1. Introduction
This manual provides instructions for the proper installation, use, and maintenance of your AUTOXBERT Headlight Water Spray Washer Nozzle Cover Caps. These covers are designed to protect the headlight washer nozzles on compatible BMW 3 Series E46 models from dust, debris, and corrosion, ensuring their longevity and proper function.
2. Product Information
- Product Name: Headlight Water Spray Washer Nozzle Cover Cap
- Model Numbers (OEM): 61677066847 (Left), 61677066848 (Right)
- Brand: AUTOXBERT
- Item Type: Chromium Styling (Accessory)
- Material: Plastic
- Placement on Vehicle: Front, Left/Right
- Origin: Mainland China
- External Testing Certification: ISO9001
3. Manufacturer & EU Representative Information
Manufacturer
- Name: XUKE Auto Parts Co.,Ltd
- Address: a163, block 1, 358 meilin rd, shanghai, china
- Contact: customer@autoxbert.com
EU Authorized Representative
- Name: Lefeng Technology GmbH
- Address: 2.0G, Zi.203, Beeskower Straße 4, in 15234 Frankfurt (Oder)
- Contact: lefeng.tech@outlook.com
4. Safety and Warnings
Important Safety Information
- Read Before Use: Read all instructions before installation to ensure the cover is used correctly.
- Child Safety: Warning! Keep small parts and packaging materials out of reach of children under 3 years old. Choking hazard.
- Securement: Before driving, ensure the headlight washer nozzle cover is firmly inserted and secured to prevent it from falling off.
- Inspection: Inspect the product before each use; do not use if the material is cracked, warped, or if the retention tabs are damaged.
- Intended Use: Do not use this product for purposes other than protecting the vehicle's headlight washer nozzle from dust, debris, and corrosion.
5. Setup (Installation Instructions)
Preparation
- Unpack: Remove the headlight washer nozzle covers from their packaging.
- Clean Area: Use a clean cloth to remove any dirt, mud, or debris from around the headlight washer nozzle area on your vehicle's front bumper. Ensure the area is dry before installation.
Installation Steps
- Identify Sides: Determine the Left (LH) and Right (RH) covers. Some covers may have markings (e.g., 'R' for Right).
- Alignment: Align the cover with the corresponding headlight washer nozzle opening on the bumper. The clips on the back of the cover should match the slots on the vehicle.
- Insertion: Gently but firmly press the cover into the opening until it sits flush with the bumper surface and the internal clips engage securely.
- Final Check: Give the cover a slight tug to confirm it is held securely in place. It should not wobble or easily come loose.
6. Operating
The headlight washer nozzle covers function as passive protective components. Once correctly installed, they require no active operation. Their purpose is to shield the underlying washer nozzles from environmental elements such as road grime, dust, and minor impacts, thereby maintaining the cleanliness and integrity of the washer system.
7. Maintenance & Cleaning
- Regular Check: Periodically check the covers to ensure they remain tight and securely attached, especially after long drives or car washes.
- Cleaning: Wipe the covers with a damp cloth or rinse with water during regular vehicle cleaning to remove dirt and debris. Avoid harsh chemicals that may damage the plastic finish.
- Storage: If the covers are removed for any reason, store them in a dry, clean place to prevent damage or loss.
8. Troubleshooting
- Cover Does Not Fit:
- Ensure you have the correct cover for the specific side (Left/Right) and vehicle model (BMW 3 Series E46).
- Check for any obstructions or debris in the nozzle opening on the bumper that might prevent proper seating.
- Cover Falls Off:
- Re-check the installation steps to ensure the clips are fully engaged.
- Inspect the retention clips on the back of the cover and the corresponding slots on the bumper for any damage or wear. If damaged, replacement may be necessary.
9. Specifications
| Feature | Detail |
|---|---|
| Product Type | Headlight Water Spray Washer Nozzle Cover Cap |
| Compatible Models | BMW 3 Series E46 (316, 318, 320, 323, 325, 328, 330, M3) |
| OEM Part Numbers | 61677066847 (Left), 61677066848 (Right) |
| Material | Plastic |
| Color | Black (as per product images) |
| Dimensions (Approx.) | Length: 80mm (3.15 in), Width: 30mm (1.18 in) |
| Package Contents | 2 Pieces (Left and Right covers) |
| Package Weight | 0.021 kg |
| Package Dimensions | 17 cm x 9 cm x 3 cm |
10. User Tips
- Ease of Installation: Users have noted that these covers are generally easy to apply, suggesting a straightforward installation process.
- Color Confirmation: The product is typically supplied in a black finish, matching the aesthetic of many vehicle bumpers.
11. Warranty and Support
For any questions regarding product defects, warranty claims, or technical support, please contact the manufacturer, XUKE Auto Parts Co.,Ltd, directly via email at customer@autoxbert.com.
For a general user manual that may contain additional safety and maintenance information, please refer to the PDF document available at: User Manual (PDF). Please note that this PDF is a generic document and some details may not be specific to this exact product.