Dragonhawk X3 Full Kit Wireless Tattoo Pen Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Dragonhawk X3 Full Kit Wireless Tattoo Pen. Please read this manual thoroughly before operating the device and keep it for future reference.

Safety Precautions

• Store the machine in a cool, dry place, away from children.
• Batteries, electronic equipment, and electrical equipment boxes should not be disposed of with household waste. Follow local regulations for proper disposal.
• This product is designed to operate at a maximum ambient temperature of 40°C (104°F) and at an altitude of 2000 meters above sea level.
• Always ensure proper hygiene and sterilization practices when using tattoo equipment.
• Use only compatible and sterile cartridge needles.

Package Contents

The Dragonhawk X3 Full Kit includes the following items:

• Dragonhawk X3 Wireless Tattoo Pen
• 2 x 1500mAh Wireless Batteries
• 20 x Z Series Cartridge Needles (1003RL)
• Triple Black Tattoo Pigment (5ml)
• Type-C Charging Cable
• RCA Cord (for wired operation, if applicable)
• Self-adhesive bandage
• Practice skin
• Ink cups
• Gloves
• Dragonhawk wristband

Product Overview

Familiarize yourself with the components of your Dragonhawk X3 Tattoo Pen:

1. Function Module: Contains the start/stop button and voltage adjustment controls. The screen displays voltage and battery level.
2. Type-C Charging Port: Used to charge the wireless battery module.
3. Battery Compartment: Houses the removable wireless battery.
4. Motor Compartment: Contains the motor for the tattoo pen.
5. Grip: Rotates to adjust the needle length.
6. Cartridge Interface: The round port where the cartridge needle is inserted and tightened clockwise.

Specifications

Setup

1. Attaching the Wireless Battery Module

1. Ensure the tattoo pen (main body) and the wireless battery module are clean.
2. Align the battery module with the motor compartment (D) of the tattoo pen.
3. Gently twist the battery module clockwise until it is securely attached.

2. Inserting the Cartridge Needle

1. Select a sterile cartridge needle. The kit includes 1003RL needles.
2. Insert the cartridge needle into the round port of the cartridge interface (F).
3. Twist the cartridge clockwise until it is firmly secured.

The kit includes Dragonhawk Z Series Cartridge Needles, which are individually packaged and sterilized with Ethylene oxide for single-use safety.

3. Wired Operation (Optional)

If you prefer wired operation or if the wireless battery is depleted, you can use the provided RCA cord:

1. Remove the wireless battery module.
2. Connect the RCA cord to the motor compartment (D) of the tattoo pen.
3. Connect the other end of the RCA cord to a compatible power supply (not included in this kit).

Operating Instructions

1. Power On/Off and Mode Selection

• Long Press (Shutdown State): Press and hold the power button on the function module (A) to turn the device on or off. This enters normal start mode.
• Double-Click (Shutdown State): Double-click the power button to enter instant startup mode.
• Click (Power On State): Click the power button once to start or pause operation.

2. Adjusting Voltage

• Use the "-" button on the function module (A) to decrease the voltage.
• Use the "+" button on the function module (A) to increase the voltage.
• The current voltage and battery level are displayed on the screen.

3. Adjusting Needle Length (Stroke)

Rotate the grip (E) of the tattoo pen to adjust the desired needle length for your tattooing needs.

4. Charging the Battery

• Connect the Type-C charging cable to the Type-C charging port (B) on the wireless battery module.
• Connect the other end of the cable to a suitable USB power adapter (not included).
• The battery indicator on the screen will show charging status. A full charge takes approximately 2-3 hours.

5. Operation Demonstration Video

Watch this video for a visual guide on assembling and operating your Dragonhawk X3 Tattoo Pen:

Maintenance

• Cleaning: After each use, carefully clean the exterior of the tattoo pen with a suitable disinfectant wipe. Do not immerse the device in liquid.
• Sterilization: Ensure all components that come into contact with skin or ink (e.g., cartridge needles) are single-use and properly disposed of after use.
• Storage: Store the machine in a clean, dry, and cool environment, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the batteries frequently. Charge them regularly, even if not in use for extended periods.

Troubleshooting

User Tips

• For optimal performance and to avoid running out of specific needle types, consider purchasing additional cartridge needles of various sizes beyond what is included in the kit.
• The moderate needle stroke (3.5mm) is ideal for beginners, providing a balance for precise lines and stable shading.
• With two wireless batteries, you can seamlessly switch them out to ensure continuous operation during longer sessions, minimizing downtime.

Frequently Asked Questions (FAQ)

Q: Does the kit include everything shown in the image?

A: Yes, the kit is designed to be complete for beginners, including the tattoo pen, two batteries, 20 cartridge needles, ink, and various accessories as depicted.

Q: Does the product come in an original box?

A: The product is typically packaged in its original manufacturer's box. For specific packaging details, please refer to the product listing or contact customer service.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your Dragonhawk X3 Tattoo Pen, please refer to the official Dragonhawk website or contact the seller directly.

An additional user manual in PDF format is available for download. You can find it at the following link: Dragonhawk X3 User Manual (PDF).