KUNGKIC Subaru BRZ Toyota GR86 2021-2025 Side Clearance Marker Light

Contents

KUNGKIC Side Clearance Marker Lights User Manual

Model: For Subaru BRZ / Toyota GR86 (2021-2025)

Brand: KUNGKIC

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your KUNGKIC Side Clearance Marker Lights. These lights are designed to enhance the visibility and aesthetic of your Subaru BRZ or Toyota GR86 (model years 2021-2025). Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Important Safety Information & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Product Compatibility

These side clearance marker lights are specifically designed for:

  • Subaru BRZ (2021-2025)
  • Toyota GR86 (2021-2025)

Important Compatibility Note:

This product is only suitable for vehicles with original turn signals that have a yellow housing. If your original car has a white housing turn signal, this product is not applicable.

Product compatibility diagram showing yellow housing as compatible and white housing as incompatible
Diagram illustrating compatibility with yellow housing turn signals only.

4. Specifications

Feature Detail
Item Type Turn Signal / Side Clearance Marker Light
Voltage Others (Standard automotive 12V)
Material Durable ABS (Smoky colored shell option available)
Waterproof Rating IP67
Lens Options Clear Lens, Smoke Lens
Package Length 20 cm
Package Width 10 cm
Package Height 5 cm
Package Weight 0.15 kg
Origin Mainland China
Image showing IP67 waterproof rating for the side marker light
The lights feature an IP67 waterproof rating for durability.
Close-up of the smoky colored shell side marker light, highlighting durable ABS material
Durable ABS material with a smoky colored shell option.

5. Setup and Installation

Installation of the side clearance marker lights is generally straightforward. We recommend watching the official installation video for a visual guide.

5.1 Tools Required

  • Plastic pry tool
  • Wrench (for fender liner fasteners)

5.2 Installation Steps

  1. Carefully use a plastic pry tool to remove the existing side marker light from the fender.
  2. Disconnect the wiring harness from the original light.
  3. Connect the wiring harness to your new KUNGKIC Side Clearance Marker Light.
  4. Test the light function to ensure it illuminates correctly.
  5. Secure the new light into the fender opening, ensuring it snaps firmly into place.
  6. Re-secure any fender liner fasteners that may have been removed during the process.
Official installation video demonstrating the process of replacing the side marker lights.
Image showing a person using a pry tool to remove the original side marker light from a car fender
Carefully prying out the original side marker light.
Image showing different styles of side marker lights, black shell and transparent, installed on a car
Available product styles: Black shell and Transparent.

6. Operating Instructions

Once installed, the KUNGKIC Side Clearance Marker Lights will operate in conjunction with your vehicle's existing lighting system. They are designed to function as side clearance markers, providing additional visibility for your vehicle.

  • The lights typically activate when your vehicle's parking lights or headlights are turned on.
  • Some models feature a sequential light pattern upon startup, enhancing visual appeal.
KUNGKIC side clearance marker lights installed on a blue Subaru BRZ / Toyota GR86
The side marker lights illuminated on a vehicle.

7. Maintenance

To ensure the longevity and optimal performance of your side clearance marker lights, follow these simple maintenance guidelines:

  • Cleaning: Regularly clean the surface of the lights with a soft cloth and mild automotive cleaner. Avoid abrasive materials or harsh chemicals that could damage the lens.
  • Inspection: Periodically inspect the lights for any signs of damage, cracks, or loose connections. If any damage is observed, replace the unit promptly.
  • Wiring: Ensure all wiring connections remain secure and free from corrosion.

8. Troubleshooting

If you encounter issues with your KUNGKIC Side Clearance Marker Lights, refer to the following common troubleshooting steps:

8.1 Lights Not Illuminating

  • Check Connections: Ensure the wiring harness is securely connected to the light and the vehicle's electrical system.
  • Vehicle Lights On: Verify that your vehicle's parking lights or headlights are turned on, as the marker lights operate in conjunction with these.
  • Compatibility: Double-check that your vehicle has the correct original turn signal housing (yellow) as specified in the compatibility section.
  • Fuse: Consult your vehicle's owner's manual to check the relevant fuse for the side marker lights.

8.2 Intermittent Operation

  • Loose Connection: Inspect all wiring connections for looseness or corrosion. Re-seat connections if necessary.
  • Wiring Damage: Check for any visible damage to the wiring.

8.3 Physical Damage

  • If the light unit itself is physically damaged (e.g., cracked lens), it should be replaced immediately to maintain functionality and waterproof integrity.

9. User Tips

  • The installation process is generally considered easy by users.
  • The sequential startup animation is a popular feature.
  • The lights are noted for being quite bright.
  • Always inspect your product upon arrival for any minor damage, even if not immediately noticeable.

10. Warranty and Support

For product support, warranty inquiries, or technical assistance, please contact the manufacturer or their authorized representative:

10.1 Manufacturer Information

  • Manufacturer: Guangzhou Peishang International Trade Co.,Ltd
  • Address: CN-Tianhequ, kemulangbeipingshipaidongjie3hao 119Guangzhou Guangdong
  • Email/Tel: airspeed_kid@outlook.com

10.2 EU Authorized Representative

  • Representative: SUCCESS COURIER SL
  • Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Feemlabrada, Madrid, 28947 Spain
  • Email: successservice2@hotmail.com
  • Tel: +34910602659

11. Compliance Information

This product bears the CE mark, indicating its conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).

CE

NOTE: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.