1. Introduction
Thank You!
Thank you very much for choosing our Dual Band Digital DMR and Analog two-way radio. This radio adopts the latest advances in technology, providing reliable communication in today's demanding communication environment. It offers both DMR digital and analog communication, with an innovative DMR digital processing system to achieve SMS, high-audio quality, and digital encryption. The Baofeng DM-32UV features Text Messaging, Record, Digital Encryption, Emergency Alarm, Work Alone, GPS, APRS Location Reporting, Roaming, Analog DTMF, 2TONE, STONE, CTCSS/DCS encode/decode functions.
Notice to Users (FCC)
This device complies with Part 15 of the FCC rules per the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications made to this device, not expressly approved by Baofeng, could void the authority of the user to operate this equipment.
Notice to Users (ISED)
The operation of your Baofeng radio is subject to the Radiocommunications Act and must comply with rules and regulations of the Federal Government's department of Innovation, Science, and Economic Development Canada (ISED). ISED requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.
Notice to Users (RED)
European Users should note that operation of this unit in Transmit mode requires the operator to have a valid Amateur Radio License from their respective Countries Amateur Radio Licensing Authority for the Frequencies and Transmitter Power levels that this Radio transmits on. Failure to comply may be unlawful and liable for prosecution. At this subject, refer to the "EU" specification guide 2014/53/EU.
- When programming the radio, start by reading the factory software data, and then rewrite this data with your frequency etc., to a new saved code plug, otherwise errors may occur.
- You can use the programming cable with a PC to program the frequency, channel type, power etc. your programming must comply with your FCC, CE, UKCA, IC (or other country) license certification.
2. Safety Information
Preface
To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information carefully before using our products.
Intended Use
Our products are designed to provide reliable wireless communication services for users across many industry sectors. In order to use the products safely and to achieve the best performance, they must be used as intended. The operator of the product is responsible for damage to the product or damage caused by the product if the product was used beyond the intended use instructions.
Intended use includes that:
- The product is used by users who have full knowledge of its RF exposure and can exercise control over their RF exposure to meet the occupational limits in FCC/ICNIRP and international standards.
- All the security instructions set forth in this document are always heeded.
- The general, national and in-house safety regulations are heeded.
- The product is exclusively used with the frequencies licensed by the respective authority.
- The product is configured appropriately by the dealer.
Besides, intended use also requires the product operator to be well-trained and to be familiar with the applicable standards, regulations and provisions.
RF Radiation Information
RF Radiation Profile
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted. RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation during use.
RF Radiation Safety
For function-related reasons, increased electromagnetic radiation may occur with specific products. Taking into consideration that unborn life is increasingly worthy of being protected, pregnant women should be protected through appropriate measures. People with personal medical devices such as cardiac pacemakers and hearing aids can also be endangered by electromagnetic radiation. The operator is obliged to assess workplaces with a considerable risk of exposure to radiation and to avert any hazards.
In order to ensure user health, experts from relevant industries including science, engineering, medicine and health work with international organizations to develop standards for safe exposure to RF radiation. Our product is designed and tested to comply with such standards, including:
- United States Federal Communications Commission. Code of Federal Regulations; 47CFR part 2 sub-part J.
- American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992
- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999
- International Commission on Non-Ionizing Radiation Protection (ICNIRP)1998.
FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should meet the requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against exposure to RF energy.
EU Regulatory Conformance
As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. All applicable EU regulations are regarded (2006/66/EC, 2011/65/EU, 2012/19/EU). Please note that the above information is applicable to EU countries only.
Precautions for Portable Terminals
Operating Prohibitions
To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions:
- Do not operate the product in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials. In such location, only an approved Ex-protection model is allowed for use, but any attempt to assemble or disassemble it is strictly prohibited.
- Do not operate the product near or in any blasting area.
- Do not operate the product near any medical or electronic equipment that is vulnerable to RF signals.
- Do not hold the product while driving.
- Do not operate the product in any area where use of wireless communication equipment is completely prohibited.
Important Tips
To help you make better use of the product, be sure to observe the following instructions:
- Do not use any unauthorized or damaged accessory.
- Keep the product at least 2.5 centimeters away from your body during transmission.
- Do not keep the product receiving at high volume for a long time.
- For vehicles with an air bag, do not place the product in the area over the air bag or in the air bag deployment area.
- Keep the product and its accessories out of reach of children and pets.
- Please operate the product within the specified temperature range.
- Continuous transmission for a long time may lead to heat accumulation within the product. In this case, please keep it at a proper location for cooling.
- Handle the product with care.
- Do not disassemble, modify or repair the product and its accessories without authorization.
Precautions for Batteries
Charging Prohibitions
To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions:
- Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres and other flammable or explosive materials.
- Do not charge your battery that is wet. Please dry it with a soft and clean cloth prior to charge.
- Do not charge your battery suffering deformation, leakage and overheat.
- Do not charge your battery with an unauthorized charger.
- Do not charge your battery in a location where strong radiation is present.
- Overcharge shall always be prohibited for it may shorten the life of your battery.
Maintenance Instructions
To help your battery work normally or prolong its life, be sure to observe the following instructions:
- Accumulated dust on charging connector may affect normal charging. Please use a clean and dry cloth to wipe it on a regular basis.
- It is recommended to charge the battery under 5°C~40°C. Violation of the said limit may cause battery life reduction or even battery leakage.
- To charge a battery attached to the product, turn it off to ensure a full charge.
