch wire with dimmable controls), use the brightness adjustment buttons (up/down arrows or light bulb icon) on the inline switch to adjust the light intensity.
USB cable with a simple on/off switch.
Standard USB cable with on/off switch.
USB cable with an on/off switch and dimmable controls.
USB cable with dimmable switch controls.

Video demonstrating the LED light board being turned on and off with the switch.

5. Maintenance

  • Cleaning: Ensure the light board is disconnected from power before cleaning. Use a soft, dry cloth to gently wipe the surface. Do not use liquid cleaners.
  • Storage: When not in use for extended periods, store the light board in a dry, cool place away from direct sunlight and extreme temperatures.
  • Extend Service Life: Avoid frequent switching of the light to extend its service life.

6. Troubleshooting (FAQs)

Fault Phenomenon Possible Causes Solutions
Light does not light up/flashes The power is not connected or the contact is poor Check the power supply and connecting cable
Overheating Poor heat dissipation Improve the ventilation conditions of the installation location
Uneven illumination Improper angle of lamp beads Adjust the angle or replace accessories

7. Specifications

Feature Detail
Model Number IC-5V
Item Type BALL (LED Light Board)
Size Diameter (D) = 31MM, Inner Diameter (ID) = 10MM
Power 3W
Voltage 5V
Output Voltage 5V
Current 300MA
Light Source LED light source (5730 SMD)
Light Color Options Warm White, Pure White, Yellow, Blue, Green, Purple, Red, Natural White, White Light
Socket Type USB
Electric Wire Switch wire, Dimmable (depending on model)
Certification CCC
Origin Mainland China

For more detailed information, you may refer to the official user manual PDF: ICYYGO LED Light Board User Manual (PDF)

Collage of various light colors emitted by the LED board.
Available light colors and their appearance.
Diagram showing the 31mm diameter and 10mm inner diameter of the LED board, specifically for the Red light variant.
Dimensions of the LED Light Board (Red variant shown).

8. User Tips

  • Users have noted the excellent quality and strong illumination of this product.
  • The various color options are appreciated for their aesthetic appeal and ability to enhance different environments.
  • Consider using this light board for ambient lighting in living rooms, bedrooms, or for decorative purposes at parties and events.

9. Warranty and Support

  • Warranty Period: The product comes with a one-year warranty. Defects caused by non-human factors within this period are eligible for replacement or refund.
  • Customer Support: For any issues or inquiries, please contact ICYYGO brand customer service.

© 2024 ICYYGO. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.