1. Introduction
This manual provides detailed instructions for the safe and efficient use of your LANXSTAR JGB37-520 DC Gear Motor. This versatile motor features a reversible design, high torque, and an all-metal gear box, making it suitable for a wide range of applications. Please read this manual thoroughly before installation and operation.
2. Safety Information
- General Safety: Always handle the motor with care. Ensure power is disconnected before making any connections or adjustments.
- Choking Hazard: This product contains small parts. Keep away from children to prevent choking hazards.
- Electrical Safety: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ensure proper voltage and current are supplied as per specifications to avoid damage or injury.
- Heat: The motor may generate heat during operation. Avoid touching the motor directly after prolonged use.
3. Product Overview
The JGB37-520 DC Gear Motor is designed for robust performance with its all-metal gear structure, ensuring durability and reduced load noise. It features a carbon brush gearbox that is resistant to rust.



4. Specifications
General Specifications:
- Product Name: DC Gear Motor
- Model: JGB37-520
- Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
- Origin: Mainland China
- Certification: CE
- Revolutions: 7-960 RPM (depending on voltage and reduction ratio)
- Current: 1A (max)
- Motor Size: 37mm (Diameter) * 52mm (Length)
- Speed Regulation: Adjustable
- Weight: 151g
- Voltage Options: DC 6V, 12V, 24V
- Power: 2W
- Continuous Use: Up to 24 consecutive hours
- Output Shaft Size: 6mm (Diameter) * 15mm (Length)
- Direction: Forward and Reverse capable
- Gear Count: Other
- High-concerned chemical: None
Detailed Performance Parameters:
The following tables provide detailed performance characteristics for different voltage and reduction ratio configurations.

| Reduction ratio | Rated voltage (V) | No-load Speed (±10%RPM) | No-load Current (A) | Rated Speed (±10%RPM) | Rated Current (A) | Rated Torque (KG.CM) | Rated Power (W) | Stall Torque (KG.CM) | Stall Current (A) | Weight (g) | Size (MM) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.25 | 6 | 1280 | 0.2 | 985 | 0.5 | 0.10 | 1.05 | 0.6 | 3 | 136 | 19 |
| 10 | 6 | 800 | 0.2 | 615 | 0.5 | 0.16 | 1.05 | 1.0 | 3 | 136 | |
| 18.75 | 6 | 430 | 0.2 | 331 | 0.5 | 0.30 | 1.06 | 1.9 | 3 | 140 | 22 |
| 30 | 6 | 265 | 0.2 | 204 | 0.5 | 0.48 | 1.05 | 3 | 3 | 140 | |
| 56.25 | 6 | 140 | 0.2 | 108 | 0.5 | 0.90 | 1.04 | 5.6 | 3 | 145 | 24 |
| 90 | 6 | 90 | 0.2 | 69 | 0.5 | 1.44 | 1.07 | 9 | 3 | 145 | |
| 131.25 | 6 | 60 | 0.2 | 46 | 0.5 | 2.10 | 1.04 | 13 | 3 | 150 | 26.5 |
| 168.75 | 6 | 47 | 0.2 | 36 | 0.5 | 2.70 | 1.05 | 17 | 3 | 150 | |
| 270 | 6 | 30 | 0.2 | 23 | 0.5 | 4.32 | 1.05 | 27 | 3 | 150 | |
| 506.25 | 6 | 16 | 0.2 | 12 | 0.5 | 8.10 | 1.05 | No locked rotor or instant reversal with load | 160 | 29 | |
| 810 | 6 | 10 | 0.2 | 8 | 0.5 | 12.96 | 1.05 | No locked rotor or instant reversal with load | 160 |