- Do not remove the battery or unplug the power cord during charging to ensure a smooth charging process.
- Do not dispose of the battery in fire.
- Do not expose the battery to direct sunlight for a long time nor place it close to other heating sources.
- Do not squeeze and penetrate the battery, nor remove its housing.
Transportation Instructions
- Damaged batteries must not be transported.
- To avoid short circuit, separate the battery from metal parts or from each other if two or more batteries are transported in one packaging.
- The radio must be switched off and secured against switch-on, if the battery is attached.
The content of the shipment must be declared in the shipping documents and by a Battery Shipping Label on the packaging. Contact your hauler for the local regulations and further information.
Precautions for Disposal
Once the service life of our products (including but not limited to radios and batteries) has ended, they shall not be disposed as household garbage. Their recycling and disposal shall satisfy your local regulations.
Disposal of your Electronic and Electric Equipment
Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Electronic and Electric Equipment should be recycled at a facility capable of handling these items and their waste by products. In EU countries, please contact your local equipment supplier representative or service center for information about the waste collection system in your country.
Attention in case of use
This transceiver works on frequencies which are not generally permitted. As for the actual usage, the user has to possess an amateur radio license. Usage is allowed only in the frequency bands which are allocated for amateur radios.
3. Package Contents
Unpack the radio carefully. We recommend that you identify the items listed in the following table before discarding the packing materials. If any items are missing or have been damaged during shipment, please contact the carrier or the dealer.
| Item | Quantity (PCS) | Item | Quantity (PCS) |
|---|---|---|---|
| Radio | 1 | Antenna | 1 |
| Battery | 1 | Radio Case | 1 |
| Charger | 1 | Instruction Manual | 1 |
| Power Adapter | 1 |
Check whether the frequency band on the antenna label matches that on the radio label. If not, please contact your dealer.
4. Product Overview
This section will familiarize you with the external structure and programmable key functions of the unit.
4.1 Product Illustration
The radio features a 2.0" LCD screen, full keyboard design, and a robust build. It supports U/V dual frequency, AM aviation band reception, and FM radio function.
4.2 Keys and Controls
The following table describes the functions of the radio's keys:
| Option | Functionality |
|---|---|
| [PTT] Transmit Key | Transmit and receive switch key; press this key and speak into the microphone when transmitting; release when receiving. |
| SK1-Customized SideKey | Default short press is the radio function. Default long press for emergency alarm switch. |
| SK2-Customized SideKey | Default short press is the monitor function. Default long press is the power switch key. |
| P1-Customized function key | Default short press is [V/M] key to switch frequency/channel mode. Default long press to toggle display mode: either display frequency, or display channel name, or display channel number. |
| P2-Customized function key | Default short press is [A/B screen (main/sub-frequency) key to toggle up/down screen. Default long press for dual-frequency guard mode switching to toggle dual-guard dual standby, dual-segment single-guard, single-segment same-screen display. |
| 0-9 Numeric key | Default: 0 to 9. Under DTMF function, it indicates [0 to 9] code characters. Under Pinyin Input Method, it indicates to select punctuation or letters. If set numeric shortcut function, long press this key to jump to the corresponding contact. |
| Menu/Confirm key | Short press is used to activate the menu mode, after entering the menu, use this key to select each item in the menu. Long press this key and numeric key to enable one-touch function (valid after CPS setting). |
| Back/Delete key | In menu mode, return to the previous menu or exit the menu. Long press this key to switch channel mode (MR) or frequency mode (VFO). Name or SMS editing input status, clear the inputted information. |
| [▲] Up key | MR mode, change the channel upwards. SMS editing, move the cursor to the left. |
| [▼] Down key | MR mode, change the channel downward. In SMS editing, move the cursor to the right. |
| [✱] key | Press and hold this key, the keypad locks the on/off function. Under DTMF function, indicates code word. Under the input method interface, switch the input method mode. |
| [#] key | In digital mode, short press to enter manual dialing, press # key to switch individual/group call. Analog mode to enter DTMF dialing. |
4.3 Status Indication (LCD Icons and LED)
The LCD screen displays various icons to indicate the radio's status. The top LED also provides status indications.
| Icon | Description | Icon | Description |
|---|---|---|---|
| Digital Encryption On | Main band. | ||
| Battery level indicator | There is/are unread short message(s). | ||
| Positioned successfully | The InBox is full. | ||
| O | Position turn on, but the position has not been successful. | V | VOX enabled |
| The radio transmits and receives through a repeater | Double Slot turn on | ||
| + | Frequency shift direction if enabled in MR | H/M/L | TX power: -High Power/Low Power/Middle Power |
| Frequency shift direction if enabled in MR | DW | Dual Watch Activation | |
| Monitor is turned on | DCS | DCS enabled | |
| Record function is turn on | CT | CTCSS enabled | |
| e | The radio is scanning | Scan stays on non-priority channels | |
| VFO | Works in frequency mode | 1--64 | Memory channel |
| CHA | Under the call interface, TX or RX in A band | CH B | Under the call interface, TX or RX in B band |
| The radio stays on priority channel 1. | The radio stays on priority channel 2. | ||
| Digital mode, incoming call indication | N | Digital mode, call origination instructing | |
| Radio Silent turn on | Narrowband enabled (Analog mode) | ||
| DIG | Provides digital communication services | ANA | Provides analog communication services |
| D+A | Mixed digital, allows reception of both analog and digital signals, TX is digital | A+D | Mixed analog, allows reception of both analog and digital signals, TX is analog |
When the battery level indicator reads the battery is depleted, the radio will start beeping periodically as well as flash the backlight of the display and when voice prompts are enabled, a "Low Voltage" announcement will be heard, indicating that you need to change your battery or put your radio in the charger. Press the preprogrammed [Battery Indicator] Key to check the current battery voltage.
