EZAIOT RF433 Wireless Thermostat

Contents

EZAIOT RF433 Wireless Smart Thermostat User Manual

Model: RF433 Wireless Thermostat

1. Introduction

The EZAIOT RF433 Wireless Smart Thermostat is designed to provide intelligent temperature control for your home, compatible with gas boilers and water floor heating systems. It offers versatile control options including a local RF thermostat, smartphone app remote control via Tuya Smart, voice control through Amazon Alexa and Google Assistant, and manual operation. This system operates on a Sub-1GHz wireless frequency for reliable communication between the thermostat and receiver.

EZAIOT RF433 Wireless Smart Thermostat and Receiver
Figure 1: EZAIOT RF433 Wireless Smart Thermostat and Receiver. The image shows the thermostat unit, the receiver plug with a 150cm cable, and icons indicating Sub-1GHz wireless, WiFi connectivity, and compatibility with Amazon Alexa and Google Assistant.

2. Package Contents

Please check the package contents upon unboxing:

  • 1x Wireless Thermostat Unit
  • 1x Receiver Plug (with 150cm cable)
  • 1x User Manual (This document and a PDF version available at PDF Manual)

3. Safety Information

WARNING: Electrical installation should only be performed by qualified personnel. Always cut off the main power supply to your heating system before any installation or wiring work.

  • Ensure the product is used within its specified voltage and current ratings.
  • Do not expose the device to water, moisture, or extreme temperatures.
  • Keep out of reach of children.
  • Do not attempt to disassemble or repair the device yourself.

4. Setup

4.1. Installation of the Receiver

Follow these steps carefully to install the receiver unit:

  1. CAUTION: Cut off the boiler's power before installation.
  2. Connect the wires from the receiver to your boiler. Typically, these are 'NO' (Normally Open) and 'COM' (Common) terminals. Refer to your boiler's manual for specific wiring diagrams.
  3. Insert the receiver plug into a main power socket.
  4. Plug the power cable of your boiler into the socket provided on the receiver unit.
Installation Steps for EZAIOT Thermostat Receiver
Figure 2: Easy Installation Guide. This diagram illustrates connecting the receiver wires to the boiler (NO, COM), plugging the receiver into a main socket, and then plugging the boiler's power into the receiver's socket. A crucial caution states to cut off boiler power before installation.

4.2. Thermostat Pairing

The EZAIOT RF433 Wireless Thermostat and its receiver are pre-paired at the factory. No manual pairing is required for initial use. Simply power on both devices, and they will establish a connection automatically.

Pre-paired Thermostat and Receiver
Figure 3: No Pairing Required. The image shows the thermostat and receiver with a

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.