VILCORN JT01

Contents

VILCORN JT01 Wireless Arcade Gaming Joystick User Manual

Model: JT01

1. Important Safety Information

Please read and understand the following safety precautions before using the product:

  1. Do not store this product in a damp or high-temperature environment.
  2. Avoid dropping, striking, puncturing, or attempting to disassemble the product to prevent damage.
  3. This product contains a built-in battery. Do not dispose of it with household waste.
  4. Do not charge the controller near open flames or other heat sources.
  5. Non-professional personnel should not disassemble this product. Unauthorized disassembly will void the after-sales warranty service.

2. Package Contents

Ensure all items are present in the package:

  • VILCORN JT01 Arcade Gaming Joystick
  • USB Type-C Data Cable
  • Phone Holder (Stretching Bracket)
  • 2.4G Wireless Receiver (for PC 2.4G mode)
  • User Manual (this document)
Package contents including joystick, cable, phone holder, and manual.
Image: Contents of the product package.

3. Product Overview

Familiarize yourself with the layout and functions of your VILCORN JT01 Arcade Gaming Joystick.

Diagram of the joystick showing all buttons and ports: rocking bar, START, SELECT, TURBO, L2, R2, HOME, X, Y, A, B, L, R, Charging reset port, and indicator lights 1, 2, 3, 4.
Image: Front and side view of the joystick with labeled buttons and ports.
  • Rocking Bar (Joystick): 360-degree movement for directional control.
  • Function Keys: A, B, X, Y, L, R, L2, R2.
  • Control Buttons: START, SELECT, TURBO, HOME.
  • Charging/Reset Port: USB Type-C port for charging and wired connection.
  • Indicator Lights (1, 2, 3, 4): Indicate connection status and modes.

4. Setup and Connection

4.1 Charging the Joystick

The joystick has a built-in battery. Observe the indicator light for charging status:

  • Low Power: The indicator light flashes quickly.
  • Charging: The indicator light flashes slowly.
  • Fully Charged: The indicator light turns off.

Use a DC5V/500mA power source for charging.

4.2 Connection Modes

The VILCORN JT01 supports Wired, Bluetooth, and 2.4G Wireless connections across various platforms.

Diagram showing three connection modes: Wired Connection (USB icon), BT Wireless (Bluetooth icon), and 2.4G Wireless (2.4G icon with receiver required). Also shows a phone attached to the joystick via a stretching bracket.
Image: Overview of the three available connection modes.

4.2.1 Wired Connection

  1. Connect the joystick to your device (PC, PS3, PS4, PS5, Switch, Android) using the provided USB Type-C data cable.
  2. The system will automatically identify the platform.
  3. For PC, press the HOME key for 2 seconds to switch between PC/PS3 mode and XBOX360 mode if needed.

4.2.2 Bluetooth Wireless Connection

Connection instructions for PS3/PS4/PS5, Switch, Android ShootingPlusV3, and iOS V3 modes. Each section shows the device, the joystick, and the specific button combination for pairing.
Image: Detailed connection steps for various platforms.

The joystick uses Bluetooth 5.0EDR/BLE for wireless connection.

