Important Safety Instructions
Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Avoid dropping.
- Do not disassemble.
- Do not submerge in water.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not place dangerous items on top of this device (e.g., liquid-filled objects, lit candles).
- Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
- The adapter should be installed near the device and should be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
- Do not place combustible materials on the product.
- Keep the product out of direct sunlight and open flames, hot appliances, or any other heat sources.
Proper Disposal Instructions
This mark shown on the product or its packaging, indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Waste Electrical & Electronic Equipment
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
FCC Regulatory Compliance
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Warnings
- Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- WARNING: The adapter plug is used as disconnect device, the disconnect device shall remain readily operable.
- Frequency: 2.402GHz-2.48GHz
- The Max. transmit power: 10 dBm
ISED Warnings
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Accessories List
The ULTIMEA Aura A60 package includes the following components:
- Subwoofer (x1)
- Soundbar (x1)
- Surround Speakers (x4)
- Soundbar Power Adapter (x1)
- Surround Speaker Power Adapter (x1)
- Rear Surround Cable (6m) (x1)
- Digital Optical Cable (x1)
- Front Left Surround Cable (2m) (x1)
- Front Right Surround Cable (2m) (x1)
- Remote Control (x1)
- Wall Mount Kit (x1)
- Wall Bracket (x1)
- Mounting Screw on Speakers (x6)
- HDMI Cable (x1)
- User Manual (x1)

Figure: ULTIMEA Aura A60 7.1 Channel Dolby Atmos Soundbar system overview with app interface.
Setup and Installation
Soundbar Controls
The soundbar features a control panel with the following buttons:
- Power Button (ɄɄ): Press to power on or put the device in standby.
- Source Button (ɄɄ): Press to switch between input sources: eARC, OPTICAL, BT (Bluetooth), AUX, USB.
- Bluetooth Button (ɄɄ): Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and manually connect to a new device (BT ID: Aura A60).
- Volume Down Button (-): Decreases the volume.
- Volume Up Button (+): Increases the volume.
Remote Control Functions
The remote control provides comprehensive control over the soundbar's functions:
- Power Button (ɄɄ): Power on/standby.
- LED Dimmer (ɄɄ): Adjust display brightness (5 levels), hold for 3s to turn off.
- eARC Button (ɄɄ): Select HDMI eARC source.
- OPT Button (ɄɄ): Select OPTICAL source.
- AUX Button (ɄɄ): Select AUX source.
- BT Button (ɄɄ): Select BLUETOOTH source.
- USB Button (ɄɄ): Select USB source.
- EQ Reset (ɄɄ): Restore EQ to default settings.
- Xupmix (ɄɄ): Toggle Ultimea Xupmix sound on/off.
- Volume Up (+) / Volume Down (-): Adjust volume.
- Previous (ɄɄ) / Next (ɄɄ): Skip tracks in BT and USB modes.
- Play/Pause (ɄɄ): Play/pause in BT and USB modes.
- Mute (ɄɄ): Mute/unmute sound.
- Device Reset (ɄɄ): Hold for 5 seconds to initialize the device.
- BASS MX (ɄɄ): Adjust bass level (-6 to +6).
- MIDRANGE (ɄɄ): Adjust midrange level (-6 to +6).
- TREBLE (ɄɄ): Adjust treble level (-6 to +6).
- Sound Modes (MOVIE, MUSIC, VOICE, SPORT, GAME, NIGHT): Select preset EQ modes.
- SURROUND (ɄɄ): Adjust surround sound level (-6 to +6).
- PROMPT TONE (ɄɄ): Adjust prompt tone level (0 to 3).
Connecting to TV via HDMI eARC/ARC
For optimal audio quality, especially with Dolby Atmos, use the HDMI eARC/ARC connection.
- Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
- Connect the other end of the HDMI cable into the eARC port of the soundbar.
- Press the "eARC" button on the remote control to select "eARC" input.
Note: Your TV's HDMI port needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar. If you are watching a movie in Dolby Atmos format, set your TV's audio output to Pass Through (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through). For DTS format, set your TV's audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM). Ensure your TV's "CEC" function is enabled for simultaneous control.

