LAUNCH X431 PRO5 & X-PROG3

Contents

LAUNCH X431 Pro 5 & X-PROG3 User Manual

Model: X431 PRO5 & X-PROG3

Brand: LAUNCH

1. Introduction

The LAUNCH X431 Pro 5 & X-PROG3 system integrates advanced diagnostic and key programming technologies. It offers a wide range of vehicle coverage, powerful functions, and precise test results. This manual provides detailed instructions for its safe and effective use.

1.1 Product Profile

The system features intelligent diagnosis, local diagnosis, new energy vehicle diagnosis, SmartLink super remote diagnosis, X-431 remote diagnosis, service functions, one-click updates, diagnostic history, feedback, vehicle coverage lookup, and ADAS calibration.

1.2 Package List

The standard package includes the following components. Note that accessories may vary based on destination. Please consult your dealer or the provided package list for specifics.

  • Display Tablet (x1): The central processor and monitor for the system, indicating test results.
  • SmartLink C V2.0 Device (x1): Collects vehicle data and sends it to the tablet for analysis.
  • Diagnostic Cable (x1): Connects the SmartLink C device to the vehicle's OBD II DLC.
  • Data Cable (Type A-Type C) (x1): Connects the tablet to a PC for data exchange/charging.
  • Data Cable (Type A-Type B) (x1): Connects the SmartLink C device to a PC for J2534 reprogramming or to the diagnostic tablet for vehicle diagnosis.
  • Crossover Cable (x1): Connects the SmartLink C device to the modem for SmartLink Super Remote Diagnostics.
  • Password Envelope (x1): Contains the product Serial Number and Activation Code for registration.
  • Quick Start Guide (x1)
  • Power Adaptor (x1) + Switching Adaptor (x2): Charges the tablet via the AC outlet.
  • Non-16pin Adaptor Kit for Passenger Cars (Optional): For vehicles with non-16pin diagnostic sockets.
LAUNCH X431 Pro 5 and X-PROG3 main components
Figure 1.1: LAUNCH X431 Pro 5 Tablet and X-PROG3 Device
LAUNCH X431 Pro 5 tablet in its case
Figure 1.2: LAUNCH X431 Pro 5 Tablet in its protective case.
LAUNCH X-PROG3 kit with various cables and adapters
Figure 1.3: LAUNCH X-PROG3 kit, including the device and various connection accessories.

2. Important Safety Information

Warning: To avoid personal injury, property damage, or accidental damage to the product, read all information in this section before using the product.

2.1 Work Area Safety

  • Keep the work area clean and well lit. Cluttered benches and dark areas can cause accidents.
  • Do not connect or disconnect the tool while the ignition is on or the engine is running.
  • DO NOT attempt to operate the tool while driving the vehicle. Have a second person operate the tool.
  • Before testing a vehicle, put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission). Engage the parking brake and chock the tires.
  • NEVER smoke or allow a spark or flame in the vicinity of the battery or engine.
  • The vehicle shall be tested in a well-ventilated work area, as engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.).
  • Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Never leave the vehicle unattended while testing.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
  • Keep bystanders, children, and visitors away while operating the tool.
  • This product is not a toy. Do not allow children to play with or near this tool.
  • Use as intended only. Do not modify.
  • Inspect before every use; do not use if parts are loose or damaged.
  • Do not place the tool on any unstable surface.
  • Handle the tool with care. If the tool is dropped, check for breakage and any other conditions that may affect its operation.
  • Keep the tool dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth to clean the outside of the tool when necessary.
  • Store the tool and accessories in a locked area out of the reach of children.
  • To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
  • If the VCI (Vehicle Communication Interface) is not in use for a long period of time, it is suggested to unplug the VCI from the vehicle's DLC to conserve battery power.

2.2 Electrical Safety

  • Do not use the tool while standing in water.
  • Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
  • Do not expose the tool or power adaptor to rain or wet conditions. Water entering the tool or power adaptor increases the risk of electric shock.

