CARABC Wireless Apple CarPlay Android Auto Module for SMEG & MRN

Contents

CARABC Wireless Apple CarPlay Android Auto Module User Manual

For Peugeot & Citroen SMEG & MRN Systems

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and troubleshooting of your CARABC Wireless Apple CarPlay and Android Auto module. This module integrates advanced smartphone connectivity into your vehicle's existing infotainment system, offering features like navigation, music, calls, and more, all controllable via voice or your car's native controls.

Compatibility: Designed for Peugeot and Citroen vehicles equipped with SMEG & MRN systems, including models such as Citroen C4, C5, DS3, DS4, DS5, and Peugeot 208, 308, 508, 3008.

CARABC Wireless CarPlay Android Auto Module installed in a car dashboard, showing CarPlay interface and module features.

Image 1: CARABC Wireless CarPlay & Android Auto Module Overview

2. Product Overview & Package Contents

2.1 Key Features

  • Wireless Apple CarPlay & Android Auto: Seamless integration of your smartphone for navigation, music, calls, and messaging.
  • Voice Control: Utilize Siri or Google Assistant for hands-free operation.
  • Screen Mirroring: Mirror your iPhone (AirPlay) or Android (AutoLink) screen to your car's display.
  • Reversing Video Input: Supports aftermarket rear-view cameras.
  • Plug & Play Installation: Designed for integration with existing vehicle systems.

2.2 Package Contents

Please check the box for the following items:

  • CARABC Wireless CarPlay/Android Auto Module
  • Power Cable
  • CAN Gateway Cable
  • WIFI Antenna
  • Installation Tools (if included)
CARABC module and its accessories: power cable, CAN gateway cable, and WiFi antenna.

Image 2: Module and Included Accessories

3. Specifications

FeatureSpecification
Operating Voltage9 - 16V
Operating Temperature-30 ~ +75°C
Stored Temperature-30 ~ +85°C
Environment Humidity≤ 98% (at 45°C), 65 ± 5% (rated)
Power Consumption500mA (rated), 3A (Max)
Shutdown Current3 mA (Clock is on)
Quiescent CurrentLess than 3 mA
USB Charging Current≤ 2A (Host activates circuit protection to control current below 1.5A if >1A)

4. Setup & Installation

CAUTION: Installation should ideally be performed by a professional. Always disconnect the vehicle's battery before starting any electrical work.

4.1 DIP Switch Settings

IMPORTANT: Ensure CarPlay POWER is disconnected when adjusting the DIP switches. Connect power only after settings are finalized.

The DIP switches configure the module for your specific car model and screen size. Refer to the table below for correct settings:

DIP SwitchesCar Model
12
OFFOFFDefault
OFFONAnother reverse data
3 & 4Screen Size
OFFOFF800*480 7"

4.2 Wiring Diagram & Connections

Follow the diagram and instructions carefully for proper connection. Ensure all connections are secure and correctly oriented.

Close-up of the CARABC module showing LVDS, ANT, and POWER ports, with a car interior display.

Image 3: Module Ports and Car Display

  • LVDS: Connect to the original vehicle LVDS cable.
  • ANT: Connect the WIFI Antenna. Ensure it's not pasted on metal surfaces.
  • POWER: Connect the power harness.
  • Power Harness Wires:
    • Yellow: B+ (Battery Positive)
    • Red: ACC (Accessory Power)
    • Black: GND (Ground)
    • Blue: Camera Power Supply (for rear-view camera)
    • Brown: Rear Detect (Connect to rearview light cable or 360 panoramic detection cable)
  • Data & Video Connections:
    • White (360-TX): Connected to 360 panoramic universal box TXD
    • White and Black (360-RX): Connected to 360 panoramic universal box RXD
    • REAR-CVBS: Connect to rearview camera or 360-degree panoramic AHD output
    • FRONT-CVBS: Connect to the front-view camera
    • AUX: Audio output
    • USB: Connect mobile phone, USB flash drive, software upgrade

4.3 Steering Wheel Button Functions

After installation, your steering wheel controls will have new functions:

  • Long press (specific button, usually 'LIST' or 'MODE'): Switch between original system and CarPlay/Android Auto interface.
  • Short press (call button): Connect/hang up phone calls.
  • Long press (call button): Activate voice control (Siri/Google Assistant) without using original car Bluetooth.
  • Volume buttons: Increase or decrease volume.

4.4 Important Audio Notes

For optimal audio experience:

  • Before switching to the CarPlay/Android Auto interface, connect your phone to the original car's Bluetooth for both calls and media. Select the original car audio on the Bluetooth stereo interface.
  • Alternatively, before switching to the CarPlay/Android Auto interface, switch the original car sound channel to the AUX channel.

5. Operating Instructions

5.1 Wireless CarPlay Connection

  1. On your iPhone, open Wi-Fi and Bluetooth.
  2. On the car's display, navigate to the CarPlay settings and select

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.