Figure: Aura A60 7.1 Channel Dolby Atmos Surround Soundbar in a living room setup.
Connecting to TV via Optical/AUX
If HDMI eARC/ARC is not available, you can use Optical or AUX connections.
- Optical Connection: Connect both sides of the optical cable to the OPTICAL OUT port on your TV and the OPTICAL port on the soundbar. Ensure the optical plug is inserted correctly to avoid damage. If there is no sound, try setting the TV audio output to PCM.
- AUX Connection: Connect a 3.5mm to RCA audio cable (not included) to your TV's RCA AUDIO OUT port and the AUX port on the soundbar. Ensure cable ends match port colors. Remember to unplug the AUX cable when switching modes.
Connecting to Bluetooth
To connect your mobile phone, PC, or TV via Bluetooth:
- Press the Bluetooth button (ɄɄ) on the soundbar or remote control to enter Bluetooth pairing mode.
- Open your device's Bluetooth settings, find and select "Ultimea Aura A60" to connect.
- If already connected and you wish to pair a new device, press and hold the Bluetooth button (ɄɄ) for 3 seconds to disconnect the current device and then pair manually.
Connecting the Subwoofer to the Soundbar
The subwoofer connects to the soundbar via a wired connection. Simply connect the wire from the back of the subwoofer to the SUB OUT port on the soundbar.

Figure: BASS MX with 4-inch wired subwoofer.
Connecting the Surround Speakers to the Soundbar
All surround speakers are connected to the soundbar via wired connections.
- Front Surround Speakers: Use the front surround cables (FR & FL) to connect the front surround speakers to the soundbar.
- Rear Surround Speakers: Connect the rear left and rear right surround speakers using the rear surround cable. Connect the rear right surround speaker to the power supply. The speakers will automatically pair with the soundbar when powered on. A steady indicator light on the rear right surround speaker indicates successful pairing.
- Manual Pairing: Hold the Surround button on the remote for 5 seconds (display shows "SUR" and flashes). Then, hold the Pair button on the right surround speaker for 5 seconds. The indicator light will flash quickly. After successful pairing, the indicator light will remain steady.

Figure: Two front surround speakers setup.
Placement Recommendation
For the best listening experience, place the entire system as shown in the diagram below, ensuring the soundbar is centered in front of your TV, the subwoofer is positioned for optimal bass, and the surround speakers are placed to create an immersive sound field.