LED Indications
The top LED will help you to identify the current radio status.
| LED Indicator | Radio Status |
|---|---|
| Glows red | Transmitting |
| Glows green | Receiving. |
| Flashes orange slowly | Scanning |
5. Setup and Installation
5.1 Component Installation
5.1.1 Installing/Removing the Antenna
a. Installing the Antenna: Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure.
b. Removing the Antenna: Turn the antenna counter-clockwise to remove it.
5.1.2 Battery Installation and Removal
Installation: Make sure the battery is aligned parallel to the radio body and the lower edge of the battery is about 1-2cm below the edge of the radio. After aligning with the rails, slide the battery upward and lock the fastening screws.
Disassembly: To remove the battery, loosen the captive screws until the screws are free from the radio, and slide the battery downward until the battery is free from the body of the radio. Before installing or removing the battery, make sure the radio is completely turned off by turning the power/volume knob counterclockwise.
5.1.3 Installing the Additional Speaker/Microphone (Optional)
Pry open the rubber MIC-Headset jack cover and then insert the Speaker/Microphone plug into the double jack.
5.2 Charging and Battery Maintenance
5.2.1 Charging the Battery Pack
The Li-ion battery pack is not charged at the factory; please charge it before use. Charging the battery pack for the first time after purchase or extended storage (more than 2 months) may not bring the battery pack to its normal maximum operating capacity. Best operation will require fully charging/discharging the battery two or three times before the operating capacity will reach its best performance. The battery pack life may be depleted when its operating time decreases even though it has been fully and correctly charged. If this is the case, replace the battery pack.
5.2.2 Charger Supplied
Please use the specified charger provided by Baofeng. Other models may cause explosion and personal injury. After installing the battery pack, and if the radio displays low battery with a red flashing lamp or voice prompt, please charge the battery.
5.2.3 Use Caution with the Li-ion Battery
- Do not short the battery terminals or throw the battery into a fire. Never attempt to remove the casing from the battery pack, as Baofeng cannot be held responsible for any accident caused by modifying the battery.
- The ambient temperature should be between 5°C-40°C while charging the battery. Charging outside this range may not fully charge the battery.
- Please turn off the radio before inserting it into the charger. It may otherwise interfere with correct charging.
- To avoid interfering with the charging cycle, please do not cut off the power or remove the battery during charging until the green light is on.
- Do not recharge the battery pack if it is fully charged. This may shorten the life of the battery pack or damage the battery pack.
- Do not charge the battery or the radio if it is damp. Dry it before charging to avoid damage.
WARNING:
When keys, ornamental chain or other electric metals contact the battery terminal, the battery may become damaged or injure a human. If the battery terminals are short circuited it will generate a lot of heat. Take care when carrying and using the battery. Remember to put the battery or radio into an insulated container. Do not put it into a metal container.
5.2.4 How to Charge
- Plug the AC Adaptor into the AC outlet, and then plug the cable of the AC Adaptor into the DC jack located on the back of the charger. The indicator light blinks orange and is then ready to charge a battery.
- Plug the battery or the radio into the charger. Make sure the battery terminals are good in contact with charging terminals. The indicator light turns to red--- charging begins.
- It takes approximately 2-5 hours to fully charge the battery. When the lamp lights green, the charging is completed. Remove the battery or the radio unit with its battery from socket.
Note: When charging a radio (with battery) the indicating lamp will not turn into green to show the fully charged status if the radio is powered on. Only when the radio is switched off will the lamp indicate normal operation. The radio consumes energy when it is power-on, and the charger cannot detect the correct battery voltage when the battery has been fully charged. So the charger will charge the battery in constant voltage mode and fail to indicate correctly when the battery has been fully charged.
5.2.5 LED Indicator during Charging
| STATUS | LED |
|---|---|
| No Battery | Green and red alternately flashing |
| Charge Normally | Red |
| Fully Charged | Green |
| Trouble | Red blinks fast for a long time |
NOTE: Trouble means battery too warm, battery short-circuited or charger short-circuited.
5.2.6 Using the Type-C Charger
The Type-C charger is a handy port that allows you to conveniently charge your Li-ion battery pack.
- Make sure your radio is turned OFF.
- Plug the Type-C cable into the Type-C charging port on your battery. Connect the other end of the micro-USB charger to wall power outlet.
- An empty battery will be fully charged in 4 hours.
- The battery meter on LCD will move to indicate the battery is charging.
Note: It is recommended to power OFF your radio while charging. However, if power is turned on while charging, you may not be able to transmit a message if the battery is completely empty. Allow time for the battery to charge to 1 bar before attempting to transmit a message. For optimal battery life, remove the radio from the charger within 6 hours. Do not store the radio while connected to the charger.
6. Basic Operations
6.1 Power On/Off the Radio
Power On: Turn on the radio by turning the [Power/Volume] switch clockwise till a click is heard, and the LCD displays will show a start-up message, and you will hear a beep after three seconds.
Power Off: Turn the [POWER/VOLUME] switch counterclockwise to turn off the radio until you hear a "click" and the LCD screen will display "Powering Down...".
