Introduction
This manual provides instructions for the proper use, refilling, and maintenance of your einkshop refillable ink cartridges. These cartridges are designed as a cost-effective and environmentally friendly alternative for compatible Brother printers. Please read this manual carefully before use to ensure optimal performance and longevity of your cartridges and printer.
Safety Information
- Keep ink and cartridges out of reach of children.
- Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water.
- Do not ingest ink. If swallowed, seek medical attention immediately.
- Store cartridges in a cool, dry place away from direct sunlight.
- Handle cartridges carefully to prevent damage or leaks.
Package Contents
Verify that your package contains the following items:
- Refillable Ink Cartridges (Black, Cyan, Magenta, Yellow)

Setup and Refilling Instructions
These cartridges are shipped empty and must be refilled before initial use.
1. Identifying Cartridges
Each cartridge is labeled with its color (Black, Cyan, Magenta, Yellow) and compatible model series. Ensure you match the correct color ink to the corresponding cartridge.

2. Refilling the Cartridges
Follow these steps carefully to refill your cartridges:

- Take out Color Plug (Ink Hole): Locate the color-coded plug on top of the cartridge. Carefully remove this plug to expose the ink filling hole.
- Using Syringes Refill Each Color: Insert the syringe needle into the ink hole and slowly inject the appropriate color ink.
- Refill to 80% Ink and OK: Fill the cartridge to approximately 80% of its capacity. Do not overfill.
- Refill Well Color Plug Install Well, Using It Need to Take Out Yellow Label (Air Hole): Once refilled, securely reinsert the color plug. Then, locate and remove the small yellow label or plug, which serves as the air hole for proper ink flow during printing.
Installation into Printer
After refilling, install the cartridges into your Brother printer:
- Turn on your printer and open the ink cartridge cover.
- Wait for the print head assembly to move to the cartridge replacement position.
- Remove the old cartridge (if any) by pressing the release lever.
- Insert the refilled cartridge into the correct slot, ensuring it clicks into place. The labels on the cartridge indicate the correct orientation ('THIS SIDE UP', 'THIS WAY IN').
- Close the ink cartridge cover. The printer may perform a cleaning cycle or display an ink level warning. This is normal for compatible cartridges.
Maintenance
- Regular Refilling: Refill cartridges as soon as ink levels are low to prevent air from entering the print head, which can cause clogs.
- Print Head Cleaning: If print quality degrades, use your printer's utility software to perform a print head cleaning cycle. Refer to your printer's manual for specific instructions.
- Storage: If a refilled cartridge will not be used for an extended period, store it upright in an airtight container to prevent ink drying.
Troubleshooting
- Printer Not Recognizing Cartridge:
- Ensure the cartridge is fully seated in its slot. Remove and reinsert firmly.
- Verify that the air hole (yellow label/plug) is removed.
- Some Brother printers may require specific chip recognition. If your printer requires a chip and these cartridges do not have one, they may not be recognized.
- Poor Print Quality (Streaks, Fading, Missing Colors):
- Check ink levels and refill if necessary.
- Perform a print head cleaning cycle through your printer's software.
- Perform a nozzle check to identify clogged nozzles.
- Ink Leaking:
- Ensure the color plug (ink hole) is securely reinserted after refilling.
- Avoid overfilling the cartridges.
Specifications
| Attribute | Detail |
|---|---|
| Brand Name | einkshop |
| Compatible Brand | Brother |
| Model Numbers | LC51, LC57, LC37, LC960, LC970, LC10, LC1000 |
| Compatible Printers | Brother DCP-130C, 135C, 150C, DCP-330C, 350C, and others using specified LC series cartridges. |
| Cartridge's Status | EMPTY (for refilling) |
| Feature | Compatible |
| Bulk Packaging | No |
| Type | Ink Cartridge |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 16 cm, Width: 11 cm, Height: 6 cm |
| Package Weight (approx.) | 0.136 kg |
User Tips
- These cartridges offer good value for money compared to original cartridges.
- Always ensure you purchase the correct model numbers compatible with your specific printer.
- Refill cartridges over a protected surface to easily clean up any accidental ink spills.
Frequently Asked Questions (FAQ)
- Q: Do these cartridges have a chip?
- A: The product information does not explicitly state the presence of chips. Some Brother printers require chipped cartridges for proper recognition. Please verify your printer's requirements. If your printer requires a chip, these cartridges may not be suitable or may require a chip resetter (not included).
- Q: Are these compatible with Brother DCP-770CW?
- A: Compatibility depends on the specific LC series ink cartridges your DCP-770CW printer uses. Please check your printer's manual or existing cartridges to confirm if it uses LC51, LC57, LC37, LC960, LC970, LC10, or LC1000 series cartridges.
Warranty and Support
For additional information or support, please refer to the official user manual PDF provided by the seller:
If you encounter issues not covered in this manual, please contact the seller or manufacturer for assistance.