Figure: SurroundX Technology diagram showing immersive audio.
Wall Mount Installation
The soundbar and surround speakers can be wall-mounted. The wall mount bracket for the surround speakers is identical to that of the soundbar, ensuring consistent vertical hole spacing and installation method.
Operating Instructions
The ULTIMEA Aura A60 offers various ways to control your audio experience.
Power and Source Selection
Use the power button on the soundbar or remote to turn the system on/off. Select your desired audio source (eARC, Optical, Bluetooth, AUX, USB) using the source button on the soundbar or the dedicated buttons on the remote control.
Volume and Sound Adjustments
Adjust the master volume using the +/- buttons. Fine-tune your audio with dedicated controls for Bass, Midrange, and Treble levels on the remote control. The display will show the current level (e.g., "B5 0" for neutral bass).
Sound Modes
The soundbar features several preset EQ modes for different content types:
- MOVIE: Optimized for cinematic experiences.
- MUSIC: Enhanced for musical playback.
- VOICE: Clears dialogue for TV shows and news.
- SPORT: Tailored for sports broadcasts.
- GAME: Provides immersive audio for gaming.
- NIGHT: Reduces dynamic range for late-night listening.
Additionally, the soundbar supports Hi-Res Sound Mode, 3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Smart Sound Mode, Live Sound Mode, Extra Bass Mode, and Sleeping Mode, accessible via the app or specific remote functions.
Surround Sound and Prompt Tone
Adjust the surround sound level from -6 to +6 to customize your immersive experience. The prompt tone level can also be adjusted from 0 to 3.
App Control
Download the "ULTIMEA" app from Google Play or Apple Store for advanced control. The app allows for 10-band Equalizer Settings and offers 121 preset EQ Matrices, providing extensive customization options for your audio.
Video: Product feature video showcasing Dolby Atmos, SurroundX, EQ settings, and connectivity.
Maintenance
To ensure the longevity and optimal performance of your ULTIMEA Aura A60 soundbar system, follow these maintenance guidelines:
- Cleaning: Use a dry, soft, lint-free cloth to clean the surfaces of the soundbar, subwoofer, and speakers. Do not use any corrosive cleaners, waxes, or oils, as these can damage the finish.
- Ventilation: Ensure that the soundbar and subwoofer have adequate ventilation. Do not block any ventilation openings with items like newspapers, tablecloths, or curtains. Avoid installing the equipment in confined spaces like bookshelves or cabinets without proper airflow.
- Environmental Conditions: Keep the system away from direct sunlight, open flames, and extreme temperatures (both hot and cold). Do not expose the apparatus to rain or moisture, and ensure no objects filled with liquids (like vases) are placed on it.
- Cable Management: Periodically check all wired connections (HDMI, Optical, AUX, speaker cables, power cables) to ensure they are secure and free from damage. Avoid bending or pinching cables excessively.
Troubleshooting
If you encounter issues with your ULTIMEA Aura A60, refer to the following common solutions:
- No Sound in Optical Mode: If you are using the optical connection and hear no sound, try setting your TV's audio output to PCM. This setting is usually found in your TV's audio settings (e.g., TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
- Bluetooth Pairing Issues: If you are having trouble pairing a new Bluetooth device, ensure the soundbar is in pairing mode. If a previous device is still connected, press and hold the Bluetooth button on the soundbar or remote for 3 seconds to disconnect it, then attempt to pair your new device.
- General Device Reset: If the system is unresponsive or behaving unexpectedly, perform a device reset. Press and hold the "Device Reset" button on the remote control for 5 seconds to initialize the device to its factory settings.
- No Power: Check that the power adapters are securely connected to both the soundbar, surround speakers, and the subwoofer, and that they are plugged into a working power outlet.
- Distorted Audio: Check the source audio quality. Try adjusting the Bass, Midrange, and Treble levels. Ensure all cables are properly connected and not damaged.
- Remote Control Not Working: Check the batteries in the remote control. Ensure there are no obstructions between the remote and the soundbar.
Specifications
| Feature | Specification |
|---|---|
| Model Number | U2621 |
| Power Supply | 24V = 3A, 14V = 1A |
| Drivers | 2" x 3 (Soundbar) + 2" x 4 (Surround) + 4" x 1 (Subwoofer) |
| Frequency Response | 65Hz - 18KHz |
| Standby Power | <0.5W |
| Operating Temperature | -10℃ - 45℃ / 14℉ - 113℉ |
| Soundbar Dimensions (W x H x D) | 400 x 65 x 100 mm (15.7" x 2.6" x 3.9") |
| Subwoofer Dimensions (W x H x D) | 140 x 220 x 195 mm (5.5" x 8.7" x 7.7") |
| Surround Speaker Dimensions (W x H x D) | 82 x 88 x 81 mm (3.2" x 3.5" x 3.1") |
| Packaging Dimensions (W x H x D) | 327 x 439 x 177 mm (12.9" x 17.3" x 7") |
| Net Weight | 4.96kg / 10.93lbs |
| Gross Weight | 5.85kg / 12.9lbs |
| Peak Power | 350W |
| Bluetooth Version | 5.3 |
| Channels | 8 (7.1) |
| Dolby Atmos | Yes |
User Tips
- Wired Surround Speakers: All surround speakers (front and rear) connect via wires to the soundbar. The subwoofer also connects via a wire to the soundbar. Bluetooth is used for connecting the soundbar to your external devices like phones or TVs, not for connecting the speakers to the soundbar.
- Optimal Dolby Atmos Experience: For the best Dolby Atmos sound, ensure your TV's audio output is set to "Pass Through" when using the HDMI eARC/ARC connection. This allows the raw Dolby Atmos signal to be sent directly to the soundbar.
- App for Customization: Utilize the ULTIMEA app to access the 10-band equalizer and 121 preset EQ matrices. This provides a much deeper level of sound customization than the remote control alone.
- Remote Control Convenience: The system is designed so that your TV remote can control the soundbar's basic functions (power, volume) when connected via HDMI eARC/ARC and your TV's CEC function is enabled. This reduces remote clutter.
Warranty and Support
ULTIMEA Technology (Shenzhen) Limited provides support for the Aura A60 soundbar. If you require assistance, please reach out to our service team.
- Phone Support (US): +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- Phone Support (EU): +49 89-628-25828 (Mon-Fri 9am-5pm CET)
- Email Support: support@ultimea.com
- Website: support.ultimea.com
Manufacturer: Ultimea Technology (Shenzhen) Limited
Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District, Shenzhen, China 518000
For the full Declaration of Conformity and details on trademarks (Dolby Atmos, Bluetooth, HDMI), please refer to page 36 of the original user manual PDF.