1. Introduction
The MatSee Plus ZigBee Energy Monitor (Model PJ-1203A) is a smart device designed to measure and monitor electricity consumption and generation in your home or facility. It supports 1 or 2 channels for bidirectional current sensing, providing real-time data through the Tuya Smart or Smart Life mobile applications. This manual provides detailed instructions for safe installation, setup, operation, and troubleshooting.
MatSee Plus ZigBee Energy Monitor with two current transformers (CTs).
2. Safety Information
2.1. Safety Installation
WARNING: Failure to follow these instructions may result in death or serious injury.
- The power clamp must be installed and serviced only by qualified electrical personnel.
- Do not touch the terminals of the device during testing.
- Turn off all the power supply for this equipment before installing.
- Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
- Always use a properly rated voltage sensing device to confirm power is off.
DANGER ELECTRIC SHOCK
2.2. Safety Handling
WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.
- Avoid high humidity or extreme temperatures.
- Avoid long exposure to direct sunlight or strong ultraviolet light.
- Do not drop or expose the unit to intense vibration.
- Do not disassemble or try to repair the unit on your own.
- Do not expose the unit or its accessories to flammable liquids, gases or other explosives.
2.3. Uninstalling the Clamp
WARNING: FOR SAFETY. If you need to remove the current transformer clamp, please be sure to turn off the power of the measuring device first, otherwise there is a risk of electric shock.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Model | PJ-1203A |
| Input Voltage | AC 100-240V 50/60Hz |
| Measuring Range | 0.2-80A |
| Wireless Protocol | ZigBee (2.4GHz) |
| Measurement Error | Within ±2% |
| Module Size | 50*45*23mm |
| Clamp Diameter | 10mm |
| Clamp Cable Length | 1m |
| Ambient Temperature Range | -10 °C to +55 °C |
| Certification | CE, RoHS |
| State of Assembly | Ready-to-Go |
| Compatibility | All Compatible (Tuya Smart, Smart Life) |
4. Package Contents
The package typically includes:
- MatSee Plus ZigBee Energy Monitor (Model PJ-1203A)
- Current Transformer(s) (CTs) (1 or 2 depending on model)
- DIN Rail Mounting Accessory
- Double-sided adhesive
- User Manual (PDF available online)
Available in 1-channel or 2-channel configurations.
5. Setup and Installation
5.1. Download the App
The MatSee Plus ZigBee Energy Monitor works with the Smart Life or Tuya Smart applications. Please scan the QR code below or search for 'Smart Life' or 'Tuya Smart' in your device's App Store (iOS) or Google Play/Android Market (Android).
Smart Life App
Tuya Smart App
5.2. Physical Installation and Wiring
IMPORTANT: Ensure the main power supply is OFF before performing any wiring. Installation should be performed by qualified electrical personnel.
The energy monitor is designed for 35mm DIN rail mounting. Attach the monitor to a standard DIN rail in your electrical panel.
35mm DIN Rail Mounting.
Connect the monitor according to the wiring diagram. The 'L' and 'N' terminals are for the main power supply to the module. The 'S1' and 'S2' terminals are for connecting the current transformer(s) (CTs).
Basic Wiring Diagram.
For measuring energy consumption and generation (e.g., with solar panels), follow the comprehensive wiring diagram. Ensure that the circuit measured by the CT is in the same phase as the circuit powered by the module.
Wiring Diagram for energy consumption and generation (e.g., with solar panels).
5.3. Adding the Meter to the App (ZigBee)
Note: ZigBee meters require a Tuya ZigBee Gateway to function properly and connect to the app.
ZigBee Meter connection diagram.
- Ensure your ZigBee Gateway is already set up and connected to the app.
- Open the Smart Life or Tuya Smart app.
- Navigate to your ZigBee Gateway device.
- Press the reset button on the energy monitor for about 5 seconds until the red LED indicator flashes quickly.
- In the app, select 'Add subdevice' under your ZigBee Gateway.
- Confirm that the LED is blinking quickly by selecting 'LED already blink' in the app.
- The app will search for and add the device. Once successfully added, click 'Done'.
5.4. Adding the Meter to the App (Wi-Fi)
If you have a Wi-Fi version of the meter, follow these steps:
- Open the Smart Life or Tuya Smart app.
- Press the reset button on the energy monitor for about 5 seconds until the red LED indicator flashes quickly.
- In the app, select 'Add Device' and choose 'Smart Electric Meter' (Wi-Fi).
- Select your 2.4 GHz Wi-Fi network and enter the password. (If your Wi-Fi is 5GHz, please set it to be 2.4GHz. Refer to common router setting methods if needed).
- Confirm that the indicator light is blinking quickly.
- The app will search for and add the device. Once successfully added, click 'Done'.
6. Operation
6.1. Monitoring Electricity Usage
Once the device is successfully added to the app, you can monitor various electricity parameters:
- Total Energy (Forward/Reverse)
- Voltage
- Frequency
- Total Power
- Current (per channel)
- Power (per channel)
- Power Factor
Electricity Statistics in the App (Day, Month, Year).
6.2. Bidirectional Measurement (Forward/Reverse)
The monitor supports bidirectional measurement, which is crucial for systems with energy generation (e.g., solar panels). The app will display 'Forward' for consumption from the grid and 'Reverse' for energy fed back to the grid.
IMPORTANT: Make sure the clamp is placed in the correct direction.
- If your solar system is actively generating, adjust the clamp's direction until the App shows 'Reverse'.
- If your solar system is not generating (e.g., at night), adjust the clamp's direction until the App shows 'Forward'.
- Perform this adjustment for each channel.
App display for Forward and Reverse energy flow.
7. Maintenance
- Keep the device clean and dry. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to dust, dirt, or moisture.
- Do not use harsh chemicals or abrasive cleaners.
- Regularly check wiring connections for tightness and signs of wear.
8. Troubleshooting & FAQ
Q: Why does the App show 'Current' and 'Power' as '0'?
A: This typically happens if the current transformer (CT) is not correctly sensing current. Ensure that:
- Only one device's wire (either live or neutral, but not both) is placed inside the clamp.
- The device connected to that wire is turned on and actively consuming power.
Correct clamp placement for current sensing.
Q: After changing the report rate to less than 10 seconds, the App seems stuck. What should I do?
A: This can occur if the network return is too slow to handle the increased reporting frequency. Please sign out of the App and re-enter. Then, change the report rate back to 10 seconds or higher. The default value of 10 seconds is generally stable.
Q: How do I clear the App's electricity data?
A: To clear accumulated electricity data:
- Quickly press the reset button on the device 5 times. The LED indicator should blink quickly. If it doesn't, repeat the action until it blinks quickly.
- After 10 seconds, go to the device's settings page in the App.
- Click on 'Disconnect and wipe data'.
9. User Tips
- Accuracy: The device is generally accurate for measuring wattage. Note that the manufacturer specifies accurate readings for currents from 1A and above.
- Home Assistant Integration: For advanced users integrating with Home Assistant (HA) via ZHA or Zigbee2MQTT, you might need to apply custom quirks or invert values in software if readings appear negative, especially for bidirectional measurements.
- Data Reporting Frequency: The data reporting frequency can typically be configured from 3 to 60 seconds, with 10 seconds being the default and recommended value for stability.
- ZigBee Router Functionality: As a continuously connected device, the energy monitor can act as a ZigBee router, extending your ZigBee network's range.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official MatSee Plus website or contact your retailer. A comprehensive user manual in PDF format is also available for download. You can access it via the following link: View User Manual (PDF)