2.3 Personal Safety

  • Wear an ANSI-approved eye shield when testing or repairing vehicles.
  • Do not wear loose clothing or jewelry. Keep hair, clothing, hands, tools, and test equipment away from moving or hot engine parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
  • Do not use the tool while tired or under the influence of drugs, alcohol, or medications. A moment of interruption can result in serious personal injury.
  • People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to a heart pacemaker could cause pacemaker interference or pacemaker failure.
  • The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. Common sense and caution must be supplied by the operator.
  • There are no user serviceable parts. Have the tool serviced by a qualified repair person using only identical replacement parts to ensure safety.
  • Please use the included battery and charger. Risk of explosion if the battery is replaced with an incorrect type.
  • Automotive batteries contain sulfuric acid that is harmful to skin. Avoid direct contact with automotive batteries. Keep ignition sources away from the battery at all times.

2.4 Precautions on Operating Vehicle's ECU

  • Do not disconnect the battery or any wiring cables in the vehicle when the ignition switch is on, as this could damage sensors or the ECU.
  • Do not place any magnetic objects near the ECU. Disconnect the power supply to the ECU before performing any welding operations on the vehicle.
  • Use extreme caution when performing any operations near the ECU or sensors. Ground yourself when disassembling PROM, otherwise the ECU and sensors can be damaged by static electricity.
  • When reconnecting the ECU harness connector, ensure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged.

3. Setup

3.1 Components & Controls

The diagnostic system consists of two main components: the Display Tablet and the SmartLink C V2.0 Device.

3.1.1 Display Tablet

The tablet acts as the central processing system, receiving and analyzing live vehicle data from the SmartLink C device and displaying test results.

Display Tablet front view with screen and buttons
Figure 3.1: Display Tablet Front View
  1. Microphone
  2. Type-A USB Port: Connects to the SmartLink C device for diagnosis, compatible add-on modules (e.g., Videoscope), or USB storage devices.
  3. Type-C USB Port: Connects to the AC outlet for charging or to a PC for data exchange.
  4. POWER Key: Turns the tablet on/off. Press and hold for 8 seconds for forced shutdown.
  5. LCD Screen: Displays test results and user interface.
  6. Speakers
  7. Rear Camera
  8. Adjustable Stand

The SmartLink C V2.0 device offers powerful functions and can be used in three ways:

  1. As a VCI (Vehicle Communication Interface): Works with the tablet's Diagnose module to obtain vehicle data wirelessly or via data cable.
  2. As a SmartLink C (Customer) Dongle: Works with the tablet's SmartLink module to issue remote diagnostic requests and execute commands from a remote SmartLink B (Business).
  3. As a Local J2534 PassThru Device: Used with a PC installed with OEM diagnostic software for J2534 reprogramming.
SmartLink C V2.0 device with ports labeled
Figure 3.2: SmartLink C V2.0 Device
  1. DB-15 Diagnostic Connector: Connects to the vehicle's DLC port via the diagnostic cable.
  2. Touch Screen
  3. LAN/WAN Port: Connects to the modem via crossover cable for SmartLink Super Remote Diagnostics.
  4. DC-IN Power Jack: Obtains power via diagnostic cable from DLC or external DC power supply.
  5. Data I/O Port: Connects to the tablet for vehicle diagnosis or to a PC for J2534 reprogramming.

3.2 Initial Use

3.2.1 Charging & Turning On

  1. Plug one end of the charging cable into the tablet and the other end into the power adaptor.
  2. Connect the power adaptor to an AC outlet. A charging icon will appear on the screen.
  3. Press the [POWER] key for 3 seconds to turn on the tablet.

Note: If the battery is completely discharged, charge for 5 minutes before turning on. Use only the included power adaptor.

3.2.2 Screen Layout

On-screen buttons at the bottom of the screen:

  • BACK: Returns to the previous screen.
  • HOME: Navigates to the Android home screen.
  • Recent Apps: Views recently launched applications.
  • Screenshot: Captures the current screen.

3.2.3 Adjust Brightness

  1. On the home screen, tap Settings > Display > Brightness level.
  2. Drag the slider to adjust brightness.

3.2.4 Change System Language

  1. On the home screen, tap Settings > System > Language & input > Languages.
  2. Tap Add a language and select the desired language.
  3. Drag the desired language to the top of the list to apply.

