Important Safety Instructions
Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Avoid dropping.
- Do not disassemble.
- Do not submerge in water.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not place dangerous items on top of this device (e.g., liquid filled objects, lit candles).
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
- The adapter should be installed near the device and should be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
- Do not place combustible materials on the product.
- Keep the product out of direct sunlight and open flames, hot appliances, or any other heat sources.
Proper Disposal Instructions
This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
FCC Regulatory Compliance
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Warnings
- Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- WARNING: The adapter plug is used as disconnect device, the disconnect device shall remain readily operable.
- Frequency: 2.402GHz-2.48GHz
- The Max. transmit power: 10 dBm
ISED Warnings
This device contains licence-exempt transmitter (s) / receiver (s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS (s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and ompliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ouémetteur. Cet équipe-ment devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
Package Contents
The ULTIMEA Aura A60 package includes the following items:
- 1x Subwoofer
- 1x Soundbar
- 4x Surround Speakers
- 1x Soundbar Power Adaptor
- 1x Surround Speaker Power Adaptor
- 1x Rear Surround Cable (6m)
- 1x Digital Optical Cable
- 1x Front Left Surround Cable (2m)
- 1x Front Right Surround Cable (2m)
- 1x Remote Control
- 1x Wall Mount Kit
- 1x Wall Bracket
- 6x Mounting Screws for Speakers
- 1x HDMI Cable
- 1x User Manual (PDF) - View PDF
Soundbar Controls and Remote Control Functions
Soundbar Control Panel
- Power Button (U): Press to power on / standby.
- Source Button (→): Press to switch source: eARC-OPT(OPTICAL)-BT-AUX-USB.
- Bluetooth Button (&B): Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and choose to connect to a new device manually.
- Volume Down (-): Decrease volume.
- Volume Up (+): Increase volume.
Remote Control Functions
The remote control provides comprehensive control over your soundbar's features:
- Power Button (U): Press to power on / standby.
- LED Dimmer (*): Adjust display brightness in 5 levels. Hold for 3s to turn off.
- eARC Button: Switch to HDMI eARC source.
- OPT Button: Switch to OPTICAL source.
- AUX Button: Switch to AUX source.
- BT Button (&B): Switch to BLUETOOTH source.
- USB Button: Switch to USB source.
- EQ Reset Button: Restore EQ to default settings.
- Xupmix Button (&x2713;): Turn on/off Ultimea Xupmix sound.
- Volume Up (+): Increase volume.
- Volume Down (-): Decrease volume.
- Previous Track (<): Skip to previous track (BT and USB mode only).
- Next Track (>): Skip to next track (BT and USB mode only).
- Play/Pause (>II): Play/Pause (BT and USB mode only).
- Mute Button (&x2190;): Mute sound.
- Device Reset (&x21ba;): Hold for 5 seconds to initialize the device.
- BASS MX Button: Adjust bass level (display shows "B5-6" to "B5 6").
- MIDRANGE Button: Adjust alto level (display shows "MR-6" to "MR 6").
- TREBLE Button: Adjust treble level (display shows "TB-6" to "TB 6").
- MOVIE Button: Switch to MOVIE mode (display shows "MOVI").
- MUSIC Button: Switch to MUSIC mode (display shows "MUSC").
- VOICE Button: Switch to VOICE mode (display shows "VOIC").
- SPORT Button: Switch to SPORT mode (display shows "SPRT").
- GAME Button: Switch to GAME mode (display shows "GAME").
- NIGHT Button: Switch to NIGHT mode (display shows "NIGT").
- SURROUND Button: Adjust surround sound level (display shows "SR-6" to "SR 6").
- PROMPT TONE Button: Adjust prompt tone level (display shows "PT 0" to "PT 3").
Setup and Installation
Connecting to Your TV
Ensure your TV's HDMI port supports eARC to transmit Dolby Atmos audio format to your Soundbar.
- eARC/ARC Connection:
- Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
- Connect the other end into the eARC port of the soundbar.
- Press the "eARC" button on the remote control to select "eARC" input.
- If watching a movie in Dolby Atmos format, set TV audio output to Pass Through (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
- If watching a movie in DTS format, set TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
Note: Turn on the "CEC" function on your TV. When eARC/ARC is connected, your TV remote can control the soundbar and TV simultaneously (turn on/standby, adjust volume).

