BEISHI Adjustable Rolling TV Stand Instruction Manual

1. Introduction

Thank you for choosing the BEISHI Adjustable Rolling TV Stand. This manual provides detailed instructions for the safe and proper assembly, operation, and maintenance of your new TV stand. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: BEISHI Adjustable Rolling TV Stand with a 32-60 inch TV.

2. Important Safety Information

• Professional Installation: For optimal safety, it is recommended to have the stand installed by a professional using appropriate safety devices and tools, following all assembly instructions. Incorrect installation may lead to the TV falling or serious personal injury.
• Weight Capacity: Ensure the support surface can safely bear the combined weight of the TV stand and all accessories before installation. Do not exceed the maximum load weight of 50 kg (110 lbs). Exceeding this limit can result in serious injury or property damage.
• Small Parts: This product contains small parts that could pose a choking hazard if swallowed. Keep all components out of reach of children.
• Indoor Use Only: This product is designed for indoor use only. Outdoor use may cause damage to the product and increase the risk of personal injury.
• TV Compatibility: Verify that your TV's installation holes, dimensions, and weight meet the specifications and standards of this TV stand.

3. Package Contents

Before assembly, please ensure all parts are present and undamaged. Refer to the list below and the provided diagrams.

3.1. Stand Components

• Panel bracket (X1)
• Tray (X1)
• Pallet rack (X1)
• Hook (X2)
• Herringbone support legs (X2)
• Storage rack (X1)
• Pulley (X4)

3.2. Bracket Screw Accessories

• M6*40mm Screws (A) (X4)
• M6*8mm Screws (B) (X8)
• M6 Spacers (C) (X10)
• Safety Hooks (D) (X2)
• Allen Wrench (E) (X1)

3.3. TV Screw Accessories

Note: Use the appropriate screws and pads based on your TV's VESA mounting holes. Long screws can be installed by adding heightening pads between the hook and the TV set.

• M5*25mm Screws (F-1) (X4)
• M6*25mm Screws (F-2) (X4)
• M8*25mm Screws (F-3) (X4)
• 10mm Increase Pads (G-1) (X4)
• 5mm Increase Pads (G-2) (X4)
• M8 Gaskets (H-1) (X4)
• M6 Spacers (H-2) (X4)

4. Setup and Assembly Instructions

Follow these steps carefully to assemble your TV stand. An assembly video is also available for visual guidance.

4.1. Step-by-Step Assembly

1. Install Casters to Herringbone Support Legs: Screw the four pulleys (casters) into the bottom of the two herringbone support legs. Use the Allen wrench (E) to tighten them securely.
2. Assemble Pallet Rack and Pallet (Tray): Attach the pallet rack to the underside of the tray using M6*8mm screws (B) and M6 spacers (C). Ensure it is firmly fixed.
3. Connect Panel Bracket to Herringbone Support Legs: Insert the panel bracket into the designated holes on the top of the herringbone support legs.
4. Attach Pallet Assembly to Support Legs: Position the assembled pallet (tray with pallet rack) between the two herringbone support legs. Secure it using M6*40mm screws (A) and M6 spacers (C) into the pre-drilled holes in the middle of the legs. Tighten all screws.
5. Install TV Hooks: Select the appropriate TV screw accessories (F-1, F-2, F-3, G-1, G-2, H-1, H-2) for your TV's VESA mounting holes. Attach the two hooks to the back of your TV. Ensure the screws are not too short or too long.
6. Hang the TV: With assistance, carefully lift your TV and hang the installed hooks onto the panel bracket of the stand.
7. Install Safety Hooks: Once the TV is hung, use M6*8mm screws (B) to attach the safety hooks (D) to the panel crossbar and the TV hooks, securing the TV in place.
8. Install Storage Rack: Choose your preferred side (left or right) on the main column. Attach the storage rack using M6*8mm screws (B) and M6 spacers (C).

Figure 2: The TV stand frame with VESA mount and shelf bracket.

5. Operating Instructions

5.1. Adjusting TV Height

The TV stand allows for height adjustment to suit your viewing preferences. The stand offers multiple height settings: 1378mm, 1448mm, and 1518mm.

1. To adjust the height, you will need to carefully lift the TV off the panel bracket.
2. Reposition the TV hooks to a different set of holes on the panel bracket to achieve the desired height.
3. Re-hang the TV and re-install the safety hooks (D) to secure the TV at the new height.

Figure 3: Available height adjustments for the TV stand.

5.2. Mobility

The stand is equipped with 360-degree silent universal wheels, allowing for easy movement and repositioning of your TV. To move the stand, gently push it to your desired location. Ensure the path is clear of obstacles to prevent damage or tipping.

Figure 4: Key features including the 360-degree silent universal wheels.

6. Maintenance

• Regular Checks: Periodically (at least once every three months), manually check all connections between the stand and the TV. Ensure all screws are tight and none have loosened due to prolonged use.
• Cleaning: Clean the stand with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
• Part Replacement: If any parts are damaged or show signs of wear, replace them immediately. If a safety hazard is identified, replace the affected parts or reinforce the installation as needed.

7. Troubleshooting

7.1. TV Not Level

• Check Connections: Ensure all screws securing the TV to the hooks and the hooks to the panel bracket are tightened evenly.
• Verify VESA Alignment: Make sure the hooks are aligned correctly with the VESA mounting holes on your TV.

7.2. Stand Wobbles

• Tighten All Screws: Re-check and tighten all assembly screws on the stand, especially those connecting the herringbone support legs and the panel bracket.
• Even Surface: Ensure the stand is placed on a flat, even surface. Uneven flooring can cause instability.

7.3. Difficulty Moving the Stand

• Check Wheels: Ensure the 360-degree universal wheels are clean and free of debris.
• Weight Distribution: Verify that the TV's weight is evenly distributed on the stand.

8. Specifications

Figure 5: Detailed dimensions and VESA compatibility.

9. User Tips

No specific user tips were available at the time of manual creation. Always ensure all screws are tightened and the stand is on a stable surface for best performance.

10. Warranty and Support

For warranty information, technical support, or if you have any questions or are unclear about the instructions and warnings, please contact the seller or manufacturer directly for assistance.

You can also refer to the official product page for additional resources or contact information.

A PDF version of the user manual is available for download: Download User Manual (PDF)