1. Introduction
The MiBoxer 2.4GHz LED Controllers offer versatile control over various LED strip types, including Single Color, Dual White, RGB, RGBW, and RGB+CCT. These controllers feature both WiFi and 2.4G RF connectivity, enabling control via smartphone apps (Tuya Smart), compatible RF remotes, and third-party voice assistants like Amazon Alexa and Google Assistant. This manual provides detailed instructions for setting up, operating, and maintaining your MiBoxer LED controller.

Figure 1: MiBoxer FUT037W+ (3 in 1) and FUT035W+ (2 in 1) LED Strip Controllers
2. Models Covered
This manual covers the following MiBoxer LED Controller models:
- FUT035W+ (2 in 1 LED Strip Controller): Supports Single Color and Dual White LED strips.
- FUT037W+ (3 in 1 LED Strip Controller): Supports RGB, RGBW, and RGB+CCT LED strips.
- Other models (FUT036W, FUT038W, FUT039W) share similar functionality and setup procedures with the FUT035W+ or FUT037W+ depending on their output type.
3. Key Features
- WiFi + 2.4G Dual Module Design: Enhanced network experience and adaptability.
- Smartphone App Control: Compatible with "Tuya Smart" app for comprehensive control.
- Third-Party Voice Control: Works with Amazon Alexa and Google Assistant (no 2.4GHz gateway needed).
- 2.4G RF Remote Controllable: Control distance up to 30m.
- Output Mode Switching: One-button switching between supported LED strip types (e.g., Single Color/Dual White for FUT035W+, RGB/RGBW/RGB+CCT for FUT037W+).
- Adjustable Color Temperature & Brightness: Smooth transitions without flicker.
- 16 Million Colors: For RGB/RGBW/RGB+CCT models.
- Music Rhythm Function: Lights change color automatically with music.
- Group Control & Device Sharing: Manage multiple lights and share control with family.
- Smart Home Automation: Biorhythm, scene customization, timing settings, sleep/wake plans, 'Do Not Disturb' mode, Tap-to-Run automation.
- PWM High/Low Frequency Switching: Select between 250Hz and 16kHz.
- Signal Transmitting & Modes Synchronization: Extend control range and synchronize multiple fixtures.
- DMX512 Controllable: For RGB+CCT output mode, requires a DMX512 LED transmitter.

Figure 2: WiFi + Bluetooth Dual Module Design and Tuya Smart App Integration

Figure 3: PWM Frequency and Voice Control Support
4. Specifications
4.1. FUT035W+ (2 in 1 LED Strip Controller)
| Parameter | Value |
|---|---|
| Product Name | 2 in 1 LED Strip Controller (WiFi+2.4G) |
| Model No. | FUT035W+ |
| Input Voltage | DC12~24V |
| Output | 12A/Channel |
| Total Output | Max 12A |
| Communication Protocol | WiFi+2.4GHz |
| 2.4G RF Control Distance | 30m |
| Working Temperature | -10~40°C |
| WiFi Standard | IEEE 802.11b/g/n 2.4GHz |
| Bluetooth Protocol | Bluetooth 4.2 (low power consumption) |

Figure 4: FUT035W+ Product Parameters and Dimensions
4.2. FUT037W+ (3 in 1 LED Strip Controller)
| Parameter | Value |
|---|---|
| Product Name | 3 in 1 LED Strip Controller (WiFi+2.4G) |
| Model No. | FUT037W+ |
| Input Voltage | DC12~48V |
| Output | 6A/Channel |
| Total Output | Max 12A |
| Communication Protocol | WiFi+2.4GHz |
| 2.4G RF Control Distance | 30m |
| Working Temperature | -10~40°C |
| WiFi Standard | IEEE 802.11b/g/n 2.4GHz |
| Bluetooth Protocol | Bluetooth 4.2 (low power consumption) |

Figure 5: FUT037W+ Product Parameters and Dimensions
4.3. General Dimensions
- Controller Dimensions: 74.5mm (L) x 35mm (W) x 17mm (H)
- Single Box G.W.: 0.041KGS
- Carton (200PCS): G.W.: 9KGS
5. Setup Instructions
5.1. Wiring the LED Controller
Ensure all power is disconnected before wiring. Connect your LED strip and power supply to the controller according to the diagrams below. Pay close attention to the polarity (V+, V-) and specific output channels (R, G, B, W, CW, WW).

