Hongwin 10594555

Contents

Hongwin 10594555 ABS Sensor User Manual

Model: 10594555 | Brand: Hongwin

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Hongwin 10594555 Rear Left Right ABS Sensor. This sensor is designed for use in Chinese SAIC MG ZS and ROEWE RX3 Auto cars. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and safety.

Safety Information

WARNING:

  • TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN.
  • DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES, OR PLAY PENS.
  • THIS BAG IS NOT A TOY.

Setup and Installation

Professional installation is highly recommended. No specific installation instructions are included in the product package. Ensure you have the necessary tools and expertise before attempting installation.

Compatibility Check:

This ABS sensor (OEM NO.: 10594555) is compatible with:

  • Chinese SAIC MG ZS Auto car
  • ROEWE RX3 Auto car

Note: Compatibility information is for reference only. Always confirm the OE number (10594555) with your original part and check the listed pictures above to ensure a correct match for your vehicle's specific model and year.

Installation Guidelines:

  1. Verify Part: Before installation, compare the new sensor with your original part. Ensure the dimensions and model type are correct.
  2. Handle with Care: Exercise caution when handling the sensor and its connector plug to prevent damage.
  3. Secure Connection: Ensure the 2-pin connector is securely and correctly plugged into the vehicle's wiring harness.
  4. Mounting: Mount the sensor firmly in its designated position on the rear left or right wheel, as appropriate for the replacement.
Hongwin ABS Sensor with 2-pin connector
Figure 1: Hongwin ABS Sensor with 2-pin connector. Note the 2-pin plug for electrical connection.
Dimensional drawing of the ABS sensor components
Figure 2: Dimensional drawing of the ABS sensor components, showing measurements for the sensor body and connector (e.g., 2.21"/56.2MM, 1.87"/47.6MM, 0.55"/14.1MM, 0.45"/11.5MM).

Operation

The ABS sensor is a critical component of your vehicle's Anti-lock Braking System (ABS). It monitors the rotational speed of the wheel and transmits this data to the ABS control unit. This information allows the ABS system to prevent wheel lock-up during braking, maintaining steering control and reducing stopping distances.

Once correctly installed, the sensor operates automatically as part of the vehicle's braking system. No direct user interaction is required for its operation.

Maintenance

ABS sensors are generally maintenance-free components. However, regular vehicle inspections should include checking the sensor and its wiring for any signs of physical damage, corrosion, or loose connections. Keep the sensor area clean from excessive dirt or debris that could interfere with its operation.

Troubleshooting

If your vehicle's ABS warning light illuminates after sensor replacement, or if you experience issues with your ABS system, consider the following:

  • Check Connections: Ensure the sensor's electrical connector is fully seated and free from corrosion.
  • Inspect Wiring: Look for any cuts, pinches, or damage to the sensor's wiring harness.
  • Sensor Placement: Verify the sensor is correctly positioned and securely mounted, with no excessive gap between the sensor and the tone ring.
  • Diagnostic Scan: A professional diagnostic scan tool can read fault codes from the ABS module, providing specific information about the issue.
  • Professional Assistance: If problems persist, consult a qualified automotive technician.

Specifications

Attribute Value
OEM NO. 10594555
Product Name Auto Sensor (ABS Sensor)
Sensor Type Magnetic Induction
Measuring Range 10594555
Linear 10594555
Resolution 10594555
Hysteresis for Chinese SAIC MG ZS ROEWE RX3 Auto car
Repeatability for Chinese SAIC MG ZS ROEWE RX3 Auto car
Sensitivity 10594555
High-concerned chemical None
Country Origin Mainland China
Package Weight 0.12 kg
Package Dimensions (L x W x H) 10 cm x 10 cm x 10 cm

User Tips

  • Always double-check the OE number and visual appearance against your original part to ensure perfect fitment, especially for specific model years (e.g., 2023 models).
  • Given the critical nature of ABS components, professional installation is strongly advised to avoid potential issues and ensure correct system operation.

Warranty and Support

Warranty:

This product comes with a ONE YEAR GUARANTEE from the date of purchase.

Manufacturer Information:

  • Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
  • Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China

Customer Service:

  • Email: inf@hwautoparts.com
  • Telephone: 86-18005775583

EU Representative Information:

  • Representative: MJCM SARL
  • Representative Address: CN-78 avenue des Champs Elysees Bureau 326
  • Telephone: 33-767213611
  • E-mail: mjcm190928@gmail.com

For additional documentation, a user manual in PDF format is available. Please refer to the seller's product page for the direct link to the PDF document.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.