NIDITON TMPH2402

Contents

Digital LED Mirror Alarm Clock User Manual

Brand: NIDITON

Model: TMPH2402

1. Important Cautions

  1. Before using the product, please remove the protective film from the mirror surface following the guide label.
  2. Please use the DC adapter (5V1A) specified by the product.
  3. Please read the manual carefully, so that you can use the product correctly, otherwise it will be damaged.
  4. Please notice the polarity of the battery during installation.
  5. Please take out the batteries if this product is not used for a long time to avoid possible damage caused by battery leaks.

2. Product Overview and Features

The NIDITON TMPH2402 Digital LED Mirror Alarm Clock is a versatile device designed for bedrooms, home offices, and kids' rooms. It features a clear LED display, temperature monitoring, and a sleek mirror finish.

Digital LED Mirror Alarm Clock displaying 12:30 on a white table

Figure 1: Front view of the Digital LED Mirror Alarm Clock.

Key Features:

  • LED time display with selectable 12/24 hour modes.
  • Date display (month, date, year from 2000 to 2099).
  • Temperature display.
  • Two levels of brightness adjustment: light and dark.
  • Night mode (18:00-6:00): LED light dims automatically. Daytime: automatic brightness.
  • Time memory function: 3*AAA battery drivers for backup.
  • Power supply: 3*AAA Batteries (excluded) / 1*USB charging cable (included).
  • HD Mirror Display Screen: Functions as both a clock and a full-screen mirror.
Hand holding the clock, showing its reflective mirror surface

Figure 2: The HD mirror display screen also functions as a mirror.

3. Setup

3.1 Powering the Device

The clock can be powered by either 3*AAA batteries (not included) or the included USB charging cable.

  • When powered by battery or USB cable, a "BI" sound will be heard, and the LED light will turn on.
  • When running on battery, pressing the SNZ/LIGHT button will illuminate the LED for 15 seconds.
  • When continuously powered by the USB cable, the LED will remain lit.
Back view of the alarm clock showing battery compartment for 3 AAA batteries and a DC 5V power jack

Figure 3: Back panel showing battery compartment and power jack. Ensure correct battery polarity.

3.2 Button Functions

The clock features several buttons on the top for easy operation:

  • MODE Button: Press to switch display between Time, Date, Temperature, and Night Mode on/off.
  • UP Button: Press to switch between two brightness levels (light and dark).
  • ALARM Button: Press in time mode to enter alarm mode. In alarm mode, press to activate/deactivate the alarm function.
  • SNZ/LIGHT Button: Used to stop the alarm and activate the snooze function.
Diagram showing intensity control with two brightness levels: Daytime (highlight) and Night (low-light level)

Figure 4: Intensity control for display brightness.

4. Operating Instructions

4.1 Time and Date Setting

  1. In time mode, hold the MODE button to enter time setting mode. The sequence is: 12h/24h → Hour → Minute.
  2. In date mode, hold the MODE button to enter date setting mode. The sequence is: Year → Month → Day.
  3. Press the UP or DOWN button to adjust the digit.
  4. If no operation is performed within 10 seconds, the setting will revert to the normal display.

4.2 Alarm Setting

  1. In time mode, hold the ALARM button for 2 seconds. The hour will flash, and you will enter the alarm time setting mode. The sequence is: Hour → Minute → Snooze Time (1-60 minutes) → Choose Working Day Alarm (1-7 / 1-6 / 1-5).
  2. Press the UP or DOWN button to adjust the digit. If no operation is performed within 10 seconds, the setting will revert to the normal display.
  3. Press the SNZ/LIGHT button to stop the alarm and activate the snooze function. The AL icon will flash until the next alarm time is reached.
  4. The alarm duration is 1 minute.

4.3 Night Mode

  1. Press the MODE button 3 times to enter night mode. Press UP/DOWN to turn night mode on/off.
  2. The default night time period is 18:00-5:59.
  3. When night mode is active, hold the MODE button to enter night mode setting mode: Start Hour → Start Minute → Stop Hour → Stop Minute.

4.4 Temperature Display

  1. In time display, press the MODE button twice to display the temperature.
  2. Press the DOWN button to switch the temperature display between Celsius (°C) and Fahrenheit (°F) units.
  3. In temperature mode, hold the MODE button until a "BI" sound is heard. The LED will switch display: Time (10s) → Temperature (3s) → Date (3s) → Repeat.
  4. Hold the MODE button again until a "BI" sound is heard; it will revert to time mode and will not switch display.

5. Maintenance

  • Clean the mirror surface gently with a soft, dry cloth. Avoid abrasive cleaners.
  • If the clock will not be used for an extended period, remove the AAA batteries to prevent leakage and potential damage to the device.
  • Store in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

ProblemPossible CauseSolution
Display is dim or offNot connected to USB power, or in night mode. Batteries may be low.Connect to USB power for continuous light. Press UP button to adjust brightness. Check/replace batteries.
Alarm does not soundAlarm function deactivated or not set correctly.Ensure alarm is activated in alarm mode. Re-set alarm time and working days.
Settings revert unexpectedlyNo operation performed within 10 seconds during setting mode.Complete settings within 10 seconds or re-enter setting mode.
Clock loses time during power outageNo backup batteries installed or batteries are dead.Install fresh 3*AAA batteries for time memory function during power interruptions.

7. Specifications

AttributeValue
Model NumberTMPH2402
Display TypeDigital LED
Motivity TypeDigital
FunctionAcoustic Control Sensing, Temperature Display, Alarm, Night Mode
MaterialPVC
StyleBrief, Geometric
Power Supply3*AAA Batteries (not included) / DC 5V 1A via USB cable (included)
Battery IncludedNo (requires 3*AAA batteries, not included)
Dimensions (Length x Width)140mm x 50mm (5.5 inch length)
Weight130g (product), 144g (package)

8. User Tips

  • For continuous display and full functionality, it is recommended to power the clock via the USB cable.
  • To ensure the alarm functions during a power outage, always keep fresh AAA batteries installed.
  • The mirror surface can be used for quick checks, but remember to remove the protective film first for the best clarity.

9. Support and Further Information

For detailed instructions and further support, please refer to the official user manual PDF:

View User Manual (PDF)

Manufacturer: Guangzhou Alliance Business Development Co., Ltd

Email: gztmsy@dingtalk.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.