1. Introduction
This manual provides essential information for the safe and effective use of your RASTP 20L Aluminum Universal Fuel Cell Tank. Please read all instructions carefully before installation and operation to ensure proper function and to prevent damage or injury.

2. Safety & Warnings
Important Safety Information:
Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
- Only use gasoline. Do not use methanol, alcohol, or water.
3. Product Overview
The RASTP Universal Fuel Cell Tank is designed for automotive applications, particularly for developing powerful car setups. It features a robust aluminum construction and is available in silver and black finishes.
3.1 Key Features
- High-quality Aluminum construction.
- 20L capacity.
- Built-in 0-90 Ohm fuel level sensor for accurate fuel monitoring.
- Quick release cap for easy access.
- Mirror polish finish (for silver variant).
- Universal fit for various car models.
3.2 Components

The fuel cell includes a quick-release cap, a built-in fuel level sensor with wiring, and inlet/outlet ports at the bottom.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | RASTP |
| Model Name | RS-OCC040 |
| Item Type | Fuel Tanks |
| Material | Aluminum |
| Capacity | 20L |
| Tank Length | 12.01 inches (305mm) |
| Tank Width | 11.89 inches (302mm) |
| Tank Height | 9.84 inches (250mm) |
| Item Weight | 5kg |
| External Testing Certification | ISO9001 |
| Special Features | Universal 20L oil catch can, Fuel Surge Tank |
| Color Options | Silver, Black |
Note: Listed tank dimensions are approximate and based on product diagrams. Overall product dimensions may vary slightly due to mounting brackets or other features.


5. Setup and Installation
Professional installation is highly recommended for this product.
The RASTP 20L Fuel Cell Tank is designed for universal fitment in various automotive applications. Ensure you have the necessary tools and expertise before attempting installation.
5.1 Pre-Installation Checklist
- Verify all components are present and undamaged.
- Ensure the mounting location in your vehicle is secure and provides adequate clearance.
- Confirm compatibility with your vehicle's fuel system.
5.2 Installation Steps (General Guidance)
- Securely mount the fuel cell tank in the desired location using appropriate hardware.
- Connect the fuel lines to the inlet and outlet ports of the tank. Ensure all connections are tight and leak-free.
- Connect the wiring for the 0-90 Ohm fuel level sensor to your vehicle's fuel gauge system, following your vehicle's specific wiring diagrams.
- Fill the tank with gasoline (refer to Operation section for fuel type).
- Inspect for any leaks after filling and before starting the vehicle.

6. Operation
6.1 Fuel Type
This fuel cell tank is designed for use with gasoline only. Do not use methanol, alcohol, or water, as this can damage the tank and fuel system components.
6.2 Filling the Tank
To fill the tank, use the quick-release cap located on the top. Ensure the cap is securely fastened after filling to prevent leaks and fuel evaporation.
6.3 Fuel Level Sensor
The integrated 0-90 Ohm fuel level sensor provides real-time fuel level readings to your compatible gauge. Ensure the sensor is correctly wired for accurate readings.
7. Maintenance
- Regular Inspection: Before each use, inspect the fuel cell tank for any signs of damage, leaks, or corrosion. Do not use if damaged.
- Cleaning: Keep the exterior of the tank clean. Avoid using harsh chemicals that could damage the aluminum finish.
- Storage: When not in use, turn off any associated fuel pumps or systems. Store the tank in a dry place, away from direct sunlight and extreme temperatures. Keep away from children.
- Fuel Quality: Always use clean, high-quality gasoline to prevent contamination of the fuel system.
8. Troubleshooting
This section provides general guidance for common issues. For complex problems, professional assistance is recommended.
- Fuel Leaks:
- Check all fuel line connections for tightness.
- Inspect the fuel cap for proper sealing.
- Examine the tank body for cracks or damage. If damaged, replace the tank.
- Inaccurate Fuel Level Readings:
- Verify the fuel level sensor wiring connections are secure and correct.
- Ensure the fuel gauge is compatible with a 0-90 Ohm sensor.
- The sensor itself may be faulty and require replacement.
- Reduced Fuel Flow:
- Check for obstructions in the fuel lines or filters (if installed).
- Ensure the fuel pump (if external) is functioning correctly.
9. User Tips
- Always double-check all connections after installation and before operating your vehicle.
- Consider adding a fuel filter between the tank and the engine for added protection against contaminants.
- Regularly monitor fuel pressure and flow to ensure optimal performance.
10. Warranty & Support
For any product inquiries, technical support, or warranty claims, please contact the manufacturer or your authorized dealer.
Manufacturer Information:
- Manufacturer: Ruian Lingsheng Auto Parts Co., Ltd
- Address: Fuzhou West Road, Xiacun Industrial Zone, Xincheng Street, Ruian City, Zhejiang Province.
- Contact: 3219289207@qq.com, 86-15168772293
EU Authorized Representative:
- Representative: MJCM SARL
- Address: 78 avenue des Champs Elysees Bureau 326, PARIS France
- Contact: mjcm190928@gmail.com, 33-767213611
Please retain your proof of purchase for warranty purposes.