  • For SWITCH Model:
    1. On the Switch console, go to Controllers > Change Grip/Order.
    2. Press and hold R2 + HOME keys simultaneously for 2 seconds on the joystick. The LED light will flash.
    3. Upon successful pairing, Indicator 4 will be on.
    4. Press the HOME key directly to reconnect automatically in the future.
  • For PS3/PS4/PS5 Model:
    1. Connect the joystick to the PS3/PS4/PS5 host using the TYPE-C USB data cable.
    2. Press the HOME key to pair.
    3. Upon successful pairing, Indicator 1 will be on.
    4. Press the HOME key directly to reconnect automatically.
    5. Note: Touchpad function is not available for PS4/PS5. Only PS4 games can be played on PS5.
  • For Android ShootingPlusV3 Mode (Harmony system compatible):
    1. Press and hold A + HOME keys simultaneously for 2 seconds. The rocker lamp will flash.
    2. On your Android phone, search for the device name "BSP-Y01" and select Connect.
    3. Upon successful connection, Indicator 4 will be on.
    4. Press the HOME key directly to reconnect automatically.
  • For iOS ShootingPlusV3 Mode:
    1. Press and hold Y + HOME keys simultaneously for 2 seconds. The turntable lamp will flash quickly.
    2. On your Apple device, search for the device name "BSP-Y01" and select Connect.
    3. Upon successful connection, Indicator 3 will be on.
    4. Press the HOME key directly to reconnect automatically.
  • For Android Standard Mode:
    1. Press and hold X + HOME keys simultaneously for 2 seconds. The rocker lamp will flash quickly.
    2. On your Android/Hongmeng mobile phone, search for the device name "BSP-Y01" and select Connect.
    3. Upon successful connection, Indicator 2 will be on.
    4. Press the HOME key directly to reconnect automatically.
  • For iOS MFi/Apple Arcade Mode (iOS 13.0 or above):
    1. Press and hold B + HOME keys simultaneously for 2 seconds. The rocker lamp will flash quickly.
    2. On your Apple device, search for the device name "DUALSHOCK 4 Wireless Controller" and select Connect.
    3. Upon successful connection, Indicator 1 will be on.
    4. Press the HOME key directly to reconnect automatically.
    5. Note: MFi games can be downloaded from the Shanwan MFi app.

4.2.3 2.4G Wireless Connection (PC/PS3/XBOX360)

This mode requires the included 2.4G wireless receiver (dongle).

  1. Plug the 2.4G wireless receiver into your computer.
  2. Press and hold L + HOME keys simultaneously for 2 seconds on the joystick. The rocker lamp will flash quickly.
  3. Upon successful connection, Indicator 3 and 4 will be on.
  4. Press the HOME key directly to reconnect automatically.
  5. To switch between PC/PS3 mode and XBOX360 mode, press SELECT + START keys simultaneously for 2 seconds.

5. Operation

5.1 Key Mapping Function (Android/Hongmeng/iOS)

For advanced key mapping and customization, download the "ShootingPlusV3" APP. Follow the official "Shooting Plus" WeChat account for detailed operating instructions.

QR code for ShootingPlus WeChat official account and connection tables for various modes.
Image: QR code for ShootingPlus official account and connection mode summary.

5.2 Macro Programming

The joystick supports macro programming for complex command sequences.

Diagram illustrating macro programming steps and TURBO function settings.
Image: Macro programming and TURBO function details.

5.2.1 Macro Extension Settings

  1. Press and hold the front programming key (usually located on the front edge of the joystick), then press the side M1 key. The indicator light will flash quickly, indicating setting mode. (M2 setting is similar).
  2. While in setting mode, press the desired sequence of keys (e.g., A, B, X, Y).
  3. Press the M1 key again to complete the programming. The indicator light will then stay on.

5.2.2 Macro Programming Clear

  1. Press the programming key + M1 key simultaneously. The Home key light will flash quickly.
  2. Do not press any other keys.
  3. Press the M1 key again to clear the previously set macro.

5.3 TURBO Function

The TURBO function allows for rapid, repeated input of a button press.

  • Enable TURBO: Press a desired key (e.g., "A") and then press the TURBO button. The key will now send repeated inputs.
  • Enable Automatic Continuous Firing: Press the same key (e.g., "A") a second time, then press TURBO. The key will automatically send inputs in succession without needing to hold it.
  • Disable TURBO: Press the key (e.g., "A") a third time, then press TURBO. The burst function will be turned off, restoring the key to its original state.
  • Adjust Continuous Firing Speed: When a key has automatic continuous firing enabled, press and hold TURBO + rocker up/down to cycle through speeds: 15 times/second, 25 times/second, or 8 times/second.

5.4 Sleep/Wake-up/Shutdown Function

  • Automatic Sleep: The joystick will automatically enter sleep mode if there is no key operation within 5 minutes.
  • Wake-up: To resume use, press the HOME key to wake up the joystick and reconnect it to your device.

