1. Product Overview
The GGBEE LED Spotlight Magnetic Wall Light is a versatile, dimmable, and rechargeable lighting solution designed for various indoor applications such as reading, bedside lighting, or accent lighting. It features a touch switch, Type-C charging, and a magnetic installation method for convenience.
Image 1: LED Spotlight showcasing its 3 light color options (Yellow, White, Neutral).
Image 2: The LED spotlight installed on a wall, emphasizing its wiring-free and nail-free installation.
2. Package Contents
Please check the package for the following items:
- LED Spotlight Magnetic Wall Light
- Magnetic Base / Patch
- USB Type-C Charging Cable (may vary by package)
- User Manual (this document)
3. Setup and Installation
The LED Spotlight features a simple, wiring-free, and nail-free installation process using its magnetic base.
- Step 1: Prepare the Surface
Ensure the desired installation surface is clean, dry, and smooth. - Step 2: Attach the Adhesive Patch
Remove the sticky paper from the back of the magnetic patch. - Step 3: Mount the Magnetic Patch
Firmly attach the magnetic patch to your desired location on the wall or furniture. Press for a few seconds to ensure good adhesion. - Step 4: Magnetize the Fixture
Place the LED spotlight fixture onto the magnetic patch. The strong magnet will hold it securely in place.
Image 3: Visual guide for the 3-step magnetic installation process.
4. Operating Instructions
The LED spotlight is designed for intuitive operation with a touch-sensitive switch and adjustable light direction.
- Power On/Off: Lightly press the touch switch located on the lamp base to turn the light on or off.
- Brightness Adjustment (Dimming): Long press the touch switch to infinitely dim the light. Release when the desired brightness is achieved.
- Color Temperature Adjustment: The lamp offers 3 light colors (Yellow, White, Neutral). Lightly press the touch switch to cycle through these color temperatures.
- Light Direction Adjustment: The spotlight head can be adjusted 90 degrees up/down and rotated 340 degrees to direct the light precisely where needed.
Image 4: Illustration of touch control for light switch (light press) and infinite dimming (long press).
Video Demonstration:
Video 1: Demonstrates the lamp's adjustable light direction (90-degree up/down, 340-degree rotation) and touch control features.
5. Battery Maintenance and Charging
The lamp is equipped with a USB rechargeable battery. Proper charging and maintenance are crucial for optimal battery life.
- Initial Charge: When you receive the product, it may have a low battery. Charge it for approximately 2-4 hours to achieve the best charging level.
- Charging Process: Connect the USB Type-C cable to the charging port on the lamp holder and plug the other end into a power socket.
- Charging Indicators: During charging, the indicator light on the lamp turns red. Once fully charged, the indicator light on the USB socket (if applicable) turns green.
- Charger Recommendation: It is recommended to use a charger with a rated voltage of DC5V and a current of ≤ 2 amps. Avoid using fast charging to prevent damage to the battery.
- Battery Cycles: For best performance, release and fully charge the battery within the first 10 cycles.
- Timely Charging: Recharge the battery as soon as possible after it is depleted. Prolonged periods without charging can affect battery life.
- Monthly Charge: If the lamp is not used frequently, charge the battery at least once a month to protect it.
- Non-Replaceable Battery: The battery in this lamp is not replaceable. The lamp will become unusable once the battery life reaches a certain level.
Image 5: Close-up of the Type-C charging port on the lamp, connected to a power adapter.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Charge the lamp for 2-4 hours. |
| Lamp does not dim. | Incorrect operation. | Ensure you are long-pressing the touch switch for dimming. A light press changes color temperature or turns on/off. |
| Lamp does not charge. | Faulty cable/adapter or improper connection. | Check the USB cable and adapter. Ensure they are properly connected. Try a different cable or adapter. |
| Light is too dim even at max brightness. | Battery is low. | Charge the lamp fully. |
| Lamp falls off the wall. | Improper installation of the magnetic patch or unsuitable surface. | Ensure the surface is clean, dry, and smooth before applying the adhesive patch. Press firmly for sufficient adhesion. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | Decorative Wall Lamp |
| Brand Name | GGBEE |
| Model Name | Led Wall Lamp |
| Item Type | Wall Lamps |
| Installation Type | Wall Mounted (Magnetic, self-contained) |
| Switch Type | Touch On/Off Switch |
| Is Dimmable | Yes (Infinite dimming) |
| Light Colors | 3 (Yellow, White, Neutral) |
| Power Source | DC (USB Rechargeable Battery) |
| Input Current | DC5V 1A/2A (Recommended) |
| Voltage | 12 V |
| Body Material | Plastic |
| Luminous Flux | <60 |
| Is Bulbs Included | No (Integrated LED) |
| Features | USB Charging, Magnetic |
| Certification | CE |
| Dimensions (approx.) | Base Diameter: 8cm, Lamp Length: 6.7cm, Lamp Diameter: 3cm, Base Thickness: 2.5cm |
Image 6: Detailed product parameter diagram including dimensions and key specifications.
8. User Tips
- To adjust the brightness, perform a long press on the touch button. This allows for infinite dimming to suit your preference.
- A short press on the touch button will cycle through the three available light colors (yellow, white, and neutral), offering versatility for different moods or tasks.
- Remember to charge the lamp regularly, especially if you notice the light becoming dim, to maintain optimal battery performance.
9. Additional Resources
For more detailed information, including multilingual instructions, please refer to the official user manual PDF: