PowerMotor OC173-1

Contents

PowerMotor GY6 Motorcycle Oil Cooler Radiator User Manual

Model: OC173-1 | Brand: PowerMotor

1. Product Overview

This manual is intended to provide basic usage guidelines for the PowerMotor GY6 Motorcycle Oil Cooler Radiator (Model OC173-1), a universal engine cooling accessory designed for motocross, racing, and dirt bikes. It covers proper installation, use, and maintenance to ensure optimal engine performance and longevity. Due to the wide variety of motorcycle accessories, specific details may vary depending on the product type, but the following guidelines will help you properly install, use, and maintain this accessory.

2. Safety Warnings

  • Read and Understand: Before using any accessories, please read this manual and any specific guide that comes with the product in detail.
  • Professional Installation: Unless you have the corresponding skills, it is recommended that professional technicians install this oil cooler.
  • Suitability: Make sure the accessories match your motorcycle model, year, and specifications. This oil cooler is designed for GY6 engines with M12 oil ports.
  • Personal Protection: Wear appropriate protective equipment (e.g., gloves, eye protection) when installing or replacing accessories.
  • Comply with Regulations: Make sure all accessories comply with local traffic regulations.
  • Avoid Incompatible Accessories: Do not use accessories that are incompatible with your motorcycle or this oil cooler.
  • Professional Repair: If the accessories are damaged or the performance is degraded, please stop using them immediately and seek professional repair.

3. Specifications

FeatureDetail
Brand NamePowerMotor
Model NameOC173-1
MaterialAluminum
OriginMainland China
Overall Length160mm / 6.3 inches
Fin Width44mm / 1.73 inches
Height70mm / 2.76 inches
Mounting Bolt Spacing (center to center)125mm / 4.92 inches
Oil Port Diameter11mm / 0.433 inches (M12 thread)
Package Length15 cm
Package Width15 cm
Package Height5 cm
Package Weight0.35 kg

For a visual representation of the dimensions, please refer to the 'Media Gallery' section.

4. Installation (Setup)

The PowerMotor GY6 Motorcycle Oil Cooler Radiator is designed for universal fitment on GY6 engines with M12 oil ports. Proper installation is crucial for its effective operation and to prevent damage to your engine.

General Guidelines:

  • Professional Installation Recommended: Due to the critical nature of engine cooling systems, it is highly recommended that installation be performed by a qualified professional technician, especially if you do not possess the necessary skills.
  • Compatibility Check: Before installation, ensure that the oil cooler is compatible with your specific motorcycle model, year, and engine specifications (e.g., GY6 engine, M12 oil port threads).
  • Personal Protective Equipment: Always wear appropriate personal protective equipment, such as safety glasses and gloves, during the installation process.
  • Secure Mounting: Ensure the oil cooler is securely mounted in a location that allows for adequate airflow and does not interfere with other motorcycle components or rider movement.
  • Leak Check: After installation, perform a thorough check for any oil leaks before operating the motorcycle.

5. Operating Instructions

Once properly installed, the oil cooler operates automatically to help regulate your engine's oil temperature. No specific user interaction is required during operation.

  • Monitor Engine Temperature: While the oil cooler helps maintain optimal temperatures, it is always advisable to monitor your motorcycle's engine temperature gauge, especially during prolonged rides or in hot weather conditions.
  • Regular Checks: Periodically check the oil cooler and its connections for any signs of damage, leaks, or blockages that could impede its performance.

6. Maintenance

Regular maintenance of your oil cooler ensures its continued efficiency and extends its lifespan.

  • Cleaning: Keep the fins of the radiator clean from dirt, debris, and insects to ensure maximum heat dissipation. Use compressed air or a soft brush to gently remove obstructions. Avoid using high-pressure water jets directly on the fins, as this can bend them.
  • Inspect Hoses and Connections: Regularly inspect all oil lines, hoses, and connections for cracks, wear, or leaks. Tighten any loose connections.
  • Check Mounting: Ensure the oil cooler remains securely mounted to the motorcycle frame. Check mounting bolts and brackets for tightness.
  • Oil Level: Ensure your engine oil level is always within the recommended range, as the oil cooler adds to the overall oil capacity of the system.

7. Troubleshooting

If you experience issues with your oil cooler or suspect degraded performance, follow these steps:

  • Reduced Cooling Performance: Check for blockages in the radiator fins, kinks in oil lines, or low engine oil levels. Ensure proper airflow to the cooler.
  • Oil Leaks: Immediately identify the source of any oil leaks. Check all connections, hoses, and the cooler body for damage. Tighten loose fittings.
  • Physical Damage: If the oil cooler is physically damaged (e.g., bent fins, cracked housing), it may need to be replaced.
  • Professional Repair: If the accessories are damaged or the performance is degraded, please stop using them immediately and seek professional repair. Do not attempt to repair critical components if you lack the expertise.

8. User Tips

  • Always use the recommended type and viscosity of engine oil for your motorcycle, as specified by the manufacturer.
  • After installing the oil cooler, run the engine for a few minutes and then re-check the oil level, topping up if necessary. The cooler will add to the system's oil capacity.
  • Consider adding a small amount of thread sealant to the M12 oil port threads during installation to help prevent leaks, but ensure it is oil-resistant and compatible with your engine.

9. Warranty & Support

For detailed warranty information, specific installation guides, or further technical support, please refer to the official user manual PDF provided by the manufacturer. You can typically find this document on the product's support page or by contacting PowerMotor customer service.

If you encounter any issues that cannot be resolved using the troubleshooting steps, it is always best to consult with a certified motorcycle mechanic or the product manufacturer for assistance.

A comprehensive user manual (PDF) is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.