Introduction
This manual provides essential instructions for the safe operation and maintenance of your COTAUL E99 Pro K3 Drone Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper usage and to prevent damage or injury.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | COTAUL |
| Drone Weight | 120g |
| Max Takeoff Weight | <1kg |
| Max Flight Time | 12 min |
| Flight Time | 12min |
| Remote Distance | 100m |
| Motor Type | Brush Motor |
| Control Channels | 4 channels |
| Connectivity | APP Controller |
| Aircraf Operating Frequency | 2.4 GHz |
| Video Maximum Resolution | 4K (4096*2160) |
| Video Format | MP4 |
| Fps | 24*fps |
| Camera Features | 4K HD Video Recording |
| Camera Integration | Camera Included |
| Camera Mount Type | Other |
| Camera Stabilization | None |
| Sensor Size | 1/1.28 Inches |
| Optical Zoom | 10x and below |
| Aerial Photography | Yes |
| GPS | No |
| Obstacle avoidance types | No support |
| Integrated propeller guard | Not Include |
| Max Wind Speed Resistance | < 10 KM/H |
| Removable/Replaceable Battery | Yes |
| Remote Controller Battery Capacity | 3*AA (not included) |
| APP Supported Languages | English |
| Recommended age | 14+Y |
| Certification | CE |
Setup
1. Remote Control Overview
The remote control features:
- Headless Mode: Activates headless flight.
- Gyro Calibration: Calibrates the drone's gyroscope.
- Speed Switch: Adjusts flight speed (3 gears).
- Rolling: Initiates 360° rolling stunts.
- Left-side Fine-tuning: Adjusts left drift.
- Right-side Fine-tuning: Adjusts right drift.
- Rise: Increases altitude.
- Descent: Decreases altitude.
- Forward Fine-tuning: Adjusts forward drift.
- Backward Fine-tuning: Adjusts backward drift.
- Throttle Lever (Left Rocker): Controls altitude and rotation.
- Direction Control Lever (Right Rocker): Controls forward, backward, left, and right movement.
- Power Switch: Turns the remote control on/off.
- Phone Clamp: Holds a mobile phone for FPV viewing and app control.
2. Mobile Phone Rack Installation
Pull out the mobile phone handle on the remote control and securely clamp your mobile phone into place.
3. Aircraft Folding Function
The drone features a foldable design for portability. To fold or unfold, gently manipulate the arms as shown in the diagram.
4. Installation of Aircraft Blades
Ensure propellers are installed in the correct direction. Match the propeller with the corresponding mark (A/B) on the drone's support arm and secure with screws.
5. Remote Control Battery Installation
Install 3 AA batteries (not included) into the remote control, ensuring correct polarity (+,-) as indicated in the battery box.
6. Aircraft Battery Charging
- Remove the battery from the aircraft.
- Connect the battery to the specific charging cable.
- Insert the charging cable into a charging device, such as a computer USB port.
- The indicator light will be on during charging and turn off upon completion.
The charging time is approximately 60 minutes.
7. Aircraft Battery Installation and Startup
Insert the fully charged battery into the drone's battery slot. Press and hold the power switch until the drone's lights illuminate.
8. 2.4G Frequency Alignment
- Turn on the drone's power switch and place it on a flat surface. The indicator will flash.
- Turn on the remote control's power switch.
- Push the throttle lever (left rocker) to its highest position for 1 second, then pull it to the lowest position.
- A 'Di' sound will be heard, and the drone's indicator will light up continuously, signifying successful frequency matching. The drone is now ready for flight.
Note: This alignment must be completed before flight.
Operating Instructions
1. One-Button Take-off and Landing
This product uses a barometer for altitude hold. Due to environmental factors, slight altitude changes at the start of flight or at low voltage are normal.
After frequency alignment, press the one-button take-off/landing button on the remote control to initiate take-off or landing.
2. Flight Control
Use the remote control levers to maneuver the drone:
- Throttle (Left Rocker):
- Push up: Increase altitude.
- Pull down: Decrease altitude.
- Push left/right: Rotate drone left/right.
- Direction Control (Right Rocker):
- Push up: Fly forward.
