Introduction
Thank you for choosing the ZUOYA GMK70 mechanical keyboard. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new split mechanical keyboard. The GMK70 features a hot-swappable design, Gasket mount, and supports QMK/VIA for advanced customization, offering a versatile and ergonomic typing experience.
The ZUOYA GMK70 Split Mechanical Keyboard, showcasing its hot-swappable design and RGB lighting.
Setup
1. Unboxing and Components
Upon unboxing, ensure all components are present. The kit typically includes the split keyboard base, connection cables, and a user manual. Please note that switches and keycaps are generally not included and must be purchased separately.
Typical contents of the GMK70 keyboard kit.
2. Product Structure
The GMK70 keyboard is designed with multiple layers for optimal performance and acoustics. Understanding its structure can aid in customization and maintenance.
Exploded view of the GMK70 keyboard components.
3. Connection Ports and Switches
Familiarize yourself with the connection points and mode switch on the keyboard.
Connection sockets and mode switch on the GMK70 keyboard.
4. Three-Mode Connection
The GMK70 supports wired, Bluetooth 5.0, and 2.4GHz wireless connections.
The GMK70 supports three connection modes for versatile use.
Wired Mode
- Insert the USB cable into your computer device.
- Ensure the toggle switch (located near the USB interface) is in the middle position for wired mode.
- The keyboard backlight will illuminate and display the default RGB effect, indicating a successful connection.
Bluetooth Pairing
To enter Bluetooth mode, move the toggle switch to the left (towards the USB interface).
- The ZUOYA GMK70 Bluetooth keyboard can connect to up to 3 Bluetooth devices simultaneously. Power on the keyboard (toggle switch to Bluetooth mode).
- Press and hold FN + Q, FN + W, or FN + E for 3-5 seconds. The corresponding Q, W, or E key will flash rapidly, indicating the keyboard is in pairing mode.
- On your device (computer, laptop, tablet), turn on Bluetooth, search for available devices, and select one of the following:
- GMK70-1 (for FN + Q)
- GMK70-2 (for FN + W)
- GMK70-3 (for FN + E)
- Click 'Connect' to pair.
- Once successfully connected, the Q, W, or E key will stop flashing.
- To switch between paired Bluetooth devices, short press FN + Q, FN + W, or FN + E.
- If the keyboard is powered off and then on again, it will automatically reconnect to the last used Bluetooth device.
2.4GHz Wireless Mode
- Move the toggle switch to the right for 2.4GHz wireless mode.
- Insert the 2.4GHz receiver into a USB port on your device. The keyboard should connect automatically.
- Forced Code Pairing (if connection fails): Long press FN + R. The R key's LED will flash continuously and rapidly. While it's flashing, insert the 2.4GHz receiver into your computer's USB port. The R key will stop flashing and restore its current backlight color upon successful pairing.
5. DFU Mode (Firmware Update)
DFU (Device Firmware Upgrade) mode is used for updating the keyboard's firmware.
- Left Keyboard Half: Turn off the power. Press and hold the ESC key, then insert the USB cable into the left keyboard's port. Alternatively, you can short-circuit the positioning hole behind the space bar key switch, then insert the USB cable.
- Right Keyboard Half: Remove the keycap from the ALT-R key. Move the toggle switch (located under the ALT-R key) to the bottom position. Then, short-circuit the positioning hole behind the space bar key switch, and insert the USB cable.
Important: After updating the firmware on the right keyboard half, ensure the toggle switch is moved back to the top position for normal operation.
Operating Instructions
1. Multimedia Keys
Use the FN key in combination with other keys to access multimedia and system functions:
- FN + A: Windows System Mode
- FN + S: Mac System Mode
- FN + 1 to FN + 0: F1 to F10
- FN + -: F11
- FN + =: F12
- FN + Left CTRL: Toggle between number pad and function area
- FN + F1: Music Player
- FN + F2: Volume Down
- FN + F3: Volume Up
- FN + F4: Mute
- FN + F5: Stop Playback
- FN + F6: Previous Track
- FN + F7: Play/Pause
- FN + F8: Next Track
- FN + F9: Mail
- FN + F10: Home Page
- FN + F11: Calculator
- FN + F12: Search
- FN + WIN: Lock/Unlock Windows Key
- FN + Y: Print Screen (PRTSC)
- FN + U: Scroll Lock (SCROLL)
- FN + I: Pause
- FN + H: Home
- FN + J: End
- FN + K: Page Up (PG UP)
- FN + L: Page Down (PG DN)
- FN + DELETE: Insert
2. LED Backlight Settings
The GMK70 features customizable RGB backlighting.
RGB backlighting in action on the GMK70.
- FN + [: RGB backlight brightness increase
- FN + ]: RGB backlight brightness decrease
- FN + ;: RGB backlight effect speed decrease
- FN + ': RGB backlight effect speed increase
- FN + ,: RGB backlight hue decrease
- FN + .: RGB backlight hue increase
- FN + X: Turn on/off RGB backlight
- FN + TAB: Switch LED light effect
- FN + M: RGB backlight saturation decrease
- FN + /: RGB backlight saturation increase
- FN + \: Adjust the effect of the LOGO LED
The rotary knob, which may also feature customizable lighting.
3. Automatic Sleep Mode
- After 5 minutes of no key operations, the backlight will turn off. Press any key to wake up the keyboard.