6.2 Adjust Volume
Rotate the [Power/Volume] knob to adjust the volume. Turn clockwise to increase the volume and counterclockwise to decrease the volume. The LCD display will show the volume status during an adjustment.
6.3 Main Band/Sub Band Switch
Press the key to switch the main channel to the other channel if there are 2 channels shown on the display. The band indicated by the icon is the main band.
- ANA: is the analog format.
- DIG: is DMR digital.
- A+D: is mixed analog and DMR digital.
- D+A: is mixed DMR digital and analog.
6.4 VFO/Channel Switch
Press and hold the key to switch between VFO and channel display.
- Frequency mode will display the VFO symbol.
- Channel mode will display CH XX and the channel sequence.
6.5 Set Up VFO Frequency
Turn the radio to VFO mode, then press the key to switch to the main band.
Operation 1: Press the ▲/▼ keys or turn the channel selector to adjust the VFO frequency steps.
Operation 2: Input the VFO frequency directly by the keyboard. For example, to enter a frequency of 432.5625 MHz:
- Press and hold the key to switch to VFO mode.
- Enter [4][3][2][5][6][2][5] on the numeric keypad.
6.6 Select a Zone
Zones make it easy to manage channels. A zone is a group of channels where multiple available channels are combined together.
Method 1: Press the pre-programmed [Zone Up] key or [Zone Down] key to select a zone.
Method 2 (Menu Operation):
- Press the key to enter Main Menu -> Zone.
- Press the key to enter, then press the ▲/▼ key to select a zone.
- Press the key to enter and then press ▲/▼ to select "Apply".
6.7 Select a Channel
Press and hold the key to switch the radio between VFO and Channel mode, select Channel mode.
Operation 1: Turn the channel switch to select a channel.
Operation 2: Input the channel numbers by the keyboard. For example, if you want to switch to channel 64, input 0+6+4 (a total of 3 digits), and it will switch to channel CH64. A channel can either be Analog or Digital.
6.8 New Channel (Manually Programmed Channels)
Allows the creation of new channels. To create a new channel, proceed as follows:
- Press and hold the key to switch to channel mode.
- Press the key to enter Main Menu -> Setting -> Channel Set -> New Channel.
- Select Analog, Digital, A+D, D+A Channel Type.
- Enter the channel alias and confirm.
- Enter the Rx frequency and confirm.
- Enter the Tx frequency and confirm.
- Prompts "Add success" and returns to the previous menu.
Steps to add a new channel to a zone:
- Press and hold the key to switch to channel mode.
- Press the key to enter Main Menu -> Zone -> Select a zone and confirm.
- Press ▲/▼ key to select "Add Channel".
- Press ▲/▼ key to select the channel you just added in the channel list and confirm.
- Prompt "Add Success" and return to the previous menu.
To configure parameters for a newly created channel:
- Long press the key to switch to channel mode.
- Press the key to enter Main Menu -> Settings -> Channel Set.
- Analog channel can configure parameters such as CTCSS/DCS, alias, channel bandwidth and so on.
- Digital channel can be configured with parameters such as TX Contact, RX Group List, Color Code, Time Slot, Radio ID, Alias and so on.
7. Advanced Features
7.1 Calling Services
7.1.1 Digital Calls
You can originate or receive the following types of calls on a digital channel:
- Private Call: a call from a single user to another single user.
- Group call: a call from a single user in a group to all other members of the group.
- All Call: a call from a single user to all other users on the current channel. You can ask your dealer to enable the All Call feature.
7.1.2 Making a Call
You can make a call by the following operation methods:
- Turn the channel switch to choose a programmed channel. Press and hold the [PTT] key to make a call directly to a pre-programmed contact on the current digital channel.
- Select "Contacts List" in the "Talk Group" menu, select one of the contacts, and then press and hold the [PTT] key to make the call.
- Select "Call Log" in the main menu, enter the Missed / Answered / Sent call list, select a call log, and then press and hold the [PTT] key to make the call.
- Select "Talk Group > Manual Dial" in the main menu, press [#] key to switch between private call number or group call number, enter the number and press and hold the [PTT] key to make the private call or group call.
- When the dealer configures the call object of [Call] as a personal call contact or group call contact, press the pre-programmed [Call] key and then press and hold down the [PTT] key to make a personal call or group call.
Hold the radio vertical 2.5-5cm from your mouth, press the [PTT] key to start the call, the red LED lights up, the receiver ID/name/city/state/country/call type and call out icon will be displayed on the LCD. Release [PTT] key to receive the reply. If you set the channel transmit power to "Low" and cannot make a successful call, you can use the pre-programmed [TX Power] key to temporarily switch to high power transmission.
7.1.3 Receiving and Replying to Calls
When the radio is in digital mode, it can receive and respond to calls with the same frequency/color code/time slot. When receiving a call:
- If the caller DMR ID number is a programmed ID number in the receiver's digital contact list, the radio will ring briefly when answering a call.
- The LCD screen will display the corresponding DMR ID/alias/city/state/country/call type and inbound icon based on the contents of the contact list.
- The green LED lights up.
- You can reply by press and hold the [PTT] key after the other party has finished the call.
7.1.4 Ending a Call
- Private Call/group call: When no one on both sides presses the [PTT] key to speak and exceeds the call hold time, the terminal will end the call.
- All Call: The terminal will end the all call when the caller releases the [PTT] key.
