1. Important Safety Instructions
Before using this product, please read all instructions and warnings in this manual and on the product itself. Failure to follow these instructions may result in electric shock, fire, or injury.
General Warnings:
- Stay away from pacemakers, defibrillators, credit cards, and electronic storage media.
- This product is not intended for use by persons with physical, sensory, or intellectual disabilities, or by persons without relevant experience and knowledge (including children), unless supervised or instructed by a guardian.
- Do not use this product as a toy. Keep out of reach of children.
- If used in a bathroom, always unplug after use. Water and electricity are a dangerous combination.
- Do not use in baths, wash basins, or other water containers.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its service agent, or qualified personnel.
- This product is equipped with a non-self-resetting thermal safety cut-off device to prevent overheating. If the product cuts off, unplug it from the main power socket to reset.
- To avoid accidental resets, do not power this product via external switch devices (timers, meters, etc.), or connect it to a circuit that opens and closes at regular intervals.
- Do not plug into outlets with unstable power.
- For additional protection, a residual-current device (RCD) with a rated leakage current not exceeding 3 mA is recommended. Consult an installer.
- Use this product only for drying and styling hair.
- Do not touch the plug or any part of the product with wet hands.
- When disconnecting, pull the plug itself, not the cable. Do not use extension cables.
- Do not pull or place heavy objects on the power cord. Keep the power cord away from heated surfaces. Do not wind the power cord around the product.
- Do not use lubricants, detergents, polishes, or air fresheners on any parts of this product.
- Contact customer service for maintenance or repair. Do not attempt to disassemble the product; improper disassembly may cause electric shock or fire.
- If the product does not operate as designed, is severely impacted, falls, is damaged from a height, is placed outdoors, or in water, do not use and contact customer service.
Caution: The exhaust port and metal ring may become hot during use. Allow to cool before touching.
2. Product Overview & Setup
Your Tinsol X9 Multi-function Hair Styler is designed for versatile hair styling, offering multiple attachments for drying, curling, and smoothing.
Package Contents:
- Main Styler Unit
- Curling Drums (e.g., 30mm, 40mm)
- Smooth Comb Attachment
- Cylindrical Comb Attachment
- Anti-flying and Drying Hair Nozzle
- User Manual (this document and a detailed PDF)
Attaching Accessories:
To attach any accessory, align it with the main unit and gently rotate until it clicks securely into place. Ensure the accessory is firmly attached before use.
For the Anti-flying and Drying Hair Nozzle: Use as shown in the diagram. Do not point the arrow in the wrong direction, as this can lead to blockage of the vent and improper function. Always ensure the arrow is in the correct position.

Figure 1: Attachment and Nozzle Direction Guide
Power Connection:
Ensure your local voltage matches the product's requirement (210-240V, 50Hz). Insert the plug firmly into a suitable power outlet. This product is available with EU, UK, or KR plug standards.
3. Operating Instructions
Controls:
- Power Switch: Turns the device on/off.
- Temperature Setting: Select between High Temperature, Medium Temperature, or Cold Air.
- Wind Speed Setting: Adjust airflow to Fast, Medium, or Mild.
- One-Click Cold Air: Provides an instant blast of cold air to set your style.
Styling with Attachments:
The Tinsol X9 features intelligent temperature control technology and a powerful digital motor to prevent thermal damage and provide precise airflow.

Figure 2: Intelligent Temperature Control & Digital Motor
- Curling Drums (30mm/40mm): These newly upgraded drums are suitable for both front and back curly hair. You can curl your hair in both clockwise and counter-clockwise directions without needing to change the roll, creating fuller, wavier looks faster. This allows you to curl more hair per pass and complete long hair styling quickly.
- Smooth Comb Attachment: This newly designed comb provides enhanced control of the Kangda effect airflow, making it easier to adsorb hair. It dries and shapes hair up to 5 times faster, creating smooth and straight styles.
- Cylindrical Comb Attachment: Wrap your hair around this comb to create a fluffy, voluminous effect.
- Anti-flying and Drying Hair Nozzle: This versatile nozzle offers multiple functions including drying, smoothing, and hiding flyaways. In dry hair mode, it provides a concentrated DC airflow to quickly dry hair and prepare it for styling.

