ZEALOT S61M

Contents

ZEALOT-S61M Karaoke Machine Portable Bluetooth Speaker System User Manual

Model: S61M

Introduction

Thank you for purchasing the ZEALOT-S61M Portable Bluetooth Speaker System. This manual provides important information for the correct use, operation, and maintenance of your device. Please read it thoroughly before use and keep it for future reference.

ZEALOT-S61M Karaoke Machine and Wireless Microphone

Image: The ZEALOT-S61M speaker and wireless microphone, highlighting its high-definition audio capabilities for professional karaoke.

Package Contents

Ensure all items are present in the package:

  • ZEALOT-S61M Wireless Speaker
  • Wireless Microphone (1 or 2, depending on variant)
  • USB-C Charging Cable
  • User Manual (this document)
ZEALOT-S61M Speaker and Microphone

Image: ZEALOT-S61M speaker and wireless microphone, showing the main components.

Important Safety Warnings

To ensure correct use and trouble-free operation, please observe the following safety precautions:

  • For the first use, it is recommended to fully charge the device.
  • Use and store the product at room temperature.
  • Do not expose the product to fire, high temperatures, direct sunlight, or similar overheating conditions.
  • Keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
  • Do not use organic solvents or other chemicals to clean the product.
  • Prevent small particles from entering the product.
  • Do not disassemble the product or make any modifications to its structure or any part thereof.
  • If the battery is not replaced correctly, there is a risk of explosion. Only the same type of battery can be replaced.
  • Do not throw or drop the product to avoid damage.

Setup Guide

1. Charging the Speaker

Before first use, fully charge the speaker using the provided USB-C cable.

  1. Connect the USB-C cable to the charging port on the speaker.
  2. Connect the other end of the USB-C cable to a DC 5V power source (e.g., USB wall adapter, computer USB port).
  3. The charging indicator will show the charging status.
ZEALOT-S61M Speaker Internal Structure

Image: Diagram showing the internal three-unit sound structure of the speaker, designed to restore original sound quality.

2. Powering On/Off

  • Speaker: Long press the power button (marked with a power symbol) for more than 2 seconds to turn the speaker ON or OFF.
  • Wireless Microphone: Long press the power button on the microphone for more than 2 seconds to turn it ON or OFF.

3. Bluetooth Connection

The speaker uses Bluetooth 5.2 for wireless communication.

  1. Turn on the ZEALOT-S61M speaker. It will automatically enter Bluetooth pairing mode.
  2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
  3. Select "ZEALOT-S61M" from the list of devices to pair.
  4. Once connected, the speaker will indicate a successful pairing.

Operating Instructions

Speaker Functions

  • Power Button: Long press (>2s) for ON/OFF.
  • Mode Switch Button: Short press to cycle through input modes: Wireless (Bluetooth), TF Card, USB, AUX.
  • Play/Pause Button: Short press to play or pause audio.
  • Volume Up/Next Track: Short press for volume up, long press for next track.
  • Volume Down/Previous Track: Short press for volume down, long press for previous track.
  • Light Button: Short press to cycle through lighting modes (e.g., constant light, rhythmic light, off).

Wireless Microphone Functions

  • Power Button: Long press (>2s) for ON/OFF.
  • Mode Switch Button (Mic Icon): Short press to cycle through voice effects: Professional mode, Female voice, Male voice, Original singing.
  • Play Control Button (Musical Note Icon): Short press for play/pause (when connected to a device).
  • Light Button: Short press to switch lighting modes on the microphone.
  • Party Add Button: Double press to initiate Party Connect mode with another ZEALOT-S61M speaker.
ZEALOT-S61M Speaker and Microphone with controls

Image: ZEALOT-S61M speaker and microphone, illustrating the performance-grade wireless microphone.

Party Connect (TWS Pairing)

To connect two ZEALOT-S61M speakers for a stereo experience:

  1. Ensure both speakers are turned on and not connected to any other Bluetooth device.
  2. On one speaker, double press the "Party Add" button. It will enter TWS pairing mode.
  3. The speakers will automatically connect to each other.
  4. Once paired, connect your device to one of the speakers via Bluetooth. Both speakers will then play audio in stereo.
Two ZEALOT-S61M speakers paired for stereo sound

Image: Two ZEALOT-S61M speakers set up for stereo pairing, demonstrating double sensory impact for a cinema-quality experience.

Maintenance

  • Clean the speaker and microphone with a soft, dry cloth.
  • Do not use abrasive cleaners, organic solvents, or other chemicals.
  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • If not used for an extended period, charge the battery periodically to maintain its lifespan.

Troubleshooting

ProblemPossible CauseSolution
Speaker does not turn on.Low battery.Charge the speaker fully.
Cannot connect via Bluetooth.Speaker not in pairing mode; device Bluetooth off; too far from speaker.Ensure speaker is on and in pairing mode. Turn device Bluetooth off/on. Move device closer to speaker (within 10m).
No sound from microphone.Microphone off; low battery; not paired with speaker.Turn on microphone. Charge microphone. Ensure microphone is paired with speaker.
Echo effect on microphone cannot be turned off.Voice effect mode is active.Short press the "Mode Switch" button on the microphone repeatedly to cycle through voice effects (Professional mode, Female voice, Male voice, Original singing). The "Original singing" mode should minimize or remove the echo.
Poor sound quality.Low battery; interference; source audio quality.Charge devices. Move away from other electronic devices. Use high-quality audio files.

Technical Specifications

FeatureSpecification
ModelS61M
Wireless VersionBluetooth 5.2
Charging VoltageDC 5V
Working Voltage3.7V
Transmission Distance10m
Frequency Range20Hz-20KHz
Speaker UnitΦ66mm*1
Signal-to-Noise Ratio (SNR)≥85dB
Distortion1%
Weight670g
Dimensions (L x W x H)98 x 98 x 163mm
Battery Capacity (Speaker)3600 mAh
Input Power<25 W
Impedance2 Ohm
PMPO (Peak Music Power Output)10 W
Channels2 (2.0)
Audio CrossoverFull-Range
Cabinet MaterialPlastic
CertificationCE

Note: Some marketing materials may indicate a 4400 mAh battery capacity for the speaker.

User Tips

  • Microphone Echo Control: If you experience an unwanted echo effect on the microphone, repeatedly press the "Mode Switch" button on the microphone. This cycles through various voice effects, including "Original singing" mode, which should provide a cleaner vocal output.
  • Optimal Sound: For the best audio experience, ensure the speaker is placed on a stable surface and avoid obstructions. The HiFi sound quality aims for a cinema-quality experience.
  • Battery Life: To maximize battery life, fully charge the speaker and microphone before each use, especially for extended karaoke sessions or travel. The high-capacity battery is designed for worry-free traveling.
  • Stereo Pairing: Utilize the Party Connect (TWS) feature to pair two S61M speakers for a more immersive stereo sound experience, doubling the sensory impact.
ZEALOT-S61M Speaker and Microphone with 4400 mAh battery capacity

Image: ZEALOT-S61M speaker and microphone outdoors, highlighting the high-capacity battery for worry-free traveling.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact ZEALOT customer service directly.

A PDF version of the user manual is available for download: Download User Manual (PDF)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.