3.2.5 Set Standby Time

  1. On the home screen, tap Settings > Display > Advanced > Sleep.
  2. Choose the desired sleep time.

3.2.6 WLAN Setup

The tablet has built-in Wi-Fi for online functions like registration, app downloads, and remote diagnosis.

Connect to a Wi-Fi network
  1. On the home screen, tap Settings > Network & Internet > WLAN.
  2. Slide the Wi-Fi switch to ON. The tablet will search for available networks.
  3. Select a network. If encrypted, enter the password.
  4. Once "Connected" appears, the Wi-Fi connection is complete.
Disconnect from a Wi-Fi network
  1. On the home screen, tap Settings > Network & Internet > WLAN.
  2. Tap the connected network, then tap Disconnect.

3.3 Registration & Update

Registration is required for initial activation.

  1. Launch the application and tap Login.
  2. If you are a new user, tap New Registration.
  3. Fill in the required information (Username, Password, Email, Country, Zip Code, CAPTCHA).
  4. Input the 12-digit Product Serial Number and 8-digit Activation Code from the password envelope, then tap Activate.
  5. After successful registration, tap OK to navigate to the update center.

3.4 Vehicle Connection

Ensure the ignition is off and vehicle battery voltage is 9-14V or 18-30V.

For passenger cars, the DLC is usually located 12 inches from the center of the instrument panel, under or around the driver's side. For commercial vehicles, it's in the driver's cab.

Diagram showing common DLC locations in vehicles
Figure 3.3: Common DLC Locations (Example)

3.4.2 Connecting the VCI Device

For OBD II vehicles, use the diagnostic cable (DB15F to HD15F data cable and HD15M to OBD16 adaptor) to connect the VCI to the vehicle's DLC port.

Diagram illustrating VCI connection to vehicle DLC
Figure 3.4: VCI Connection to Vehicle DLC
  1. Connect the VCI (1) to the DB15F to HD15F data cable (2).
  2. Connect the HD15F to OBD16 adaptor (3) to the data cable (2).
  3. Plug the OBD16 adaptor into the vehicle's DLC port (4).
  4. For non-OBDII vehicles, select the appropriate adaptor and connect it to the data cable.
  5. Turn the vehicle's ignition ON with the engine OFF. The tool is now ready for diagnostics.

4. Operating Instructions

4.1 Job Menu Overview

After logging in, the main menu provides access to various functions:

Name Description
Intelligent Diagnose Obtain vehicle data from the cloud server for quick test via VIN reading, and check historical repair records.
Local Diagnose Manually diagnose a vehicle.
New Energy Diagnose Diagnose electronic control systems and battery packs of new-energy vehicles (requires optional extension package).
Remote Diagnose Access SmartLink Super Remote Diagnostics and X431 Remote Diagnostics platforms.
TPMS Configures the tool as a professional TPMS service tool (requires specific TSGUN device).
Software Update Updates vehicle diagnostic software and APK.
Diagnostic History Accesses diagnostic reports from previously tested vehicles and resumes operations.
Feedback Submits diagnostic logs for issue analysis.
ADAS Performs ADAS calibration operations (requires specific ADAS calibration tool).
Mall For subscription of extra software, service functions, and function extension packages.
Vehicle Coverage Checks vehicle models covered by the tool.
Info Center Includes tool information, product catalog, training videos, and repair data.
User Info Manages VCI, reports, password, Wi-Fi printer, system settings, and logout.
Other Modules Includes add-on modules (e.g., Videoscope, BST360, Immobilizer Programmer) and Android system apps.
J2534 Reprogramming Allows for ECU reprogramming using the SmartLink C as a J2534 PassThru device.

4.2 Detailed Diagnosis

4.2.1 Intelligent Diagnose

This function automatically identifies the vehicle's VIN, retrieves information from the remote server, and guides you to the vehicle information page. This page lists historical diagnostic records and provides quick access to local diagnosis and other functions.

  1. Tap Intelligent Diagnose on the Job menu.
  2. The tablet will pair with the VCI device and read the vehicle VIN.
  3. If VIN is found, the system displays vehicle information. Tap Diagnostic to start a new session or Scan History to view records.
  4. If VIN cannot be accessed, you can manually enter the VIN or use the VIN recognition module (camera scan or barcode scan).
Screenshot of AutoDetect Result screen
Figure 4.1: AutoDetect Result Screen

4.2.2 Local Diagnose

This function allows manual diagnosis of electronic control systems. You can access it via VINSCAN (camera scan or manual VIN entry) or by tapping a diagnostic software logo.