7.2 Monitor
In standby, press the pre-programmed [Monitor] key to enter Monitor. When receiving matched carrier but the signaling / ID is unmatched or the signal is too weak, this function allows monitor the weak signal and signal with unmatched ID. Press the pre-programmed [Monitor] key again to shut off speaker and return to standby. When in analog mode, if no signal, it will emit noise when press the [Monitor] Key. The icon is seen when monitor is activated.
7.3 Emergency Alarm
The emergency alarm function can only be triggered by press the [Alarm] key when the channel is configured with an alarm system. The following alarm types can be programmed by the CPS:
- None: the alarm function cannot be used.
- Siren only: Alarm tone is given locally and the control center will not receive the alarm signal.
- Normal: in alarm state, with sound and visual indication.
- Secret: in alarm state, without any sound and visual indication.
- Secret with voice: in the alarm state, without any sound and visualization indication, except for the sound that will be released if a call is received.
- Alarm siren: a local alarm tone is emitted after sending an emergency alarm signal to the control center. In the alarm state, there are audible and visual indications.
Press pre-programmed [Alarm] key to turn on emergency alarm function, then press this key again to return.
7.4 Work Alone
If an unforeseen situation is encountered during a solo job and the radio cannot be operated within the pre-programmed time, the radio will automatically alert and inform a companion or the control center for assistance. Press the pre-programmed [Work Alone] key to turn on work alone. Response time (1-256 minutes), reminder time (1-256 seconds), operating mode, and tone selection for work alone can be set through the CPS programming software. CPS Setting Path: Public-Optional Functions- work alone.
7.5 Man Down Alarm
The radio is equipped with Man Down function. After this function is activated, if the radio is not corrected within the "Man Down Delay Time" time after it is tilted to a certain angle, or if it continues to be in a stationary state during the "Man Down Delay Time" time, the radio will send an alarm status message to the alarm number. The radio will send the alarm status message to the alarm number. Moving or righting the terminal exits the emergency alarm. Press the pre-programmed [Man Down] key to turn on the Man Down function. The Man Down delay time can be set through the CPS programming software.
7.6 FM Radio Functions
Turn on or off the radio as follows: Press the key to enter the main menu -> Settings -> Radio Settings -> Key Function -> Customize any one of the "SK1/SK2/P1/P2" keys as [FM Radio]. Turn the radio on or off by press the pre-programmed [FM Radio] key. After turning on the radio function, the radio station search method is as follows:
- Press the key to switch the radio band between 65-76M or 76-108M respectively.
- Press the [#] key to enter the radio station search mode, the screen displays 'Seek...'.
- Press ▲/▼ key to select the radio channel according to the preset step frequency.
- Directly input the familiar radio station frequency through the numeric keys (frequency mode, e.g. 96.9MHz, input 0969)
- Short press the preset [FM Radio] function key or key to exit the radio mode.
7.7 Battery Voltage Test
Press the programmed [Batt Indicator] key to check the current battery level, which will be accompanied by a voice prompt "Battery High / Battery Medium / Battery Low".
7.8 One Key Sweep
In analog mode, press the key to enter Main Menu -> Settings -> Radio Settings > Key Function -> Customize any one of the "SK1/SK2/P1/P2" keys to [Freq Search]. When using the Freq Search function, the radio will act as a scanning receiver. Turn on the radio, press the pre-programmed [Freq Search] key to enter the frequency sweep mode, and the screen will display "Seek...". Successful sweeping will display the resolved frequency and CTCSS/DCS, and turn on the speaker. You can press the key to save the swept frequency and CTCSS/DCS to the channel. Press and hold the [PTT] key to making a callback.
7.9 Keypad Locking and Unlocking
The radio has the ability to lock the keypad, there are two locking modes: manual mode and automatic mode.
- Manual: Press the pre-programmed [Keypad Lock] key to lock the keypad.
- Auto: To allow the keypad to lock automatically, follow the procedure below to enable the "Keypad Lock" feature:
- Press the key to enter the Main Menu -> Settings -> Radio Settings -> Key Functions -> Key Lock -> Switch.
- Select "Delay Time", then press ▲/▼ key to set the delay time.
- Keypad Unlock: Press the key, then press to unlock the keypad.
7.10 Keyboard Input
You can input user alias, number, SMS, etc. through the keypad of this unit. This unit supports English input method, Pinyin input method, and numeric input method.
- To switch the input method between alphabet mode and numeric mode, press [#].
- To enter special characters, press [✱] in alphabet mode or numeric mode.
- To enter a space, press [0] in letter mode.
Note: During input, if there is no content in the editing area, press the key to return to the previous menu; if there is content in the editing area, press the key to delete a character before the cursor until there is no content in the editing area, then press the key to return to the previous menu. In the input text display area, press ▲/▼ to move the cursor left/right.
7.11 Dual Watch
- Single Mode: Single band mode, only the channel name, frequency, channel number, and area where the working band is located are displayed.
- Double Wait: The screen displays the DW icon. The same screen displays the main frequency and sub-frequency, and guards calls from the main frequency or sub-frequency. The factory default is Dual Band Dual Watch mode.
- Single Wait: No DW icon is displayed on the screen. The screen displays the primary and secondary frequencies on the same screen, but only receives calls from the primary band, then the secondary band will be prohibited from receive calls.
7.12 Access Advanced Features for Private Call
Method 1: Access Private Call from Contacts List
- Press key to enter Talk Group/Contacts list, press ▲/▼ key to select a Private Call contact.