- After 30 minutes of no key operations, the keyboard will enter deep sleep mode, and Bluetooth will disconnect. Press any key to exit deep sleep mode; the RGB backlight will turn on, and Bluetooth will reconnect.
4. Charging and Battery Indicator
- When the keyboard battery level is low (below 3.5V), the FN key will continuously blink.
- To check the battery power: Press FN + B. Keys 1 through 0 will light up, representing 10% to 100% battery charge. Release FN + B to exit.
- To check charging status: Press FN + Left Space. If the FN key shows a red light, it is charging. If it shows a green light, it is fully charged. Release to exit.
Customization with QMK/VIA
The ZUOYA GMK70 supports QMK/VIA for advanced key layout changes and macro programming.
VIA Software Installation
Note: Ensure your keyboard is properly connected to your computer device via USB before proceeding.
- Visit https://github.com/WestBerryVIA/via-releases/releases to download and install the latest VIA software for your operating system.
- Download the ZUOYA GMK70 .JSON file from the official website (if available) or a community source and upload it to the VIA software. Open VIA, click 'Load' to import the JSON file.
- A successful connection will be indicated by the VIA software recognizing your keyboard. If VIA software does not recognize your keyboard, please contact customer support for assistance.
The keyboard's memory is persistent, meaning your settings will be remembered regardless of which computer it's plugged into.
Key Remapping
In the VIA software interface, select the key you wish to change in the upper section. Then, click the desired new function in the lower section of the VIA software to apply the change.
Layers
The GMK70 is configured with four layers (0-3) by default, allowing each key to have multiple functions. This is particularly useful for compact keyboards.
- Layer 0 (Default for Windows): Activated when the keyboard is connected to a Windows system (after pressing FN + A to switch to WIN system mode).
- Layer 1 (FN-activated for Windows): Activated by long-pressing the FN key when the keyboard is connected to a Windows system.
- Layer 2 (Default for Mac): Activated when the keyboard is connected to a Mac system (after pressing FN + S to switch to MAC system mode).
- Layer 3 (FN-activated for Mac): Activated by long-pressing the FN key when the keyboard is connected to a Mac system.
Macro Settings
While the GMK70 keys do not have pre-set macro keys, you can map custom macros to any key using the VIA software for quick operations.
Special Key Settings and Other Customization
VIA allows you to replace special keys with other functions and offers additional customization options for various function keys.
Maintenance
To ensure the longevity and optimal performance of your GMK70 keyboard, follow these simple maintenance guidelines:
- Cleaning: Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, remove keycaps and use compressed air to clear dust and debris from between the switches. A damp cloth (not wet) can be used for stubborn grime on keycaps and the case, ensuring no liquid enters the keyboard.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or excessive pulling on the cables to prevent damage.
- Hot-Swapping Switches: When replacing switches, use the provided switch puller tool. Apply gentle, even pressure to avoid damaging the switch sockets.
Troubleshooting
- Keyboard not recognized in VIA: Ensure the keyboard is properly connected via USB. If issues persist, try updating the VIA software or contacting customer support. Some users have found that updating to the latest firmware (e.g., v15) can resolve recognition issues.
- 2.4G Wireless Mode Bugs (e.g., modifier keys sticking): This can often be resolved by updating the keyboard's firmware to the latest version. Firmware flashing can be done on Linux by following QMK instructions for wb32 dfu.
- Bluetooth Connection Issues: Ensure the keyboard is in Bluetooth pairing mode (Q, W, or E key flashing). Check your device's Bluetooth settings and try re-pairing. If the keyboard was previously paired, ensure it's not trying to connect to an unavailable device.
- Keys not responding: Check if the switches are properly seated in their sockets. If using hot-swappable switches, ensure they are fully pushed in. Test with different switches if possible.
- RGB backlight not working: Check backlight settings using FN key combinations. Ensure the keyboard is not in sleep mode.
Specifications
| Feature | Specification |
|---|---|
| Keyboard Standard | 68 keys |
| Operation Style | Mechanical |
| Interface Type | USB, Bluetooth Wireless, 2.4G Wireless |
| Backlight Type | MULTICOLOR (RGB) |
| Switches Hot Swap | Yes |
| Full Size Keyboard | No |
| Wrist Support | No |
| Package | Yes |
| Battery Included | Yes |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Origin | Mainland China |
| Dimensions (L x W x H) | 41 cm x 15 cm x 5 cm |
| Weight | 0.969 kg |
User Tips
- Switches and Keycaps: Remember that the GMK70 kit typically does not include switches or keycaps, allowing for full customization.
- Ergonomics: The split design is excellent for improving typing posture and reducing shoulder stiffness. Experiment with the split angle to find what is most comfortable for you.
- VIA/Vial Software: Leverage the VIA/Vial software to remap keys, create macros, and customize layers to perfectly suit your workflow. If VIA functionality feels limited, consider using supplementary software like Kanata.
- Firmware Updates: If you encounter any bugs, especially in wireless modes, check for and install the latest firmware updates. These often resolve connectivity and key-sticking issues.
- Build Quality: The keyboard features a solid build quality with heavy cases and a supple cable connecting the halves, contributing to a premium feel.
- Magnetic Connection: The keyboard halves are magnetically connected, allowing them to be placed together or separated for ergonomic positioning.
- Stabilizers: The stabilizers are pre-lubed and serviceable, which is a great feature for enthusiasts looking for a smooth typing experience.
Warranty and Support
For detailed warranty information and further technical support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download: ZUOYA GMK70 User Manual (PDF).