  1. Tap Local Diagnose to enter the vehicle selection page.
  2. Select the diagnostic software version (e.g., DEMO V15.51).
  3. Select the vehicle model (e.g., TOYOTA).
  4. Select the desired test item to proceed.
Diagnostic Functions
  • System Topology: Displays all available vehicle systems in a topology structure.
  • System List: Displays all available vehicle systems in a list.
  • ADAS Calibration: Performs ADAS calibration operations.
  • Smart Detection: Quickly accesses electronic control units and generates a detailed report. Malfunctioning systems are shown in red.
Screenshot of System Topology screen
Figure 4.2: System Topology Screen
Specific Diagnostic Options
  • Read Fault Code: Displays detailed information of DTC records.
  • Clear Fault Code: Erases codes from the vehicle. Ensure ignition is ON and engine is OFF.
  • Read Data Stream: Retrieves and displays live data and parameters from the vehicle's ECU.
  • Freeze Frame: Views snapshot of critical parameter values when a DTC is set.
  • Actuation Test: Accesses vehicle-specific subsystem and component tests.
  • Special Functions: Offers coding, reset, relearn, and other service functions.

4.3 New Energy Diagnose

This function applies to new energy vehicles and includes Vehicle Diagnosis and Battery Pack Detection.

4.3.1 Vehicle Diagnosis

Manually diagnose electronic control systems of new energy vehicles, similar to local diagnosis.

4.3.2 Battery Pack Detection

Detects the battery pack of new energy vehicles via vehicle model or battery brand.

Screenshot of BMS model selection screen
Figure 4.3: BMS Model Selection Screen

Available detection modes:

  • Mode 1: Via OBD diagnostic interface: Connect the diagnostic cable to the vehicle's OBD interface.
  • Mode 2: Via Jumper: Connect the diagnostic cable to the SmartLink C V2.0 device and the Jumper-8 line. Follow on-screen instructions for detailed connections.
  • Mode 3: Via Specific Test Adaptor: Connect the diagnostic cable to the SmartLink C V2.0 device and a specific test adaptor.

4.4 Remote Diagnose

The SmartLink system allows remote vehicle diagnosis and service.

Connects a SmartLink C (Customer) dongle to the vehicle's DLC and sends data to a remote SmartLink B (Business) for diagnosis by master technicians.

Diagram of SmartLink remote diagnosis workflow
Figure 4.4: SmartLink Remote Diagnosis Workflow

4.4.2 X431 Remote Diagnostics

Enables repair shops or technicians to launch instant messaging and remote diagnosis. Tap Remote Diagnose on the Job menu to access this feature.

4.5 J2534 Reprogramming

The SmartLink C can function as a J2534 PassThru device for ECU reprogramming. It works with a PC installed with OEM diagnostic software and LAUNCH's J2534 tool (downloadable from www.cnlaunch.com).

Diagram of J2534 reprogramming setup
Figure 4.5: J2534 Reprogramming Setup

5. Maintenance

5.1 Software Update

This module allows you to update diagnostic software and applications.

5.1.1 Update Diagnostic Software & APP

  1. Go to Software Update on the Job Menu and tap the Downloaded tab.
  2. The Available tab lists software that can be updated, categorized as Common, Frequently Used, and Other vehicle software.
  3. Tap Update to start downloading. Software packages will install automatically after download.
Screenshot of Software Update screen
Figure 5.1: Software Update Screen

5.1.2 Renew Subscription

If your software subscription is due, the system will prompt you to renew. Tap Renewal to open the Mall and follow the prompts.

5.2 Clear Cache

This option clears the App cache, which will restart the App. It can be used to free up space if the tablet runs out of storage.

6. Troubleshooting (FAQ)

6.1 About Diagnostic Tablet

How to save power?

  • Turn off the screen while the tool is idle.
  • Set a shorter standby time.
  • Decrease the brightness of the screen.
  • Turn off WLAN connection if not required.

Communication error with vehicle ECU?

