1. Safety Precautions
Please read and adhere to the following safety guidelines to ensure proper use and prevent damage to the device or injury to yourself.
- Do not disassemble or modify the device.
- Avoid contact with chemicals such as benzene and diluents.
- Keep away from strong magnetic or electric fields.
- Avoid direct sunlight or high temperatures.
- Do not use the player while riding a bicycle, driving a car, or motorcycle.
- Use headphones responsibly to avoid danger and avoid prolonged listening at high volumes to prevent hearing damage.
- Do not allow water or moisture to enter the device.
- Avoid frequently pressing the reset button next to the power button, as it may damage the system card under special circumstances.
2. Product Overview
2.1. Components and Controls
Familiarize yourself with the layout of your RGB20PRO console:
Image: Detailed diagram showing the front and back controls and ports of the RGB20PRO console.
- Front Controls: Cross Joystick (D-pad), Analog Joysticks, VOL+ / VOL- buttons, SELECT, START, A/B/X/Y buttons.
- Top Ports: Reset button, ON/OFF switch, OTG port, HD (HDMI) port, DC (Charging) port, TF Card Game slot.
- Bottom Ports: 3.5mm Headphone Jack.
- Back Features: L1/L2/R1/R2 Trigger Keys, TF Card OS slot, WiFi indicator.
Image: Back view of the RGB20PRO console, highlighting the OTG, HD, and DC ports, and the 5000mAh battery.
3. Setup
3.1. Initial Charging
Before first use, fully charge your RGB20PRO console. Use the factory-provided Type-C charging cable. Avoid using non-standard power charging cables to prevent low wattage or high voltage charging failures.
Image: Front view of the RGB20PRO console, emphasizing its 3.2-inch IPS OCA Full Fit screen with upgraded resolution.
3.2. TF Card Installation
The console supports TF cards for both the operating system (TF Card OS slot) and game storage (TF Card Game slot), with expandable storage up to 256GB. Ensure the TF cards are properly inserted into their respective slots.
Image: Diagram illustrating the built-in WiFi 2.4G + Bluetooth chip and support for TF cards up to 256GB.
4. Operation
4.1. Power On/Off
- Power On: Slide the ON/OFF switch to the 'ON' position.
- Power Off: From the main interface, press the START button, navigate to 'Quit', and select the shutdown option. Avoid directly pressing the power button to shut down, as this may lead to data loss or system card damage.
4.2. Main Interface Navigation
Upon powering on, you will enter the main interface. Use the D-pad or analog joysticks to navigate through the menus.
- Entering Main Menu: From the main interface, press START.
- Entering Game: Select a game from the simulator interface and press A (or the designated confirm button).
- Text Search Game: Use the text search function to find specific games.
4.3. In-Game Shortcut Keys
While in a game, specific key combinations provide quick access to various functions:
- SELECT + R1: Take a screenshot.
- SELECT + START: Enter the RetroArch (RA) backend menu.
- SELECT + X: Display/adjust frame rate.
- SELECT + Y: Access language settings.
- SELECT + L1: Adjust the save state slot.
- SELECT + R2: Save current game state.
- SELECT + L2: Load a saved game state.
- SELECT + Right Joystick: Access the emulator menu (for save/load/exit options).
4.4. Emulator Specific Menus
- PSP Emulator Menu: Press the right joystick to enter the PSP emulator menu. Here you can save/load game records and configure settings like frame skipping to address performance limitations.
- NDS Emulator Menu: For NDS games, press the right joystick to enter the emulator menu for save/load/exit options.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the console. Avoid abrasive materials or harsh chemicals.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device when the low battery indicator appears.
6. Troubleshooting
- Device Jams or Fails to Start: If the device becomes unresponsive or fails to power on, try restarting it. Ensure the system TF card is properly inserted.
- Low Battery Indication: When the battery is low, the device will prompt you to charge it. Connect the provided charger to charge the device.
- Game Performance Issues: For emulators like PSP, access the emulator-specific menu (usually via the right joystick) to adjust settings such as frame skipping to improve performance.
7. Specifications
| Feature | Specification |
|---|---|
| Display Size | 3.25 inches |
| Screen Type | IPS |
| Screen Resolution | 1024x600 |
| Operating System | Opendinglinux |
| Battery Capacity | 5000mAh |
| Charging Interface | Type-C |
| Expandable Storage | TF Card (32GB-256GB) |
| Input/Output | TF, MINI HDMI, 3.5mm Headphone Jack |
| Connectivity | WiFi, Bluetooth-compatible |
| Material | ABS |
| Dimensions (Depth x Height x Width) | 220mm x 60mm x 140mm |
| Games Included | 4000+ |
| Supported Languages | Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Swedish, Polish, Greek, Korean, Dutch, Latin American Spanish, Brazilian Portuguese, Simplified Chinese, Traditional Chinese Style |
| Supported Games Types | MAME/N64/PS/CP3/NEOGEO/GBA/NES/SFC/MD/NDS and more. |
| Certification | CE, FCC |
8. User Tips
- Always ensure game formats are compatible with the console's emulators for optimal performance.
- For best audio experience and to prevent hearing damage, adjust headphone volume to a comfortable level.
- Regularly check for system updates to ensure the best gaming experience and compatibility.
9. Warranty and Support
Your POWKIDDY RGB20PRO console comes with a product warranty card. Please refer to this card for detailed information regarding warranty coverage, terms, and conditions.
For further assistance or technical support, please contact your retailer or the manufacturer directly.
A digital version of the user manual is available for reference: User Manual (PDF)
Image: Display of included accessories: console, Type-C cable, and product instructions manual.