6. Maintenance

6.1 General Care

  • Keep the joystick clean and free from dust.
  • Avoid exposing the device to extreme temperatures or direct sunlight.
  • Store in a dry place when not in use.

6.2 Cleaning

Wipe the surface of the joystick with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Ensure no moisture enters the device. The non-slip pads on the bottom can be cleaned with a bit of water to restore their stickiness.

7. Troubleshooting

7.1 Joystick Stuck

If the joystick becomes stuck in a non-upright position:

Three-step solution for a stuck joystick: 1. Grasp the game joystick. 2. Push the joystick to the middle position. 3. Press the joystick down with a slight force.
Image: Steps to resolve a stuck joystick.
  1. Grasp the game joystick.
  2. Push the joystick to the middle position.
  3. Press the joystick down with a slight force.

7.2 Connectivity Issues

  • Mobile Phone System Compatibility: Due to variations in mobile phone systems, some devices may not fully support this joystick.
  • Game Platform Updates: Software upgrades or source code changes by official game platforms may cause some games to be incompatible with this product. This is beyond the manufacturer's responsibility.
  • Reconnection: If connection is lost, try pressing the HOME button to automatically reconnect.

8. Specifications

Product Specifications
FeatureDetail
Model NumberJT01
TypeJoysticks
Interface TypeUSB, Bluetooth
Compatible PlatformsPC, Android, iOS, Switch, PS3, PS4, PS5 (PS4 games only on PS5)
CertificationCE
Working VoltageDC3.7V
Working Current<35mA
Duration>10H
Sleep Current<5uA
Charging Voltage/CurrentDC5V/500mA
Bluetooth Transmission Distance<=8M
Standby Time30 days at full power

8.1 Product Dimensions

Diagram showing the dimensions of the joystick: Length 14.4 cm (4.33 inch), Width 11 cm (4.33 inch), Height 6 cm (2.36 inch).
Image: Physical dimensions of the joystick.
  • Length: 14.4 cm (approximately 4.33 inches)
  • Width: 11 cm (approximately 4.33 inches)
  • Height: 6 cm (approximately 2.36 inches)

9. User Tips

Based on user experiences, here are some helpful tips for using your VILCORN JT01 Arcade Gaming Joystick:

  • The joystick offers smooth and precise control, which is often preferred over clicky arcade sticks.
  • It is highly recommended for fighting games like Street Fighter and Mortal Kombat, as well as other 2D fighter titles.
  • The non-slip pads on the bottom are effective; if they lose stickiness, a quick wipe with a damp cloth can restore them.
  • Be aware that the joystick is compact in size, which makes it portable but might feel small to some users.
  • The included phone holder may make the controller top-heavy and is not easily adjustable. Consider alternative phone stands for extended mobile gaming sessions.
  • The joystick is generally easy to set up and recognized quickly by compatible devices.

10. Frequently Asked Questions (FAQ)

Q: Is this joystick compatible with PS5?
A: Yes, it is compatible with PS5, but please note that only PS4 games can be played on the PS5 console using this joystick. The touchpad function is not available for PS5.
Q: Does it work with retro consoles like Super Console X?
A: The joystick officially supports PC, Android, iOS, Switch, PS3, and PS4. For retro consoles, it may work if they support one of these connection types (e.g., USB or Bluetooth HID mode) or through PC emulation.
Q: Does it include a dongle for 2.4G wireless connection?
A: Yes, a 2.4G wireless receiver (dongle) is required and typically included for 2.4G wireless mode on PC.
Q: Is it compatible with Street Fighter 6 on PS5?
A: While the joystick supports PS5 for PS4 games, compatibility with specific PS5 titles like Street Fighter 6 may vary. The manual notes that due to software upgrades or source code changes, some games might not connect. We recommend checking the game's specific controller support.
Q: Is it compatible with PS2?
A: The manual does not list direct compatibility with PS2. It supports PS3, PS4, and PS5.

11. Warranty and Support

For a comprehensive guide and additional support, please refer to the official PDF user manual available at: VILCORN JT01 User Manual (PDF).

For warranty information and customer service, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.