Confirm the following:

  • Is the VCI device correctly connected?
  • Is the ignition switch ON?
  • If all checks are normal, send vehicle year, make, model, and VIN number using the Feedback feature.

Failed to enter into vehicle ECU system?

Confirm the following:

  • Is the vehicle equipped with this system?
  • Is the VCI device correctly connected?
  • Is the ignition switch ON?
  • If all checks are normal, send vehicle year, make, model, and VIN number using the Feedback feature.

How to download the diagnostic app after resetting the tablet?

Before registration, ensure the network is properly connected.

  1. Launch the browser; the official Launch website should open.
  2. Tap Login, input username and password, then tap Log In.
  3. Ensure the serial number is correct, tap APP application program, and tap the Download icon.
  4. After download, follow on-screen instructions to install.
  5. After installation, use existing username and password to login and go to the update center to download diagnostic software.

What to do if the language of vehicle diagnostic software does not match the system language?

English is the default system language. After setting the system language, go to the update center to download the corresponding language's diagnostic software. If it still displays in English, the software for that language is under development.

Remote SmartLink Diag. operations require a network broadband of 100MB or above.

"Delay" indicates the state of network communication. Different colors represent different delay statuses:

  • Green: Shorter network delay, higher success rate for remote communication.
  • Yellow: Medium network delay, medium success rate.
  • Red: Longer network delay, lower success rate. Remote ECU reprogramming operations are not suggested.

My network delay is too long.

Possible reasons:

  • Greater distance between SmartLink B2.0/SmartLink B and SmartLink C V2.0 dongle.
  • Too many network communication nodes.
  • Poor network and slow data communication speed.

Some systems of some old vehicles cannot be tested.

The SmartLink C V2.0 dongle supports CAN2.0/CANFD/DoIP protocols. Some older vehicles use K-Line communication protocol, which may not be supported.

Is it necessary to re-ignite the car after the diagnostic system starts working?

For some vehicle conditions, re-ignition provides a more detailed analysis after OBD diagnosis.

7. Specifications

7.1 Display Tablet

  • Operating System: Android
  • Memory: 4GB
  • Storage: 64GB
  • Screen: 10.1 inch capacitive touch screen, 1280x800 pixels resolution
  • Camera: Rear-facing 8.0MP camera
  • Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth
  • Working Temperature: 0°C ~ 50°C
  • Storage Temperature: -20°C ~ 70°C
  • Size: 200mm x 110mm x 47mm
  • Working Voltage: DC 9~36V
  • Power Consumption: ≤6W
  • Communication: Wireless and Wired
  • Working Temperature: 0°C ~ 50°C

7.3 Product Package

  • Length: 61 cm
  • Width: 50 cm
  • Height: 40 cm
  • Weight: 13.0 kg

8. User Tips

  • To maximize battery life, reduce screen brightness and disable Wi-Fi when not in use.
  • Always ensure the VCI device is properly connected to the vehicle's DLC before starting any diagnostic function.
  • A stable internet connection is crucial for functions like Intelligent Diagnose and remote diagnostics.
  • When troubleshooting, never replace a part based solely on a Diagnostic Trouble Code (DTC) definition. Always follow factory testing procedures to confirm the problem.
  • Clearing DTCs does not fix the underlying issue; it only clears the code. The problem must be resolved to prevent the code from reappearing.
  • If a troubleshooting procedure requires driving the vehicle, always have a second person assist to ensure safety.

9. Warranty & Support

9.1 Warranty

LAUNCH electronic products are warranted against defects in materials and workmanship for one year from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.

Final determination of defects will be made by LAUNCH. No agent, employee, or representative of LAUNCH has the authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

9.2 Disclaimer

The above warranty is in lieu of any other warranty, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.

9.3 Customer Service

For questions on the operation of the unit, please contact the seller or LAUNCH support:

A detailed user manual in PDF format is available for download at https://manuals.plus/m/a7598fbb34f7620136e937bf4d45d9baa3e78ad39e372bab5c16cf8dfc0a1078.

9.4 Statement

LAUNCH reserves the right to change product designs and specifications without notice. The actual product may differ from descriptions in the manual. LAUNCH is not responsible for misunderstandings arising from discrepancies.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.