ASOMETECH PP083

Contents

ASOMETECH Magnetic Wireless Power Bank User Manual

Model: PP083

ASOMETECH Magnetic Wireless Power Bank attached to an iPhone

Magnetic wireless power bank attached to a purple iPhone, showing 10000mAh/5000mAh capacity options.

1. Product Overview

The ASOMETECH PP083 is a mini, thin magnetic wireless power bank designed for fast charging. It offers both 10000mAh and 5000mAh capacity options and is compatible with Magsafe-enabled iPhones (15, 14, 13, 12 series). Featuring a precise TFT color display and built-in cables, it provides convenient and efficient power on the go.

Product demonstration video showing magnetic attachment, port identification, wireless charging, internal chip, and simultaneous charging of multiple devices.

2. Setup

2.1 Initial Charging

Before first use, fully charge your power bank using a suitable USB port. The digital display will indicate the battery level.

2.2 Attaching to Device (Magnetic Wireless Charging)

Align the power bank with the back of your Magsafe-compatible iPhone. The strong magnets will securely attach the power bank, and wireless charging will begin automatically.

Hand attaching magnetic power bank to iPhone

Hand attaching the magnetic power bank to a purple iPhone, illustrating convenient and fast charging.

Side view of power bank attached to phone

Side view of the magnetic power bank attached to a phone, showing its thin profile.

2.3 Wired Charging

Connect your device to the power bank using a compatible USB-C or USB-A cable. The power bank supports two-way quick charge for efficient power delivery.

3. Operating Instructions

3.1 Power On/Off

  • Power On: Press the power button once to turn on the device. The TFT color display will light up.
  • Power Off: The display screen will automatically turn off after 20 seconds in a no-input/no-output state.

3.2 Low Current Mode

  • Activate: Double-click the power button to activate low current mode. A lightning bolt icon will light up on the display.
  • Duration: In low current mode, the constant-on mode without operation is set to 2 hours by default.
  • Deactivate: Double-click the power button to exit low current mode.

3.3 RGB Lights

  • Toggle: Triple-tap the power button to switch the RGB lights on or off.
  • Reset: The RGB lights will reset after the product enters screen-off mode.

3.4 Locking Output Mode

  • Lock: Long press the power button for 2 seconds to lock the output. An icon on the digital display screen will indicate the locked state, preventing any input.
  • Unlock: Long press the power button for 2 seconds to exit the locked output mode.

3.5 Display Screen Information

  • Battery Level: The display shows the battery percentage. A red energy bar indicates battery level below 10%.
  • Automatic Turn-off: The display screen will automatically turn off after 20 seconds in a no-input/no-output state. Note: The display will not turn off in low current mode.
  • Port Recognition: The display screen for USB-C1, USB-C2, and USB-A will automatically show input and output recognition.
Digital display showing battery percentage and charging status

Digital display showing battery percentage and charging status.

4. Maintenance

  • Keep the power bank away from water, fire, and extreme temperatures.
  • Avoid dropping or subjecting the device to strong impacts.
  • Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Store in a cool, dry place when not in use for extended periods.

5. Troubleshooting

  • Device not charging:
    • Ensure the power bank is sufficiently charged.
    • Check if the power bank is turned on.
    • Verify that cables are securely connected and undamaged.
    • If using wireless charging, ensure proper alignment with your device's Magsafe area.
    • Check if the output is locked (long press button for 2 seconds to unlock).
  • Display screen remains on:
    • Check if low current mode is activated. The display will not automatically turn off in this mode. Double-click the power button to exit low current mode if not needed.
  • Buttons unresponsive:
    • If the button functions are unresponsive, try resetting them by turning the device off and on, or by exiting any locked modes.

6. Specifications

FeatureDetail
BrandASOMETECH
ModelPP083
Battery Capacity27000mAh / 97.2Wh / 3.6V
Output Capacity18500mAh
Input InterfaceUSB Type C
Output InterfaceLIGHTNING, USB-Type C
FeaturesBuilt-in Cables, Digital Display, Charger & Battery in 1, With Plug
Quick Charge TechnologyTwo-way Quick Charge
Battery TypeLithium battery
Shell MaterialPlastic
CertificationCE
High-concerned chemicalNone
OriginMainland China
TypePortable Power Bank
Type-C1 Input/Output5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A
Type-C2 Input/Output5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A, 28V/5A
USB-A Output5V/3A, 9V/2A, 12V/1.5A, 5V/4.5A
Combined Outputs (Max)C2+USB-A: 140W+22.5W; USB-C1+USBA-C2: 65W+65W; (USB-A C1)+C2: 15W+65W; USB-C1 USB-A: 5V/3A

Note: This portable power bank does not support the use of an electric soldering iron.

7. User Tips

  • For optimal wireless charging, ensure your iPhone is perfectly aligned with the magnetic charging area on the power bank.
  • If the display remains on and drains battery unnecessarily, check if the low current mode is active and deactivate it if not needed.
  • Utilize the multiple output ports to charge several devices simultaneously, sharing the joy of charging.
  • Always use a suitable USB port and cable to charge the power bank itself for efficient and safe recharging.

8. Warranty and Support

For detailed information regarding warranty, returns, and customer support, please refer to the official user manual PDF or contact the seller directly.

You can view the comprehensive user manual in PDF format here: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.