- Press key to confirm to enter View Contacts, press to confirm to view contact information.
- Press ▲/▼ key to select application function.
- Press to confirm to enter the application function.
Method 2: Access by manual dial
- Press key to enter Talk Group, press ▲/▼ key to enter Manual Dial.
- Confirm to enter Manual Dial and enter the caller ID.
- Press Option to enter the application function.
Method 3: Press # key CSV Contacts access
- Press # key to enter CSV contacts.
- Enter the Private Call ID and press Option to enter the application function.
7.13 Set Up Application Features for Private Call
7.13.1 Radio Check
Select Radio Check, and it will send out a radio check to the target radio which will send back a message if it is available or not available to the transmit radio. With this feature, you can determine if another radio is active and powered on in the system.
7.13.2 Call Alert
Select Call Alert, it will send out a call alert, the target radio will sound a beep or vibrate when receiving the call alert, and it will return a success call or failed call message to the transmit radio.
7.13.3 Remote Monitor
Select Remote mon. and it will send out a signal for the target radio will turn on its microphone and transmit when receiving the signaling, it will send back the voice to the transmit radio. With this feature you can monitor the sound activity near the target radio remotely.
7.13.4 Radio Disable
Select Radio Disable, and it will send out a disable signaling to the target radio which will be disabled (No display, no operation) when receiving the signaling and it will send back a disable successful message to the transmit radio.
7.13.5 Radio Enable
Select Radio Enable, and it will send out a enable signaling to the disabled radio and the target radio will return to standby when it receives this signaling and send back a enable successful message to the transmit radio.
7.13.6 Measure Period
When caller and receiver both GPS positioned, if the caller turn on measure period function and the receiver is within communication range, Tx radio will detect the distance and direction between two radios at fixed interval, and then show the information on the display of Tx radio.
8. Programming Guide
Baofeng DM-32UV radios ship from the manufacturer "Keypad" locked per FCC rules. You can press the (Menu) key and the (star) key to unlock the keypad for the first time of use. You will need the programming cable to connect your radio to your computer for programming. The programming software and codeplug programming guide are available for download from Baofeng website: http://www.baofengradio.com
When programming this radio for the first time, it is recommended you first READ the radio with the software and then save this file for future reference as it contains the default programming and settings. In addition, after you READ this radio with software, first make your programming and frequency changes, then send this edited file back to your radio. When using a profile in your hard disk, use the CPS to import and edit it. Then write all data to the radio. During reading data from the radio (frequency reading), the PC program is displayed and the red indicator light flashes. During the process of writing data to the radio (frequency writing), the PC program is displayed and the green indicator light flashes.
8.1 Record Management
Enter the record management software through CPS software -> Tools -> Record. You can connect the radio, read out the record records, view the detailed records of each record (Record ID, TX/RX, Call ID, Call Type, Record time, Record duration, etc.) and play or save as WAV file to save the records.
8.2 Firmware Upgrade
You can download program software, firmware (codeplug), program guide from baofeng website: http://www.baofengradio.com. Through CPS software -> Tools -> Firmware Upgrade -> open the file (load bin file), click upgrade, a dialog box prompts "Please hold down the [PTT+SK1] key to open the radio", according to the dialog box prompts and hold down the [PTT] and [SK1] keys to open the radio (the indicator light is on green), click "Upgrade", click "Upgrade", then press [PTT] and [SK1] keys to open the radio (the indicator is on green). "Upgrade", the red light flashes until the upgrade is completed.
8.3 Internal Parameters
Edit model information, band information, function options (value-added function open).
8.4 Tuning and Testing Items
The radio enters the test mode and the debugging of technical indexes (read first, then modify, then write).
8.5 Download Language and Character Libraries
Download voice files, Chinese character libraries, English character libraries and other arbitrary files.
8.6 Power-on Picture
Update the power-on picture, the format of the power-on picture is .bmp. The size and resolution of the picture is 160x128 (1.77 inch), 240x320 (2.00 inch).
8.7 Amateur DMR-MARC
For the best Amateur DMR experience obtain a subscriber ID from one of many available Amateur Radio sources. A U.S. Amateur can obtain a DMR ID From: https://www.radioid.net/cgi-bin/trbo-database/register.cgi For DMR repeaters in your area please see: www.repeaterbook.com World DMR repeater network map: https://www.repeaterbook.com/index.php/repeater-database World DMR repeater network with verified Talkgroups by activity: https://brandmeister.network/?page=lh
8.8 Global Amateur Contact Database (.csv)
The DM-32UV DMR radios contain a separate database memory for importing and displaying Amateur DMR individual IDs, call sign and user name in comma-delimited format (.csv). Please reference in the programming guide for import and export database operations detailed. User List Contact Database: https://ham-digital.org/status/
9. Troubleshooting
Due to its sturdy design, your radio requires almost no maintenance. However, it is a sophisticated electronic instrument, so the following precautions should be followed: If the antenna is damaged, do not transmit except in emergency situations. Antenna failure to transmit may cause further radio damage. You are responsible for continuing to perform FCC technical compliance checks on the radio. You should arrange regular performance checks with your dealer.
| Phenomena | Solution |
|---|---|
| The radio cannot be switched on or no display after being switched on... | Battery pack may not be installed properly. Remove the battery pack and install it again. Battery power may be insufficient. Recharge or replace the battery pack. |
| The battery doesn't last very long after charging. | The battery is defective, please replace it with a new battery pack. |
| Cannot talk to or hear other members in your group. |
|
| Other voices from Non group members are heard on the channel. | Analog. Change the CTCSS/DCS Tone and make sure to change the tone on all radios in your group. |
| Digital channel can not Private call, Group call. | Check the Color Code, Time Slot, Tx Contacts, arranged to Rx Group List is correct. |
*If the above solutions cannot fix your problems, or you may have some other queries, please contact your dealer for more technical support.
