DM DW95

Contents

DM DW95 9.5mm HDD/SSD Caddy User Manual

Expand your laptop's storage with ease

Introduction

The DM DW95 HDD Caddy is a versatile adapter designed to replace your laptop's optical drive (CD/DVD-ROM) with an additional 2.5-inch SATA hard disk drive (HDD) or solid-state drive (SSD). This allows you to significantly expand your laptop's storage capacity or improve performance by adding an SSD for your operating system while retaining your original HDD for data storage. This caddy is compatible with laptops featuring a 9.5mm thick optical drive bay and supports SATA 3.0 for high-speed data transfer.

Front view of the 9.5mm HDD Caddy
Front view of the DM DW95 9.5mm HDD Caddy.

Setup and Installation

Before beginning installation, ensure your laptop is powered off and disconnected from any power source. It is recommended to remove the battery for safety.

  1. Remove the Laptop Optical Drive: Carefully remove your laptop's existing optical drive. This usually involves unscrewing a single screw on the bottom or side of the laptop that secures the drive, then gently sliding it out.
    Step-by-step installation guide for the HDD Caddy
    Visual guide for installing the HDD/SSD into the caddy and then into the laptop.
  2. Prepare the HDD Caddy: Take the DM DW95 optical drive bracket. If your original optical drive had a custom faceplate, you might need to transfer it to the caddy. The caddy comes with a standard flat faceplate and often includes a small screwdriver and screws for installation.
    HDD Caddy with included screwdriver and screws
    The caddy typically includes a screwdriver and mounting screws.
  3. Insert HDD/SSD: Insert your 2.5-inch HDD or SSD into the optical drive bracket. Ensure the SATA connectors align correctly. Gently push the drive until it is firmly seated.
    Solid-state drive inserted into the HDD Caddy
    A 2.5-inch SSD properly seated within the caddy.
  4. Secure the Drive: Use the provided screws to secure the HDD or SSD within the caddy. This prevents movement and ensures a stable connection.
  5. Install the Caddy: Slide the assembled caddy into your laptop's optical drive bay. Push it in until it clicks into place or aligns with the screw hole. Secure it with the screw you removed earlier.
    HDD Caddy installed in a laptop optical drive bay
    The caddy seamlessly integrated into a laptop's optical drive bay.

Operating Instructions

Once the DM DW95 HDD Caddy with your chosen drive is installed, your laptop will recognize it as a secondary storage device. You can then:

  • Format the Drive: If it's a new drive, you will need to format it through your operating system's Disk Management (Windows) or Disk Utility (macOS) before it can be used.
  • Install Operating System: You can install an operating system on the SSD in the caddy for faster boot times and application loading.
  • Store Data: Use the drive for storing large files, backups, or applications.
  • Data Migration: Migrate your existing operating system to the new SSD for performance benefits.

Maintenance

The DM DW95 HDD Caddy requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the caddy and the installed drive free from dust and debris.
  • Avoid exposing the caddy to extreme temperatures or humidity.
  • Handle your laptop and the caddy with care to prevent physical damage.

Troubleshooting

If you encounter issues with your DM DW95 HDD Caddy, consider the following:

  • Drive Not Detected:
    • Ensure the HDD/SSD is securely seated within the caddy and the caddy is fully inserted into the laptop's optical drive bay.
    • Check your laptop's BIOS/UEFI settings to confirm that the SATA port for the optical drive is enabled.
    • Try connecting the HDD/SSD directly to another SATA port (if available) or using a different caddy to rule out drive or caddy failure.
    • For new drives, ensure they are initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).
  • Slow Performance:
    • Ensure your laptop's SATA controller supports SATA 3.0 if you are using a SATA 3.0 SSD.
    • Check for updated SATA drivers for your laptop.
    • Verify the drive's health using diagnostic tools.
  • Physical Fit Issues:
    • If the caddy's faceplate doesn't fit perfectly, minor trimming of excess plastic from the faceplate slots may be necessary for some laptop models.

Specifications

Feature Detail
Model Number DW95
Compatible Drive Type 2.5-inch HDD/SSD
Interface SATA 3.0
Caddy Thickness 9.5mm
Material Plastic
Approximate Weight 51 grams
Approximate Dimensions (L x W x H) 15 cm x 12 cm x 1 cm
Origin Mainland China
Package Contents HDD Caddy, Screws, Screwdriver, Standard Faceplate (contents may vary slightly)

User Tips

  • The plastic construction of this caddy is often preferred over metal versions by some users for its lighter weight and prevention of short circuits.
  • While screwing in the drive is recommended for stability, some users find it optional if the drive fits snugly.
  • If you are concerned about the rigidity of the plastic, some advanced DIY users have filled internal gaps with epoxy for a more solid feel.
  • Be aware that HDDs have small breather holes; while this caddy doesn't specifically account for them, drives typically function without issue.
  • This caddy has been reported to work well with specific laptop models such as the Lenovo G480, HP 15-ac165nf, MacBook Pro A1278 (2012), and T420.

Warranty and Support

For any warranty claims or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is also available for download: DM DW95 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.