Diagram showing eARC/ARC connection from TV to soundbar and remote control selection.
- Optical Connection:
- Make sure the TV's port is OPTICAL OUT. Connect both sides of the optical cable to the OPTICAL ports on both the TV and the soundbar.
- Ensure the optical plug is inserted correctly. Do not insert the plug upside down to avoid damage.
- If there is no sound, try setting the TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
- AUX Connection:
- Connect a 3.5mm to RCA audio cable (not included) to your TV's RCA AUDIO OUT port.
- Ensure the color of the cable ends matches the color of the TV ports.
Note: If audio is playing from the internal TV speakers, mute or minimize the TV volume. Remember to unplug the AUX cable from TV and Soundbar when you want to switch other modes.

Diagram showing Optical and AUX connections to a TV.
Speaker Connections
- Subwoofer Connection:
The subwoofer and soundbar are connected via a wired connection. Simply connect the wire from the back of the subwoofer to the SUB OUT port on the Soundbar.

Diagram showing subwoofer connection to the soundbar.
- Surround Speaker Connection:
The front surround speakers are connected to the Soundbar via wired connections using the front surround cables (FR & FL). The rear left and right surround speakers connect with the rear surround cable, and the rear right surround speaker connects to the power supply. When the Soundbar is powered on, the surround speakers will automatically pair. A steady indicator light on the rear right surround speaker indicates successful pairing.
Manual Pairing: Hold the Surround button on the remote for 5 seconds (display shows "SUR" and flashes). Hold the Pair button on the right surround for 5 seconds (indicator light flashes quickly). After successful pairing, the indicator light will remain steady.

Diagram showing front and rear surround speaker connections.
Bluetooth Connection
- Press the Bluetooth button (&B) on the soundbar or remote control to enter Bluetooth pairing mode.
- Open your phone's Bluetooth settings, find and select "Ultimea Aura A60" to connect the soundbar.
- If the soundbar is already in Bluetooth mode and connected, press and hold the Bluetooth button (&B) for 3 seconds to disconnect the current device and connect to a new device manually.
Placement Recommendations
For an optimal listening experience, position the entire system as shown in the diagram below, ensuring the soundbar is centered with your TV and surround speakers are appropriately spaced for a full 360° surround effect.

