Dareu EK106Pro

Contents

Dareu EK106Pro 8K Wired Mechanical Keyboard User Manual

Model: EK106Pro

1. Introduction

Thank you for choosing the Dareu EK106Pro 8K Wired Mechanical Keyboard. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new keyboard. Please read it thoroughly to ensure optimal performance and longevity of your device.

Dareu EK106Pro Black Keyboard

Figure 1: Dareu EK106Pro 8K Wired Mechanical Keyboard (Black)

2. Package Contents

  • Dareu EK106Pro 8K Wired Mechanical Keyboard
  • Detachable USB Type-C Cable
  • User Manual (this document)
  • Keycap Puller (may be included depending on region/bundle)
  • Switch Puller (may be included depending on region/bundle)

3. Setup Guide

3.1 Connecting the Keyboard

  1. Unpack the keyboard and the USB Type-C cable from the box.
  2. Connect the USB Type-C end of the cable to the port on the back of the keyboard.
  3. Connect the USB Type-A end of the cable to an available USB port on your computer.
  4. Your computer should automatically detect and install the necessary drivers. No additional software is required for basic functionality.

3.2 Adjusting Keyboard Height

The EK106Pro features two-stage adjustable feet on the underside. Flip out the desired stage of feet to adjust the typing angle for your comfort.

4. Operating Instructions

4.1 Basic Functions

  • Typing: Use the standard QWERTY layout for text input.
  • Numeric Keypad: The dedicated numeric keypad on the right provides easy access to numbers and arithmetic operations. Ensure 'Num Lock' is active.

4.2 Multimedia Knob

The rotary knob located on the top right of the keyboard controls multimedia functions:

  • Rotate: Turn clockwise to increase volume, counter-clockwise to decrease volume.
  • Press: Press the knob to mute/unmute audio.

4.3 Backlighting Control

The EK106Pro features RGB backlighting. Specific key combinations (usually Fn + arrow keys or Fn + Ins/Home/PgUp/Del/End/PgDn) are used to change lighting modes, brightness, and speed. Refer to the keyboard's keycap legends or the official software for detailed controls.

4.4 Hot-Swappable Switches

The EK106Pro supports hot-swappable switches, allowing you to change mechanical switches without soldering. It is compatible with most 3-pin and 5-pin mechanical switches.

  1. Removing a Keycap: Use the included keycap puller to gently pull the keycap straight up.
  2. Removing a Switch: Use the included switch puller to grasp the top and bottom clips of the switch and pull it straight up.
  3. Installing a New Switch: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure pins are not bent.
  4. Installing a Keycap: Place the keycap over the switch stem and press down firmly.

5. Maintenance

5.1 Cleaning the Keyboard

  • General Cleaning: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface of the keyboard.
  • Dust Removal: Use compressed air to blow away dust and debris from between the keycaps.
  • Deep Cleaning: For thorough cleaning, remove keycaps using a keycap puller. Clean the keycaps with mild soap and water, then dry them completely before reattaching. Clean the keyboard plate with a soft brush or cloth.

5.2 Storage

When not in use for extended periods, store the keyboard in a dry, cool place away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • Keyboard Not Responding:
    • Check if the USB cable is securely connected to both the keyboard and the computer.
    • Try connecting the keyboard to a different USB port on your computer.
    • Test the keyboard on another computer to rule out a computer-specific issue.
    • Restart your computer.
  • Specific Keys Not Working:
    • If the keyboard is hot-swappable, carefully remove the keycap and switch for the non-working key. Re-seat the switch firmly, ensuring its pins are straight and properly aligned.
    • Try swapping the problematic switch with a known working switch from another less-used key to identify if the switch itself is faulty.
  • Backlighting Issues:
    • Ensure backlighting is not turned off or set to minimum brightness. Adjust using the designated key combinations.
    • If using software, check lighting settings within the software.

7. Specifications

Detailed features and specifications of Dareu EK106Pro keyboard

Figure 2: Dareu EK106Pro Key Features and Specifications

FeatureDescription
ModelEK106Pro
Layout106-key Full-size
ConnectivityWired (USB Type-C detachable cable)
Polling Rate8000Hz (8K)
SwitchesHot-swappable (3-pin/5-pin compatible)
KeycapsPBT
Anti-GhostingFull-key N-Key Rollover
BacklightingRGB
Multimedia ControlRotary Volume Knob
Adjustable Feet2-stage
Dimensions (L x W x H)440mm x 135mm x 35mm
WeightApprox. 1100g
Cable Length1.8m
MaterialABS (case)

7.1 Switch Specifications (Example: Cloudaxis)

Cloudaxis Switch Specifications

Figure 3: Cloudaxis Switch Specifications

ParameterCloudaxis (Linear)
Switch TypeLinear
Total Travel3.4 ± 0.4mm
Operating Force42 ± 5gf
Pre-Travel2.0 ± 0.4mm
Lifespan50 Million Keystrokes

7.2 Switch Specifications (Example: Silent Mustard)

Silent Mustard Switch Specifications

Figure 4: Silent Mustard Switch Specifications

ParameterSilent Mustard (Silent Linear)
Switch TypeSilent Linear
Total Travel3.9 ± 0.2mm
Operating Force40 ± 5gf
Pre-Travel2.0 ± 0.4mm
Lifespan80 Million Keystrokes

7.3 Available Colors and Keycap Engraving

Dareu EK106Pro Color Options and Keycap Engraving Types

Figure 5: Available Color Options and Keycap Engraving Styles

  • White: Front engraving (Korean/English), RGB non-transmissive keycaps.
  • Black: Front engraving (Korean/English), RGB non-transmissive keycaps.
  • Gray Black: Front engraving (Korean/English), RGB non-transmissive keycaps.
  • Smoky Gray: Side engraving (English only), RGB transmissive keycaps.

8. User Tips

  • Quiet Operation: Many users appreciate the low-noise switches, making this keyboard suitable for office environments or shared spaces.
  • Key Feel: The keyboard is noted for its good key feel, offering a satisfying typing experience.
  • Wired Convenience: As a wired keyboard, it eliminates concerns about battery life and charging, ensuring consistent performance.
  • Value for Money: Users often highlight the excellent cost-performance ratio, combining design and functionality.

9. Warranty and Support

Dareu products come with a limited warranty. Please refer to the warranty card included with your product or visit the official Dareu website for detailed warranty terms and conditions specific to your region.

9.1 Customer Support

For technical assistance, software downloads, or frequently asked questions, please visit the official Dareu Korea website: www.dareu.co.kr.

Dareu Customer Support QR Codes for Software, Q&A, and Real-time Chat

Figure 6: Customer Support Information (QR codes for software, Q&A, and real-time chat)

You may find resources for software downloads, Q&A forums, and real-time chat support on the official website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.