LAUNCH CRP129E V2.0

Contents

LAUNCH CRP129E V2.0 OBD2 Car Diagnostic Scanner

User Instruction Manual

1. Introduction

The LAUNCH Creader Professional 129E V2.0 is an advanced diagnostic solution designed for passenger vehicles. It incorporates LAUNCH's cutting-edge diagnostic technology, offering broad vehicle coverage, powerful functions, and precise test results. This tool is ideal for both seasoned professionals and beginners.

Key features include:

  • Smart (Auto-Detect) Diagnosis: Automatically detects vehicle information and generates a diagnostic report upon connection.
  • Manual Diagnosis: Provides options for Version Information, Read DTCs, Clear DTCs, and Read Data Stream (Value, Graph, Merged modes).
  • OBD II Diagnosis: Supports 10 modes of OBD II tests, including EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing.
  • One-click Update: Allows online updates for diagnostic software and APK.
  • Diagnostic History: Quick access to previously tested vehicles and reports.
  • Diagnostic Feedback: Option to submit vehicle issues for analysis and troubleshooting.
  • DTC Library: Provides definitions for diagnostic trouble codes.
  • Battery Voltage Display: Shows real-time battery voltage when connected.

2. Safety Information

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

  • Vehicle Safety: Always perform automotive testing in a safe environment. Do not operate the tool while driving. Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot parts of the engine.
  • Electrical Safety: Do not connect or disconnect any test equipment with the ignition on or engine running, unless instructed to do so. This can damage the diagnostic tool or the vehicle's electronic systems.
  • Battery Safety: The tool contains a lithium-ion battery. Do not expose it to high temperatures or disassemble it. Dispose of batteries according to local regulations.
  • General Precautions: Keep the tool dry, clean, and free from oil, water, and grease. Use only specified attachments/accessories.

3. Product Overview

3.1 Outline of Creader Professional 129E V2.0

The device features a robust design with a 5-inch touchscreen display.

LAUNCH CRP129E V2.0 device with carrying bag

Figure 3-1: LAUNCH CRP129E V2.0 Diagnostic Tool

No.NameDescription
1Charging LEDRed indicates charging, Green indicates fully charged.
2LCD5-inch Touch Screen Display for test results and navigation.
35V Charging portConnects to external DC power for charging.
4DB-15 diagnostic connectorConnects to vehicle's DLC (Data Link Connector) via diagnostic cable.
5Power ButtonPress for ~5s to turn on/off. Short press to activate/deactivate LCD.

3.2 Accessories Checklist

The package includes the following items:

  • Creader Professional 129E V2.0 Handset
  • OBD II Diagnostic Cable
  • DC 5V Charging Cable
  • User Manual
  • Carrying Bag
Contents of the LAUNCH CRP129E V2.0 package

Figure 3-2: Package Contents

4. Specifications

FeatureSpecification
Screen5-inch Touch Screen Display (720P)
Operating SystemAndroid 8.1
RAM + Memory2GB + 32GB
Battery3.7V / 6100mAh
OBD II Input Voltage Range9~18V
Charging ViaDC 5V charging cable or Diagnostic cable (via DLC)
ConnectivityWi-Fi
Dimensions228mm x 125mm x 34.5mm
Working Temperature-10°C to 50°C (14°F to 122°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Supported LanguagesEnglish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Traditional Chinese
Software UpdateLifetime Free Update via Wi-Fi
LAUNCH CRP129E V2.0 parameters and dimensions

Figure 4-1: Device Specifications

5. Setup

5.1 Charging the Tool

There are two methods to charge your CRP129E V2.0:

  • Via Charging Cable: Plug one end of the included DC 5V charging cable into the tool's DC-IN port and the other end into an external DC power source.
  • Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool and the other end into the vehicle's DLC.

The Charging LED will illuminate red during charging and turn solid green when the battery is fully charged.

5.2 Getting Started (Initial Use)

If this is your first time using the tool, you will need to perform some initial system settings:

  1. Press the [Power] button to turn on the device.
  2. The screen will display a welcome page. Tap
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.