Diagram illustrating optimal 360-degree surround sound speaker placement in a living room setting.
Wall Mount Installation
The wall mount bracket used for the surround speakers is identical to that for the soundbar. Therefore, the vertical hole spacing and installation method are the same for both.
Follow the diagrams provided in the user manual for proper wall mounting of the soundbar and surround speakers.
Operation
The ULTIMEA Aura A60 offers various sound modes and equalization settings to enhance your audio experience. You can control these settings via the remote control or the dedicated app.
Sound Modes and EQ Presets
Utilize the remote control buttons (MOVIE, MUSIC, VOICE, SPORT, GAME, NIGHT) to quickly switch between optimized sound profiles for different content types. The soundbar also features a 10-band equalizer and 121 preset EQ matrices accessible via the app for fine-tuning your audio.
Demonstration of the ULTIMEA Aura A60 7.1 Channel Surround Sound System with Dolby Atmos, app control, and various EQ presets.
App Control
Download the "ULTIMEA" app from Google Play or Apple Store to access advanced features like the 10-band equalizer settings and 121 preset EQ matrices for personalized sound customization.
Care and Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Aura A60 soundbar system, follow these care guidelines:
- Cleaning: Use a dry, soft, lint-free cloth to clean the surfaces of the soundbar, subwoofer, and surround speakers. Do not use any corrosive cleaners, waxes, or oils, as these can damage the finish.
- Avoid Liquids: Keep all components away from liquids. Do not expose the system to dripping or splashing water.
- Ventilation: Ensure proper ventilation around the soundbar and subwoofer. Do not block any ventilation openings.
- Temperature: Operate the system within the recommended temperature range of 41°F/5°C to 95°F/35°C.
- Storage: When not in use for extended periods, store the system in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your ULTIMEA Aura A60 soundbar, refer to the following common solutions:
- No Power: Ensure the power adaptors are securely connected to the soundbar, surround speakers, and a working power outlet. Check if the power button on the soundbar or remote is pressed.
- No Sound:
- Verify the correct input source (eARC, Optical, AUX, BT, USB) is selected on the soundbar.
- Check all cable connections (HDMI, Optical, AUX) between the soundbar and TV.
- If using Optical mode and there's no sound, try setting the TV audio output to PCM.
- Ensure the TV volume is not muted or too low.
- If using Bluetooth, ensure the device is properly paired and connected.
- Distorted Sound:
- Check the audio source for quality issues.
- Adjust the volume levels on both the soundbar and your TV/device.
- Try resetting the EQ settings to default using the remote control.
- Bluetooth Pairing Issues:
- Ensure the soundbar is in Bluetooth pairing mode.
- If already connected to another device, hold the Bluetooth button for 3 seconds to disconnect and enter pairing mode for a new device.
- Ensure your device's Bluetooth is enabled and within range.
- Surround Speakers Not Pairing:
- Ensure all surround speakers are powered on and correctly connected.
- If automatic pairing fails, perform manual pairing by holding the Surround button on the remote for 5 seconds, then holding the Pair button on the right surround speaker for 5 seconds.
- Remote Control Not Working:
- Check and replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the soundbar.
If the issue persists after trying these steps, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | U2621 |
| Power Supply | 24V ⇒ 3A, 14V ⇒ 1A |
| Drivers | 2" x 3 (Soundbar) + 2" x 4 (Surround) + 4" x 1 (Subwoofer) |
| Frequency Response | 65Hz-20KHz |
| Input Power (W) | 300-399 W |
| PMPO | 350W |
| Speaker Maximum Output Power | 350W |
| Standby Power | <0.5W |
| Operating Temperature | -10°C - 45°C / 14°F - 113°F |
| Bluetooth Version | 5.3 |
| Channels | 8 (7.1) |
| Audio Output Mode | Surround |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 4 |
| Communication | AUX, Optical Input, USB, Bluetooth, HDMI-Compatible |
| Input/Output | ARC |
| Dolby Atmos | YES |
| Sound Mode | Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, Sleeping Mode, Standard Mode, Game Mode, 3EQ Modes |
| Control | Volume control, EQ, Input selector |
| Display Screen | Yes |
| Built-in Microphone | Yes |
| Waterproof | No |
| Support APP | Yes |
| Material | Plastic |
| Inbox adaptor | Yes |
| Remote Control | Yes |
| Certification | CE, FCC, RoHS |
| Soundbar Dimensions (W x H x D) | 400 x 65 x 100 mm (15.7" x 2.6" x 3.9") |
| Subwoofer Dimensions (W x H x D) | 140 x 220 x 195 mm (5.5" x 8.7" x 7.7") |
| Surround Speaker Dimensions (W x H x D) | 82 x 88 x 81 mm (3.2" x 3.5" x 3.1") |
| Net Weight | 4.96kg / 10.93lbs |
| Gross Weight | 5.85kg / 12.9lbs |
User Tips
- Optimize Speaker Placement: Experiment with the placement of your surround speakers to find the optimal configuration for your room, ensuring an immersive audio experience.
- App Customization: Take advantage of the ULTIMEA app's 10-band equalizer and preset EQ matrices to fine-tune the sound to your personal preferences for different types of content.
- CEC Functionality: Enable the CEC function on your TV to allow a single remote control to manage both your TV and soundbar for convenience.
Warranty and Support
Declaration of Conformity
Manufacturer: Ultimea Technology (Shenzhen) Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000
The product, ULTIMEA Aura A60 7.1 Channel Dolby Atmos Soundbar (Model No.: U2621), conforms with the essential requirements set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/65/EU). The following standards were applied:
- EN 55032:2015/A1:2020
- EN 55035:2017/A11:2020
- EN IEC 61000-3-2:2019/A1:2021
- EN 61000-3-3:2013/A2:2021
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-17 V3.2.4 (2020-09)
- ETSI EN 300 328 V2.2.2 (2019-07)
- EN 50663: 2017
- EN IEC 62368-1:2020+A11:2020
- IEC 62321-3-1:2013
- IEC 62321-4:2013+A1:2017
- IEC 62321-5:2013
- IEC 62321-6:2015
- IEC 62321-7-1:2015
- IEC 62321-7-2:2017
- IEC 62321-8:2017
Full Name: Yoyo.Yu
Position: Approbation Manager
Place/Date: Shenzhen, China / Sep. 26-2024
Customer Support
If you require support or have any questions, please reach out to our service team:
- Email: support@ultimea.com
- Phone (US): +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- Phone (EU): +49 89-628-25828 (Mon-Fri 9am-5pm CET)
You can also visit support.ultimea.com for more information.