10. Technical Specifications
General Specifications
| Parameter | Value |
|---|---|
| Frequency Range (Scanning Receiver) | VHF136.0-174.0MHz/UHF400.0-480.0MHz/AM108-136MHz/FM65-108 |
| Frequency Range (Transmit) | 144-148MHz/420-450MHz(V04), 144-146MHz/400-429.995MHz/450-69.990MHz(V05), 144-146MHz/430-440MHz/(V06), 136-174MHz/400-438MHz(V07), 136-174MHz/400-480MHz(V00) |
| Memory Channel | 4000 channels |
| Digital Contacts | 800+200000(.csv) |
| Channel Spacing | 25KHz (Wide Band), 12.5KHz (Narrow Band) |
| Frequency Stability | ±2.5ppm |
| Operating Temperature | -10°C~+55°C |
| Operating Voltage | 7.4V DC±20%/(2100mAh) |
| Size | 129x61x39mm (with battery pack) |
| Weight | 282g (with battery pack, antenna) |
Transmitting Part
| Parameter | Value |
|---|---|
| Output power | High:8W, Middle:4W, Low:1W |
| Output Consumption | Analog≤2.6A, Digital≤1.5A |
| Consumption | ≤0.18A |
| FM modulation | 16KCF3E@25KHz, 141KCF3E@20KHz, 11KCF3E@12.5KHz |
| 4FSK digital modulation | 12.5KHz for data:7K60FXD, 12.5KHz for data and voice: 7K60FXE |
| Modulation Distortion | ≤5% |
| Signal-to-noise(wide/narrow) | ≥45dB@25KHz, ≥40dB@12.5KHz |
| Adjacent Channel power | ≥-65dB, ≤-60dB |
| Audio Response | +1~-3dB |
| Antenna Port Spurious | 9KHz-1GHz: ≤-36dBm, 1GHz-12.75GHz: ≤-30dBm |
Receiving Part
| Parameter | Value |
|---|---|
| Digital Protocol | ETSI-T5102 361-1,-2,-3 |
| Vocoder type | AMBE+2™ |
| Analog receive sensitivity | -122dBm (12dB SINAD) |
| Digital receive sensitivity | -120dBm (BER≤5%) |
| Audio power | ≤1W |
| Audio distortion | <10% |
| Audio response | +1~-3dB |
| Signal imitation | ≥70dB |
| Inter-mediation (Wide/narrow) | ≥62dB/≥58dB |
| Adjacent channel selectivity | ≥65dB/≥60dB |
| Receive Current | ≤380mA |
| PM noise | ≥45dB@25KHz/≥40dB @12.5KHz |
*All specifications may be modified without prior notice or liability.
CTCSS Frequencies
| Number | Frequency | Number | Frequency | Number | Frequency | Number | Frequency | Number | Frequency |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 67.0 | 2 | 69.3 | 3 | 71.9 | 4 | 74.4 | 5 | 77.0 |
| 6 | 79.7 | 7 | 82.5 | 8 | 85.4 | 9 | 88.5 | 10 | 91.5 |
| 11 | 94.8 | 12 | 97.4 | 13 | 100 | 14 | 103.5 | 15 | 107.2 |
| 16 | 110.9 | 17 | 114.8 | 18 | 118.8 | 19 | 123.0 | 20 | 127.3 |
| 21 | 131.8 | 22 | 136.5 | 23 | 141.3 | 24 | 146.2 | 25 | 151.4 |
| 26 | 156.7 | 27 | 159.8 | 28 | 162.2 | 29 | 165.5 | 30 | 167.9 |
| 31 | 171.3 | 32 | 173.8 | 33 | 177.3 | 34 | 179.9 | 35 | 183.5 |
| 36 | 186.2 | 37 | 189.9 | 38 | 192.8 | 39 | 196.6 | 40 | 199.5 |
| 41 | 203.5 | 42 | 206.5 | 43 | 210.7 | 44 | 218.1 | 45 | 225.7 |
| 46 | 229.1 | 47 | 233.6 | 48 | 241.8 | 49 | 250.3 | 50 | 254.1 |
DCS Codes
| Number | Code | Number | Code | Number | Code | Number | Code | Number | Code |
|---|---|---|---|---|---|---|---|---|---|
| 1 | D023N | 2 | D025N | 3 | D026N | 4 | D031N | 5 | D032N |
| 6 | D036N | 7 | D043N | 8 | D047N | 9 | D051N | 10 | D053N |
| 11 | D054N | 12 | D065N | 13 | D071N | 14 | D072N | 15 | D073N |
| 16 | D074N | 17 | D114N | 18 | D115N | 19 | D116N | 20 | D122N |
| 21 | D125N | 22 | D131N | 23 | D132N | 24 | D134N | 25 | D143N |
| 26 | D145N | 27 | D152N | 28 | D155N | 29 | D156N | 30 | D162N |
| 31 | D165N | 32 | D172N | 33 | D174N | 34 | D205N | 35 | D212N |
| 36 | D223N | 37 | D225N | 38 | D226N | 39 | D243N | 40 | D244N |
| 41 | D245N | 42 | D246N | 43 | D251N | 44 | D252N | 45 | D255N |
| 46 | D261N | 47 | D263N | 48 | D265N | 49 | D266N | 50 | D271N |
| 51 | D274N | 52 | D306N | 53 | D311N | 54 | D315N | 55 | D325N |
| 56 | D331N | 57 | D332N | 58 | D343N | 59 | D346N | 60 | D351N |
| 61 | D356N | 62 | D364N | 63 | D365N | 64 | D371N | 65 | D411N |
| 66 | D412N | 67 | D413N | 68 | D423N | 69 | D431N | 70 | D432N |
| 71 | D445N | 72 | D446N | 73 | D452N | 74 | D454N | 75 | D455N |
| 76 | D462N | 77 | D464N | 78 | D465N | 79 | D466N | 80 | D503N |
| 81 | D506N | 82 | D516N | 83 | D523N | 84 | D526N | 85 | D532N |
| 86 | D546N | 87 | D565N | 88 | D606N | 89 | D612N | 90 | D624N |