Figure 3: Bi-directional Curling Drum

Figure 4: Smooth Comb in Action
Wet to Dry Styling:
The styler utilizes strong airflow from its digital motor to style wet hair. This process breaks and restructures hydrogen bonds in hair during drying, reducing reliance on high temperatures. This method helps maintain hair toughness, reduces moisture loss, and results in a glossy appearance.

Figure 5: Wet to Dry Styling Principle

Figure 6: Hair Health Benefits
4. Maintenance
Cleaning the Filter:
Regular cleaning of the filter is essential for optimal performance. It is recommended to clean the filter once a week to once a month, depending on usage.
- Locate the exhaust port at the bottom of the handle. Note that the filter cannot be entirely removed due to its connection with the power cord.
- Use a soft brush to gently remove dust and debris from the filter mesh.
- To detach the filter cover for deeper cleaning, align the red dot on the filter with the white dot on the handle and press the two buttons together to release.
- After cleaning, reattach the filter cover by aligning and pressing until it clicks into place.
General Care and Storage:
- Always unplug the styler and allow it to cool completely before cleaning or storing.
- Wipe the main unit and attachments with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Store the styler and its attachments in a dry place, away from direct sunlight and extreme temperatures.
- Do not wrap the power cord tightly around the styler, as this can damage the cord.
5. Troubleshooting
- Styler Not Turning On: Ensure the power cord is securely plugged into a working outlet. Check if the power switch is in the 'On' position.
- Styler Overheating and Shutting Off: The device has a thermal safety cut-off. Unplug the styler from the power socket and allow it to cool down completely before plugging it back in and resuming use. Ensure the filter is clean and not obstructed.
- Weak Airflow: Check the filter for any dust or hair buildup and clean it as described in the Maintenance section.
- Attachments Not Working Correctly (e.g., Nozzle Blockage): Ensure attachments are correctly aligned and securely fastened. For the anti-flying nozzle, verify the arrow is pointing in the correct direction to prevent blockage.
- Unusual Noises or Odors: Immediately unplug the device and discontinue use. Contact customer service for assistance.
6. Specifications
| Model Number | X9 |
| Brand Name | Tinsol |
| Power Source | Electric |
| Voltage | 210-240V |
| Rated Frequency | 50Hz |
| Max. Power | 1300W |
| Heating Element | Infrared |
| Type of Motor | AC |
| Number of Gears | 3 |
| Number of Nozzles | 3 - 4 |
| Plug Standard | EU (also UK, KR variants) |
| Function | Anion, Thermostatic, Hot/cold air, Temperature control |
| Portability | Unfoldable handle |
| Material | ABS |
| Certification | RoHS, CE |
| Package Dimensions | 37cm (L) x 25cm (W) x 11cm (H) |
| Package Weight | 1.337 kg |
7. User Tips
- Attachment Heat: Be aware that the attachments can get very hot during use. Handle with care and allow them to cool before changing or storing.
- Brush Attachment Benefits: Many users find the brush attachment excellent for achieving shiny and straight hair.
- Cord Management: The power cord is sturdy and long, offering good flexibility during styling.
- Lightweight Design: The main unit is relatively lightweight, making it comfortable to hold and maneuver during styling sessions.
- Thick Hair: This styler is effective for managing and styling thick hair volumes.
- Versatile Styling: You can achieve various hairstyles even without specific attachments, using the airflow direction.
- Temperature Control: The device offers a noticeable contrast between cold and hot airflow settings, allowing for precise styling and setting.
- Curly Hair Consideration: If you have very curly hair, the brush attachment might pull. Consider using a wide-tooth comb attachment if available or styling with other methods.
8. Warranty & Support
For any issues, malfunctions, or repair needs, please contact the seller or customer service. Do not attempt to disassemble or repair the product yourself, as this may void any applicable warranty and poses a safety risk.
For more detailed information, including specific warranty terms and conditions, please refer to the official PDF user manual available for download: View PDF User Manual