- Pull down: Fly backward.
- Push left: Fly left.
- Push right: Fly right.
3. Horizontal Calibration
If the drone cannot ascend vertically during take-off, perform horizontal calibration:
- Place the drone on a stable, horizontal surface.
- Press the 'One Key Correction' button on the remote control.
- The drone's indicator lights will flash rapidly, then remain solid, indicating calibration is complete.
4. Fine-tuning Operations
If the drone drifts in a certain direction or rotates in place, use the fine-tuning buttons to adjust its flight stability:
- If drifting forward/backward, use the forward/backward fine-tuning buttons.
- If drifting left/right, use the left-side/right-side fine-tuning buttons.
- If rotating left/right, use the rotation fine-tuning buttons.
5. Speed Switch
The drone has three speed gears for forward, backward, and side flight. It defaults to Gear 1 upon power-on. Press the Speed Switch button:
- Two 'Di' sounds: Gear 2.
- Three 'Di' sounds: Gear 3.
- One 'Di' sound: Return to Gear 1.
6. 360° Rolling
- Press the 360° rolling button on the remote control. The remote will emit a continuous 'di-di-di' sound.
- Push the right rocker in the desired direction. The drone will perform a 360° roll in that direction.
Caution: The 360° rolling function is automatically disabled when the drone's battery is low.
7. Headless Mode
In Headless Mode, the drone's orientation is relative to the remote control, not its own front/back. The direction the drone is facing when 2.4G frequency alignment is completed becomes its 'forward' direction.
- Before Take-off: Position the drone with its camera-side facing directly away from you. Complete the 2.4G frequency alignment to define this as the forward direction for Headless Mode.
- During Flight: Press the Headless Mode button. The remote control will make a continuous sound, and the drone's lights will flash rapidly. Press the button again to exit Headless Mode (remote will make a 'di' sound).
Important: Before entering Headless Mode, ensure the drone's initial forward direction is correctly set on the ground after startup.
Maintenance
- Battery Care: Always ensure batteries are fully charged before use, especially for new products. Store batteries in a cool, dry place.
- Propeller Inspection: Regularly check propellers for deformation or damage. Replace any damaged propellers immediately to ensure stable flight.
- Cleaning: Keep the drone and remote control clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: When not in use for extended periods, remove batteries from both the drone and remote control. Store the drone in its carrying bag or a safe place to prevent damage.
Troubleshooting
| Problem | Cause | Treatment Mode |
|---|---|---|
| Drone indicator light flashes continuously after battery connection, operation is unresponsive. | Aircraft and remote controller 2.4G frequency alignment unsuccessful. | Re-perform 2.4G alignment between aircraft and remote control. |
| No reaction after connecting the battery. |
|
|
| When pushing the throttle lever, the motor does not rotate, and the drone's indicator light flashes. | Aircraft battery is low. | Charge the battery or replace with a fully charged battery. |
| Drone propeller rotates continuously but cannot take off. |
|
|
| The aircraft vibrates badly. | Propeller deformation. | Change propeller. |
| The aircraft always drifts in one direction. | The gyroscope's center point on the aircraft is incorrect. | Re-calibrate horizontally or reboot, then re-align frequency. |
| The aircraft lost its balance after falling. | The gyroscope's center point on the aircraft is incorrect. | Re-calibrate horizontally or reboot, then re-align frequency. |
Note: Newly purchased products often have low voltage batteries. Please fully charge the batteries before first use!
User Tips
- Always perform frequency alignment on a flat surface to ensure accurate gyroscope calibration and stable flight.
- For optimal flight stability, especially for beginners, practice in an open area free from obstacles and strong winds.
- Monitor battery levels closely. Low battery can affect flight performance and disable certain features like 360° rolling.
- When using Headless Mode, remember the initial orientation you set. This is crucial for intuitive control.
- Regularly check propellers for any signs of wear or damage. Even minor damage can significantly impact flight.
Warranty and Support
For detailed item guides and documents, including a PDF user manual, please refer to the official product page or contact customer support. The PDF manual can be accessed via the following link: User manual (PDF).
Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.