| Reduction ratio | Rated voltage (V) | No-load Speed (±10%RPM) | No-load Current (A) | Rated Speed (±10%RPM) | Rated Current (A) | Rated Torque (KG.CM) | Rated Power (W) | Stall Torque (KG.CM) | Stall Current (A) | Weight (g) | Size (MM) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.25 | 12 | 960 | 0.04 | 738 | 0.3 | 0.17 | 1.3 | 0.7 | 1.4 | 136 | 19 |
| 10 | 12 | 600 | 0.04 | 462 | 0.3 | 0.27 | 1.3 | 1.2 | 1.4 | 136 | |
| 18.75 | 12 | 320 | 0.04 | 246 | 0.3 | 0.5 | 1.3 | 2.2 | 1.4 | 140 | 22 |
| 30 | 12 | 200 | 0.04 | 154 | 0.3 | 0.8 | 1.3 | 3.5 | 1.4 | 140 | |
| 56.25 | 12 | 107 | 0.04 | 82 | 0.3 | 1.5 | 1.3 | 6.5 | 1.4 | 145 | 24 |
| 90 | 12 | 66 | 0.04 | 51 | 0.3 | 2.4 | 1.3 | 10.4 | 1.4 | 145 | |
| 131.25 | 12 | 45 | 0.04 | 35 | 0.3 | 3.5 | 1.3 | 15.2 | 1.4 | 150 | 26.5 |
| 168.75 | 12 | 35 | 0.04 | 27 | 0.3 | 4.5 | 1.3 | 19.5 | 1.4 | 150 | |
| 270 | 12 | 22 | 0.04 | 17 | 0.3 | 7.2 | 1.3 | 31 | 1.4 | 150 | |
| 506.25 | 12 | 12 | 0.04 | 9 | 0.3 | 13.6 | 1.3 | No locked rotor or instant reversal with load | 160 | 29 | |
| 810 | 12 | 7 | 0.04 | 6 | 0.3 | 21.7 | 1.3 | No locked rotor or instant reversal with load | 160 |
| Reduction ratio | Rated voltage (V) | No-load Speed (±10%RPM) | No-load Current (A) | Rated Speed (±10%RPM) | Rated Current (A) | Rated Torque (KG.CM) | Rated Power (W) | Stall Torque (KG.CM) | Stall Current (A) | Weight (g) | Size (MM) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.25 | 24 | 960 | 0.04 | 738 | 0.3 | 0.17 | 1.3 | 0.7 | 1.4 | 136 | 19 |
| 10 | 24 | 600 | 0.04 | 462 | 0.3 | 0.27 | 1.3 | 1.2 | 1.4 | 136 | |
| 18.75 | 24 | 320 | 0.04 | 246 | 0.3 | 0.5 | 1.3 | 2.2 | 1.4 | 140 | 22 |
| 30 | 24 | 200 | 0.04 | 154 | 0.3 | 0.8 | 1.3 | 3.5 | 1.4 | 140 | |
| 56.25 | 24 | 107 | 0.04 | 82 | 0.3 | 1.5 | 1.3 | 6.5 | 1.4 | 145 | 24 |
| 90 | 24 | 66 | 0.04 | 51 | 0.3 | 2.4 | 1.3 | 10.4 | 1.4 | 145 | |
| 131.25 | 24 | 45 | 0.04 | 35 | 0.3 | 3.5 | 1.3 | 15.2 | 1.4 | 150 | 26.5 |
| 168.75 | 24 | 35 | 0.04 | 27 | 0.3 | 4.5 | 1.3 | 19.5 | 1.4 | 150 | |
| 270 | 24 | 22 | 0.04 | 17 | 0.3 | 7.2 | 1.3 | 31 | 1.4 | 150 | |
| 506.25 | 24 | 12 | 0.04 | 9 | 0.3 | 13.6 | 1.3 | No locked rotor or instant reversal with load | 160 | 29 | |
| 810 | 24 | 7 | 0.04 | 6 | 0.3 | 21.7 | 1.3 | No locked rotor or instant reversal with load | 160 |
5. Setup
Wiring Instructions:
The JGB37-520 motor supports both forward and reverse operation, and its speed can be adjusted using a potentiometer. Refer to the video demonstration for a visual guide on wiring.
- Power Connection: Connect the DC power supply (6V, 12V, or 24V, matching your motor model) to the control circuit.
- Motor Connection: Connect the motor terminals to the appropriate outputs on your control board.
- Direction Control: Use a switch (as shown in the video) to control the motor's direction. Pressing one way initiates forward rotation, pressing the other way initiates reverse rotation, and the center position stops the motor.
- Speed Control: If using a potentiometer for speed control, connect it to the designated terminals on your control board. Rotate the potentiometer to adjust the motor's speed.
6. Operating Instructions
- Ensure all wiring is correct and secure before applying power.
- Apply the rated DC voltage to the motor through your control circuit.
- Use the direction switch to start the motor in the desired direction (forward or reverse).
- Adjust the motor speed using the connected potentiometer, if applicable.
- To stop the motor, set the direction switch to the 'off' or neutral position.
- Avoid exceeding the rated load torque to prevent motor stalling or damage.
7. Maintenance
- Cleaning: Keep the motor clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or solvents.
- Inspection: Periodically inspect the motor for any signs of wear, damage, or loose connections.
- Lubrication: The all-metal gear box is designed for long-term operation. However, if operating in harsh conditions, consult a specialist for appropriate lubrication.
- Storage: Store the motor in a dry, cool environment away from direct sunlight and corrosive substances.
8. Troubleshooting
- Motor Not Running:
- Check power supply: Ensure correct voltage and sufficient current.
- Check wiring: Verify all connections are secure and correct.
- Check switch/potentiometer: Ensure they are functioning correctly and set to an 'on' position.
- Motor Running Slowly/Weakly:
- Check power supply: Insufficient voltage or current can reduce performance.
- Check load: Ensure the motor is not overloaded beyond its rated torque.
- Inspect gears: Check for any obstructions or damage in the gear mechanism.
- Unusual Noise/Vibration:
- Check mounting: Ensure the motor is securely mounted and not vibrating against other components.
- Inspect gears: Look for signs of wear or foreign objects in the gearbox.
9. User Tips
- This motor has been successfully used in applications such as machines for toroidal transformers, indicating its suitability for precision and power-demanding tasks.
- Users have reported excellent performance, highlighting the motor's reliability.
- Consider the specific reduction ratio and voltage to match your project's speed and torque requirements for optimal results.
10. Warranty & Support
For any technical assistance, warranty claims, or support inquiries, please contact the manufacturer:
- Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
- Address: A302, Building 25, Hong Chao Yuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen
- E-mail/Tel: 56827370@qq.com / 86-15089309815
Please refer to the official user manual PDF for additional details and diagrams: User Manual (PDF)