| 91 | D627N | 92 | D631N | 93 | D632N | 94 | D645N | 95 | D654N |
| 96 | D662N | 97 | D664N | 98 | D703N | 99 | D712N | 100 | D723N |
| 101 | D731N | 102 | D732N | 103 | D734N | 104 | D743N | 105 | D754N |
| 106 | D023I | 107 | D025I | 108 | D026I | 109 | D031I | 110 | D032I |
| 111 | D036I | 112 | D043I | 113 | D047I | 114 | D051I | 115 | D053I |
| 116 | D054I | 117 | D065I | 118 | D071I | 119 | D072I | 120 | D073I |
| 121 | D074I | 122 | D114I | 123 | D115I | 124 | D116I | 125 | D122I |
| 126 | D125I | 127 | D131I | 128 | D132I | 129 | D134I | 130 | D143I |
| 131 | D145I | 132 | D152I | 133 | D155I | 134 | D156I | 135 | D162I |
| 136 | D165I | 137 | D172I | 138 | D174I | 139 | D205I | 140 | D212I |
| 141 | D223I | 142 | D225I | 143 | D226I | 144 | D243I | 145 | D244I |
| 146 | D245I | 147 | D246I | 148 | D251I | 149 | D252I | 150 | D255I |
| 151 | D261I | 152 | D263I | 153 | D265I | 154 | D266I | 155 | D271I |
| 156 | D274I | 157 | D306I | 158 | D311I | 159 | D315I | 160 | D325I |
| 161 | D331I | 162 | D332I | 163 | D343I | 164 | D346I | 165 | D351I |
| 166 | D356I | 167 | D364I | 168 | D365I | 169 | D371I | 170 | D411I |
| 171 | D412I | 172 | D413I | 173 | D423I | 174 | D431I | 175 | D432I |
| 176 | D445I | 177 | D446I | 178 | D452I | 179 | D454I | 180 | D455I |
| 181 | D462I | 182 | D464I | 183 | D465I | 184 | D466I | 185 | D503I |
| 186 | D506I | 187 | D516I | 188 | D523I | 189 | D526I | 190 | D532I |
| 191 | D546I | 192 | D565I | 193 | D606I | 194 | D612I | 195 | D624I |
| 196 | D627I | 197 | D631I | 198 | D632I | 199 | D645I | 200 | D654I |
| 201 | D662I | 202 | D664I | 203 | D703I | 204 | D712I | 205 | D723I |
| 206 | D731I | 207 | D732I | 208 | D734I | 209 | D743I | 210 | D754I |
11. User Tips
Based on the provided user reviews and Q&A, no specific user tips regarding product usage are available at this time.
12. Warranty and Support
12.1 On-Line Service and Support
The Baofeng website provides additional information about obtaining service or support for the Baofeng line of two-way radios and accessories. Visit: www.baofengradio.com
12.2 Warning Notes
Every effort has been made to ensure that the information in this document is complete, accurate, and up to-date. Baofeng Radio assumes no responsibility for the results of errors beyond its control. The manufacturer of this equipment also cannot guarantee that changes in the equipment made by non-authorized users will not affect the information in it.
12.3 FCC Licensing Information
The Baofeng radio operates on Commercial / Land Mobile frequencies which require a license from your local radio authority or the Federal Communications Commission (FCC) for business, personal, education and recreational use. To obtain forms, call the FCC forms hotline at: 1-800-418-3676 or go to http://www.fcc.gov. For questions concerning commercial licensing, contact the FCC at 1-888-CALL-FCC (1-888-225-5322).
12.4 User Manual PDF
A detailed user manual in PDF format is available for download: BAOFENG DM-32UV User Manual (PDF).
12.5 Disclaimer
The accuracy and completeness of the contents are sought in the process of compilation, but we do not bear any responsibility for the possible errors or omissions. With the continuous development of technology, we reserve the right to change the design and specification of the product without notice. No copy, modification, translation and dissemination of this handbook may be made in any form without the prior written authorization of our department. Changes or modifications made to this device, not expressly approved by Baofeng, could void the authority of the user to operate this equipment. All operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.
PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED
Address: Room 1508, 15/F, Office Tower II, Grand Plaza, 625 Nathan Road, Kowloon, Hong Kong
E-mail: wangjianhui@baofengradio.com
Website: http://www.baofengradio.com
Made in China | Print version: DM32UV_EN_V1.0