YOSOO Oval Porthole Window

Contents

YOSOO Oval Porthole Window Instruction Manual

Model: Oval Porthole Window

1. Product Overview

The YOSOO Oval Porthole Window is designed for marine and recreational vehicle applications, providing light, ventilation, and protection from the elements. It features a sturdy construction with ABS, stainless steel, and tempered glass, along with an integrated insect screen.

YOSOO Oval Porthole Window, fully open, showing insect screen and inner frame.

Figure 1: Oval Porthole Window (Open View)

2. Setup and Installation

2.1 Package Contents

  • 1 x Oval Opening Portlight Window
  • 1 x Frame

2.2 Installation Instructions

The window is designed for inward opening. The fixed frame is installed on the exterior of the cabin, with the glass surface facing the interior of the cabin.

  1. Prepare the installation area by ensuring the surface is clean and flat.
  2. Carefully measure and cut the opening in your cabin wall according to the specified installation cut-out size (refer to specifications).
  3. Position the outer frame from the exterior of the cabin into the prepared opening.
  4. Align the main window unit from the interior side and secure it to the outer frame using appropriate fasteners (not included, typically screws suitable for your wall material).
  5. Ensure all seals are properly seated to guarantee a waterproof installation.
Exploded view of the Oval Porthole Window, showing the main window unit and the separate outer frame.

Figure 2: Exploded View of Window Components

Diagram showing detailed dimensions of the Oval Porthole Window, including overall size, inner opening, and cut-out size, with labels for lockout switch handle and insect protection net.

Figure 3: Window Dimensions and Cut-Out Guide

Note: Installation can be complex. It is highly recommended to seek assistance from a professional engineer or experienced installer to ensure proper and secure installation.

3. Operating Instructions

3.1 Opening and Closing

The window features a square design with a switch lock handle and a support rod. To open the window, disengage the lock handle and push the window outward. The support rod allows for adjustment of the opening angle from 0 to 180 degrees, providing flexibility for ventilation and enjoying the view. To close, pull the window inward until it seats firmly against the frame and engage the lock handle.

Oval Porthole Window installed on a boat, with text overlay 'equipped with locking fixing handles, insect repellent mesh and sturdy outer frame'.

Figure 4: Window with Locking Handles and Insect Screen

3.2 Insect Screen

The window is equipped with an integrated insect repellent mesh to prevent insects from entering the cabin while allowing airflow. The screen is fixed within the window unit and does not require separate operation.

4. Maintenance

4.1 Cleaning

  • Clean the ABS frame and tempered glass with mild soap and water. Avoid abrasive cleaners or solvents that could damage the materials.
  • Wipe the stainless steel components with a soft cloth and a suitable stainless steel cleaner if necessary.
  • Gently clean the insect screen with a soft brush or damp cloth to remove dust and debris.

4.2 Seal Inspection

Periodically inspect the rubber seals around the window for any signs of wear, cracking, or damage. Damaged seals can compromise the waterproof integrity of the window. Replace seals if necessary.

4.3 Hinge and Latch Lubrication

Apply a small amount of marine-grade lubricant to the hinges and latch mechanisms annually to ensure smooth operation and prevent corrosion.

5. Troubleshooting

  • Window does not close or seal properly: Check for any obstructions in the frame or on the seal. Inspect the seal for damage or misalignment. Ensure the locking handles are fully engaged.
  • Water leakage: Verify that the window is fully closed and locked. Inspect the seals for damage or improper seating. Check the installation around the outer frame for any gaps or compromised sealant.
  • Stiff operation of hinges/latches: Apply lubricant as described in the Maintenance section.

6. Specifications

FeatureDescription
Item TypeOval Opening Portlight Window
MaterialStainless steel + Tempered glass + ABS
Window Dimensions (L x W)Approx. 470x210mm / 18.50x8.27in
Installation Cut Out Size (L x W)Approx. 405x150mm / 15.94x5.91in
Suitable Wall Thickness10-40mm / 0.39-1.57in
Opening Angle0-180 degrees adjustable
FeaturesAnti-aging, Impact & Corrosion Resistant, Anti-UV, Waterproof, Insect Screen
ApplicationBoat, Yacht, Ship, RV

7. User Tips

  • Professional Installation Recommended: Due to the precision required for a waterproof and secure fit, especially in marine environments, it is strongly advised to have the window installed by a professional engineer or experienced technician.
  • Integrated Insect Screen: The insect screen is an integral part of the window design and is not designed to be removed or replaced separately.
  • Regular Seal Checks: For optimal performance and to prevent water ingress, make it a habit to regularly inspect the window seals for any signs of wear or damage.

8. Warranty and Support

For warranty information and technical support, please refer to the terms provided by your retailer or contact the seller directly. Keep your proof of purchase for any warranty claims.

© 2024 YOSOO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.