ZoeRax SFP+ Copper Module

Contents

ZoeRax SFP+ Copper Module User Manual

Models: 1.25G, 2.5G, 10G GBASE-T SFP+ Copper Module to RJ45

1. Safety Information

  • Do not use for live working to prevent electric shock.
  • The blade and crimping parts are sharp, do not touch.
  • Keep fingers out of the blade and crimping die during operation.

2. Product Overview

The ZoeRax SFP+ Copper Module is a high-performance transceiver designed for reliable and stable data transmission in various networking environments. It supports multiple data rates and offers wide compatibility with mainstream network switches.

ZoeRax 10GBASE-T SFP+ Copper Module

Figure 1: ZoeRax 10GBASE-T SFP+ Copper Module (30 Meters)

ZoeRax 1000BASE-T SFP Copper Module

Figure 2: ZoeRax 1000BASE-T SFP Copper Module (100 Meters)

2.1. Key Features

  • Supports 1.25G, 2.5G, and 10G data rates (adaptive).
  • Equipped with high-quality chips for enhanced performance and longevity.
  • Durable zinc metallic casing for effective heat dissipation and reduced interference.
  • Thick gold finger connectors for enhanced corrosion resistance and stable signal connection.
  • Designed for rugged environments, operating stably from 0°C to 70°C.
  • Plug and Play functionality, requiring no additional software installation or configuration.
  • Wide compatibility with major network switch brands.
Product Features Diagram showing internal components and specifications

Figure 3: Internal Components and Key Specifications

3. Setup and Installation

The ZoeRax SFP+ Copper Module is designed for easy, plug-and-play installation without the need for complex software configuration.

3.1. Initial Inspection

  1. Inspect the product for any physical damage upon receipt.
  2. Ensure the module type (1.25G, 2.5G, or 10G) matches your network requirements.

3.2. Compatibility

The module offers wide compatibility with most mainstream switches. It is compatible with brands such as Cisco, Fortinet, Ubiquiti, Netgear, D-Link, TP-Link, Moraki, QNAP, ZYXEL, BROCADE, BROADCOM, and MikroTik.

Diagram showing wide compatibility with various network brands

Figure 4: Wide Compatibility with Network Equipment

3.3. Installation Steps

  1. Ensure your network device (switch, router, etc.) is powered off or in a safe state for module insertion.
  2. Carefully insert the SFP+ Copper Module into an available SFP+ port on your network device. Ensure it clicks securely into place.
  3. Connect a compatible RJ45 Ethernet cable (e.g., CAT6a for 10GBASE-T) to the module's RJ45 port.
  4. Connect the other end of the Ethernet cable to your desired network endpoint (e.g., server, workstation, another switch).
  5. Power on your network device. The module should be automatically detected and configured (Plug & Play).
  6. Follow any on-screen prompts or refer to your network device's manual for specific port activation or configuration if necessary.
Image demonstrating plug and play installation of the SFP+ module into a network switch

Figure 5: Easy Plug and Play Installation

4. Operating Instructions

Once installed, the ZoeRax SFP+ Copper Module will automatically negotiate the highest possible data rate with the connected device, up to its maximum supported speed.

4.1. Data Rates and Transmission Distances

  • 1.25G / 2.5G / 10G Adaptive: The module supports auto-negotiation across these speeds.
  • 10GBASE-T: Up to 30 meters using CAT6a or better cabling.
  • 1000BASE-T: Up to 100 meters using CAT5e or better cabling.

4.2. Network Diagnostics

The module is designed to work with network utility tools for rapid scanning of network status. Refer to your network device's documentation for available diagnostic features.

4.3. Video Overview and Testing

Video 1: ZoeRax SFP+ Copper Module overview, internal components, and data center testing demonstrating stable transmission and zero packet loss.

5. Maintenance

To ensure optimal performance and longevity of your ZoeRax SFP+ Copper Module, consider the following maintenance guidelines:

  • Environmental Conditions: The module is designed for rugged environments, operating stably between 0°C and 70°C (32°F to 158°F). Ensure your network equipment operates within appropriate temperature ranges to prevent overheating.
  • Physical Inspection: Periodically inspect the module and its connections for any signs of damage, corrosion, or loose connections. The durable zinc metallic casing and thick gold finger connectors are designed for anti-oxidation and stable connections.
  • Cleaning: If necessary, gently clean the exterior of the module with a soft, dry, lint-free cloth. Do not use liquid cleaners or solvents.
  • Firmware/Software Updates: Regularly check for and apply any available firmware updates for your network switch or device, as these can improve compatibility, performance, and security for connected modules.
Temperature stability chart showing operating range from 0°C to 70°C

Figure 6: Operating Temperature Range for Stability

6. Troubleshooting

6.1. Frequently Asked Questions (FAQ)

Q: Tool fails to launch?
A: Verify that the installation is complete and the module is properly seated in the SFP+ port.
Q: Unstable network connection?
A: Try restarting your router or network switch. Check the RJ45 cable for damage and ensure it meets the required specifications (e.g., CAT6a for 10G).
Q: Abnormal functionality?
A: Contact customer support for assistance.

7. Specifications

Attribute Value
Product Type SFP+ Copper Module
Brand Name ZoeRax
Model Number SFP-10GA-T, SFP-GEA-T, SFP-2.5GEA-T (depending on variant)
Form Type SFP+
Data Rate 1.25Gb/s, 2.5Gb/s, 10Gb/s (Adaptive)
Interface RJ45
Cable Distance Up to 30m (10GBASE-T), Up to 100m (1000BASE-T)
Protocols MSA Compliant
Operating Temperature 0°C to 70°C (32°F to 158°F)
Dimensions (approx.) 13.7 x 13.4 x 68.8 mm
Certifications CE, FCC, RoHS, UL, WEEE

8. User Tips

  • Always use high-quality Ethernet cables that meet or exceed the specifications for your desired speed (e.g., CAT6a for 10GBASE-T).
  • Ensure adequate ventilation around your network equipment to prevent heat buildup, which can affect module performance and lifespan.
  • Before making any changes to your network configuration, it is good practice to back up critical data and configurations.

9. Warranty and Support

ZoeRax provides a 3-year after-sales service for this product, ensuring peace of mind regarding its quality and performance.

For any abnormal functionality, technical assistance, or warranty claims, please contact ZoeRax customer support. Have your product model and purchase details ready when contacting support.

9.1. Additional Resources

A detailed user manual in PDF format is available for download: ZoeRax SFP+ Copper Module User Manual (PDF)

© 2024 ZoeRax. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.