Figure 6: FUT035W+ Wiring Diagram (Input: V+, V-; Output: V+, W, CW, WW, GND, PUSH)

Figure 7: FUT037W+ Wiring Diagram (Input: V+, V-; Output: V+, R, G, B, W, WW, GND, PUSH)
5.2. App Installation and Pairing
- Download and install the "Tuya Smart" app on your smartphone.
- Ensure your controller is powered on.
- To activate WiFi pairing mode, long press the 'SET' button on the controller for 3 seconds until the indicator flashes quickly.
- Follow the in-app instructions to add your device. Ensure your phone is connected to a 2.4GHz WiFi network during pairing.
5.3. Remote Control Linking (Optional)
If using a 2.4G RF remote control:
- Power on the LED controller.
- Press the 'SET' button on the controller 1 time to activate linking mode.
- Follow the remote control's instructions to link it with the controller.

Figure 8: Compatible Mi-Light Remote Controls
6. Operating Instructions
6.1. Switching Output Modes
The controller supports different output modes depending on the model. To switch between modes:
- Press the 'SET' button continuously on the controller to cycle through the available output modes.
- For FUT035W+ (2 in 1), the indicator will show Red for Single Color and Green for Dual White.
- For FUT037W+ (3 in 1), the indicator will show Red for RGB, Green for RGBW, and Blue for RGB+CCT.

Figure 9: FUT037W+ Output Mode Switching and Color Features

Figure 10: FUT035W+ Output Mode Switching and White Light Features
6.2. App Control (Tuya Smart)
Once paired with the Tuya Smart app, you can access a wide range of functions:
- Color/Brightness/Color Temperature Adjustment: Precisely control your lighting.
- Music Rhythm Function: Synchronize lights with music.
- Scene Customization: Create and save custom lighting scenes (e.g., 'Good night', 'Reading', 'Work').
- Group Control: Control multiple MiBoxer devices simultaneously.
- Timing Settings: Schedule lights to turn on/off at specific times.
- Falling Asleep/Waking Up Plan: Gentle fade in/out for sleep and wake cycles.
- Do Not Disturb Mode: Power on 2 times when light is off to activate (suitable for areas with frequent power outages).
- Tap-to-Run / Automation: Create smart scenarios and automations.

Figure 11: Smart Home Features Overview
6.3. PWM Frequency Switching
The controller supports switching between high (16kHz) and low (250Hz) PWM frequencies. This can be adjusted via the app or a compatible remote, if available, to suit your preference and avoid flicker with certain cameras or applications.
6.4. Signal Transmitting and Modes Synchronization
MiBoxer controllers can transmit signals from a remote to other lighting fixtures within 30m. This allows for an extended control range. Additionally, different lighting fixtures can synchronize their modes if they are started at different times but controlled by the same remote, under the same dynamic mode, and within a 30m distance.

Figure 12: Signal Transmitting and Modes Synchronization
7. Maintenance
- Keep the controller in a dry environment, away from moisture and extreme temperatures.
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the device to prevent overheating.
- Regularly check wiring connections for security.
8. Troubleshooting
- Lights not responding to app/remote:
- Check power supply to the controller and LED strip.
- Ensure the controller is within range of your WiFi router (2.4GHz only) or RF remote.
- Re-attempt WiFi pairing (long press 'SET' for 3 seconds) or remote linking (short press 'SET' once). - Incorrect colors or modes:
- Verify the correct output mode is selected by continuously pressing the 'SET' button.
- Check your LED strip type matches the selected mode. - WiFi connection issues:
- Confirm your router is broadcasting a 2.4GHz network. The controller does not support 5GHz WiFi.
- Ensure your phone is connected to the 2.4GHz network during the pairing process.
- Move the controller closer to your WiFi router. - DMX512 control not working:
- Ensure you are using an RGB+CCT LED strip and have a compatible DMX512 LED transmitter connected.
9. User Tips
- Home Assistant Integration: These controllers are known to work well with Home Assistant via Tuya integration, offering advanced automation possibilities.
- App-Only Control: You can use the controller solely with the Tuya Smart app; a physical remote is optional.
- Power Supply Matching: Always ensure your power supply voltage and current capacity match the requirements of your LED strip and controller to prevent damage.
- Wiring Verification: Double-check all wiring connections before applying power to avoid short circuits or incorrect operation.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.